Experimental review of the ϒ(1S, 2S, 3S) physics at e+e− colliders and the LHC

The three lowest-lying \mathrm{\Upsilon } states, i.e., \mathrm{\Upsilon }(1S), \mathrm{\Upsilon }(2S), and \mathrm{\Upsilon }(3S), composed of bb¯ pairs and below the BB ¯ threshold, provide a good platform for the researches of hadronic physics and physics beyond the Standard Model. They can be produced directly in e⁺e⁻ colliding experiments, such as CLEO, Babar, and Belle, with low continuum backgrounds. In these experiments, many measurements of the exclusive \mathrm{\Upsilon }(1S) and \mathrm{\Upsilon }(2S) decays into light hadrons, which shed light on the “80% rule” for the Okubo–Zweig–Iizuka suppressed decays in the bottomonium sector, were carried out. Meanwhile, many studies of the charmonium and bottomonium productions in \mathrm{\Upsilon }(1S, 2S, 3S) decays were performed, to distinguish different Quantum Chromodynamics (QCD) models. Besides, exotic states and new physics were also extensively explored in \mathrm{\Upsilon }(1S, 2S, 3S) decays at CLEO, BaBar, and Belle. The \mathrm{\Upsilon }(1S, 2S, 3S) states can also be produced in pp collisions and in collisions involving heavy ions. The precision measurements of their cross sections and polarizations at the large hadron collider (LHC), especially in the CMS, ATLAS, and LHCb experiments, help to understandΥproduction mechanisms in pp collisions. The observation of the sequentialΥsuppression in heavy ion collisions at CMS, LHCb, and ALICE is of great importance for verifying the quark–gluon plasma predicted by QCD. In this article, we review the experimental results on \mathrm{\Upsilon }(1S, 2S, 3S) at e⁺e⁻ colliders and the LHC, and summarize their prospects at Belle II and the LHC.     

基于波长调制-直接吸收光谱方法的CO分子1567 nm处谱线参数高精度标定

直接吸收光谱(DAS)可直接测量分子吸收率函数,并通过拟合吸收率函数确定待测气体参数.波长调制-直接吸收光谱(WM-DAS)在DAS基础上,结合了波长调制光谱(WMS)中谐波分析思想,利用傅里叶变换复现吸收率函数,可有效提高吸收率函数的测量精度.本文利用WM-DAS方法结合长光程气体吸收池,在室温低压条件下,对CO分子1567 nm处R5-R11近红外弱吸收谱线吸收率函数进行了精确复现,其拟合残差标准差低至3×10^-5,随后根据测得的吸收率函数对谱线的碰撞展宽、Dicke收敛以及速度依赖的碰撞展宽系数等光谱参数进行了高精度标定,并将其与高灵敏度的连续波腔衰荡光谱(CW-CRDS)测量结果进行了比较,实验结果表明该方法与CW-CRDS测量结果具有高度一致性,更具有系统简单、测量速度快、对环境要求低等优点.     

Recoil spectrometry: Ion accelerator based elemental characterisation of surface layers

Recoil Spectrometry covers a group of techniques that are very similar to the well known Rutherford backscattering Spectrometry technique, but with the important difference that one measures the recoiling target atom rather than the projectile ion. This makes it possible to determine both the identity of the recoil and its depth of origin from its energy and velocity, using a suitable detector system. The incident ion is typically high-energy (30–100MeV)³⁵C1,⁸¹Br or¹²⁷I. Low concentrations of light elements such as C, O and N can be profiled in a heavy matrix such as Fe or GaAs. Here we present an overview of mass and energy dispersive recoil Spectrometry and illustrate its successful use in some typical applications.     

在Ni系ABO3和A2BO4型复合氧化物催化剂上NO吸附性能的研究

合成了具有钙钛石和类钙钛石结构的复合氧化物ＬａＮｉＯ３，Ｌａ０．１Ｓｒ０．９ＮｉＯ３，Ｌａ２ＮｉＯ４和ＬａＳｒＮｉＯ４。考察了它们对ＮＯ的吸附和ＮＯ直接分解反应的催化性能，结合比表面测定，化学分析，ＸＲＤ和ＮＯ－ＴＰＤ对催化剂的表征结果，探讨了该系列复合氧化物对ＮＯ的吸附规律。     

固相萃取-气相色谱/负化学电离-质谱法测定酸水解植物蛋白及酱油中的3-氯-1,2-丙二醇

建立了酸水解植物蛋白及酱油中3-氯-1,2-丙二醇(3-MCPD)的固相萃取-气相色谱/质谱测定方法。样品经Aoisa-HBL固相萃取柱萃取,正己烷-乙酸乙酯净化提取,七氟丁酰咪唑衍生,衍生物经气相色谱/负化学电离-质谱（GC/NCI-MS）选择离子模式(SIM)检测,外标法定量。3-MCPD的定量检测限为0.5 μg/kg,平均回收率为92.2%～97.4%,相对标准偏差为3.6%～10.9%。该方法检测灵敏度高,定性定量准确。     

La0.8Sr0.2Ga0.8Mg0.2O3与La0.8Sr0.2Ga0.8Mg0.15Co0.05O3电导的对比

采用固相合成法制备了La0.8Sr0.2Ga0.8Mg0.2O3(LSGM8282)和La0.8Sr0.2Ga0.8Mg0.15Co0.05O3 (LSGMC5), 利用四电极交流阻抗法和Hebb-Wagner 极化法对比研究了两种材料的总电导率和电子电导率. 实验结果表明, LSGM8282 的总电导率与氧分压无明显依赖关系, 而LSGMC5 的总电导率在高氧分压区随氧分压降低而增加,在中等氧分压区域基本保持不变. 在973-1173 K的温度范围内, LSGM8282的自由电子电导率以及电子空穴电导率的氧分压级数分别为-1/4和1/4.在1073-1173 K的温度范围内, LSGMC5的自由电子电导率以及电子空穴电导率的氧分压级数分别为-1/4和约为1/8, 表明LSGMC5的空穴产生机制可能与LSGM8282不同. LSGM8282 的氧离子电导率与氧分压无关, 而LSGMC5 的氧离子电导率在高氧分压区随氧分压的减小而增加.     

杯芳烃树枝型酰胺衍生物的合成和对金属离子的识别

杯芳烃树枝型酰胺衍生物的合成和对金属离子的识别;杯芳烃;树枝型化合物;酰胺;离子识别;紫外-可见光谱     

alb聚铝离子稳定性的温度效应及硫酸盐沉淀形态

alb聚铝离子;稳定性;温度效应;硫酸盐沉淀;al-ferron络合比色法     

用于锂离子电池的凝胶聚合物电解质的制备与性能

以丙烯腈(AN)、丙烯酸甲酯(MA)和衣康酸锂(IALi)为自由基共聚反应的主要单体, 采用溶液聚合方法, 合成轻度交联的P(AN-MA-IALi)聚合