A theoretical study of the electromagnetic properties of ferrocene and the ferrocenium ion

An iterative extended Hückel molecular orbital calculation was used to obtain wave functions for the ground state of ferrocene and several low lying states of the ferrocenium ion. Photoemission spectra in terms of relative ionization potentials and the electric field gradient at the iron nucleus were calculated for ferrocene andg values and the electric field gradient were calculated for the ferrocenium ion. These values are in good agreement with experiment. The nature of the molecular orbitals was compared with results of previous semi-empirical andab initio calculations.     

Free energies of transfer of alkali halides from water to urea-water mixtures at 25°C from EMF measurements

The standard potentials_s E ^o of M/M⁺ (M=Li, Na, K, Rb, and Cs) electrodes in aqueous urea solutions containing 12, 20, 30 and 37% by weight of urea have been determined at 25°C from emf measurements on the cell M(Hg)/MCl (m), solvent/AgCl–Ag, from the activities of metals in amalgams by use of a similar type of cell in water, and from the values of_s E ^o of the Ag/AgCl electrode determined earlier. The standard free energies of transfer of MCl, G _t ^o (MCl), from water to the mixed solvents, computed by use of these values and those for the Ag–AgCl electrode, rise sharply from Li⁺ to Na⁺ but fall from Na⁺ to K⁺ and rather sharply from K⁺ to Cs⁺ with a maximum at Na⁺ in all the solvent compositions. This has been attributed to the superimposition of soft-soft interactions on the electrostatic interactions between the ions and the negative charge centers of the possible hydrogen-bonded solvent complexes in the mixed solvents. Comparison of G _t ^o (i) values for individual ions, obtained by a simultaneous extrapolation procedure, with those in aqueous mixtures of methanol,t-butanol, and dimethyl sulfoxide leads to the conclusion that the solvation of these ions in all these solvents is chiefly dictated by the acid-base type of ion-solvent interactions.     

Cis-trans-isomerization of cationic-anionic polymethine dyes

The effect of solvent polarity and ion pair formation oncis-trans-isomerization of cationic-anionic polymethine dyes and of related simple cationic and anionic dyes is studied by flash photolysis. The change in the rate constant for reversecis-trans- isomerization of photoisomers due to the interaction of a cation with an anion in an ion pair is observed in nonpolar solvents. A drop in the yield of the photoisomers to zero is observed for a number of cationic-anionic dyes in weakly polar and nonpolar solvents which is possibly due to steric hindrances in the photoisomerization process in ion pairs.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 4, pp. 719–724, April, 1993.     

Formation Thermodynamics of Binary and Ternary Lanthanide(III) Complexes with 1,10-Phenanthroline and Chloride in N,N-Dimethylformamide

Formation thermodynamics of binary and ternary lanthanide(III) (Ln = La, Ce, Nd, Eu, Gd, Dy, Tm, Lu) complexes with 1,10-phenanthroline (phen) and the chloride ion have been studied by titration calorimetry and spectrophotometry in N,N-dimethyl-formamide (DMF) containing 0.2 mol-dm^–3 (C₂H₅)₄NClO₄ as a constant ionic medium at 25°C. In the binary system with 1,10-phenanthroline, the Ln(phen)³⁺ complex is formed for all the lanthanide(III) ions examined. The reaction enthalpy and entropy values for the formation of Ln(phen)³⁺ decrease in the order La > Ce > Nd, then increase in the order Nd < Eu < Gd < Dy, and again decrease in the order Dy > Tm > Lu. The variation is explained in terms of the coordination structure of Ln(phen)³⁺ that changes from eight to seven coordination with decreasing ionic radius of the metal ion. In the ternary Ln³⁺-Cl^–-phen system, the formation of LnCl(phen)²⁺, LnCl₂(phen)⁺, and LnCl₃(phen) was established for cerium(III), neodymium(III), and thulium(III), and their formation constants, enthalpies, and entropies were obtained. The enthalpy and entropy values are also discussed from the structural point of view.     

动力学电位法测定硼

本文根据硼酸，苯乙醇酸，孔雀绿形成三元离子缔合型配合物的反应，用孔雀绿离子选择性电极监测反应速率，在最佳实验条件下，用固定时间法，电位变化与硼量在０．２－５．０μｇ／ｍＬ范围呈线性关系，用於测定标准钢样和玻璃标样中的硼，结果与标准值十分接近。     

Analytical study of highly condensed non ionic surfactants. Separation on cation exchangers

Summary This study was aimed at optimizing the separation of non-ionic surfactants, resulting from the condensation of ethylene oxide with natural fatty alcohols in the C₁₆ and C₁₈ range (saturated and unsaturated), and presenting a high degree of condensation, i.e. 20 and 25 ethylene oxide units (Brij 99 and KM 25). The cation exchange stationary phase is a partially ionized silica, conditioned in different ways. We have studied the influence of the nature of cations on the separation selectivity. Cations studied included alkali metals (Li⁺, Na⁺, K⁺, Rb⁺, Cs⁺), alkaline earth metals (Mg²⁺, Ca²⁺, Sr²⁺, Ba²⁺), transition metals (Zn²⁺, Cd²⁺, Hg²⁺, Pb²⁺, Cu²⁺), and quaternary ammonium (NH ₄ ⁺ , NMe ₄ ⁺ ) ions as well as a proton (acetic acid). The influences of ionic strength, pH and addition of cosolvent were examined. A study of the influence of temperature on the system selectivity evidenced a strong interdependance of these two parameters. The optimized conditions [mobile phase: CH₃CN/H₂O (92/8), pH 7.4, sodium acetate 5.10^–3 M; temperature gradient between 25 and 50°C] allowed for the first time the distributions of Brij 99 and KM 25 to be obtained.     

A note on differentiability of the cluster density for independent percolation in high dimensions

The cluster density function of independent percolation in ad-dimensional lattice is considered. For eachn, it is shown that(p) has finitenth leftderivative at critical probabilityp _c ifd is sufficiently large. This result agrees with the Bethe lattice approximation, where thenth one-sided derivative of(p) is bounded atp _c for alln.     

Transference numbers for ultra concentrated solutions of aqueous hydrochloric acid at 25°C

Transference numbers of HCl(aq) solutions at 25°C, from 0.01 to 13.6 mol-kg^–1(m) have been obtained by measuring the emf of cells with transference using hydrogen gas/platinum electrodes. Good agreement is obtained at concentrations up to 1 m with all previous data, and our results strongly corroborate those of King and Spiro over the 2–8m concentration range. The transference numbers of the hydronium ion fit the empirical equation, _H ^HCl = 0.821 + 0.0457m ^1/2 – 2.476×10^–2m – 1.90×10^–4 m ² – 1.45×10^–5 m ³ the maximum deviation in T _H ^HCl being 0.003.     

Microstructural and physicochemical study of the buried Fe/AlGaAs(100) interface by transmission electron microscopy and x‐ray emission spectroscopy

Among the magnetic metal/semiconductor contacts, the Fe/GaAs system has been widely studied owing to its potential applications in electronic devices. In contrast, there are not many studies concerning the Fe/Al_xGa_1?xAs contact, and in particular there are no reports concerning the changes induced in the interfacial zone by the presence of Al. In this work, thin polycrystalline iron films were deposited by ion beam sputtering at room temperature on a 300 nm thick Al_0.25Ga_0.75As layer grown by molecular beam epitaxy onto GaAs(001). X‐ray diffraction analysis showed that the iron films are polycrystalline, and indications of a (002) texture of the film were observed. The fine scale analysis of the interface was achieved by high‐resolution transmission electron microscopy (HRTEM) observations, the results of which are compared with the physicochemical information obtained from electron‐induced x‐ray emission spectroscopy, by analysing the Al 3p valence states at the Fe/Al_xGa_1?xAs interface. The HRTEM experiments on cross‐section samples indicate that the interfacial zone between iron and AlGaAs is limited to <1.5 nm in thickness. X‐ray emission spectroscopy showed the presence of Al atoms in an FeAl‐like environment at the interface, and the existence of wrong bonds and point defects. The estimated width of the perturbed interface (2.0 ± 0.5 nm) is in agreement with the HRTEM results. Copyright © 2003 John Wiley & Sons, Ltd.     

Synthesis of thiol chelating resins and their adsorption properties toward heavy metal ions

A series of chelating resins, derived from a macroreticular styrene-divinylbenzene (2%) copolymer beads grafted with various poly(ethylene glycols) HO? (? CH₂? CH₂? O? )_n? H(n = 0, 4, 9, 13) and containing thiol groups as chelating functions, have been synthesized in a three-step reaction sequence. The structure of the functionalized resins was confirmed by IR spectrophotometry, elemental analysis, and differential scanning calorimetry. The complexation behavior of these thiol resins was investigated towards Hg(II), Cu(II), and Pb(II) ions in aqueous solution by a batch equilibration technique. The influence of pH on adsorption capacity was also examined. The adsorption values for metal ions' intake followed the order Hg(II) > Cu(II) > Pb(II). The affinity of these polymers towards Hg(II) ions was so high that the total mercury level in the liquid decreased from 20 ppm to below 10 ppb after 2 h of treatment. Polymers can be regenerated by washing with a solution of hydrochloric acid (6N) and 10% by weight of an aqueous solution of thiourea. © 1994 John Wiley & Sons, Inc.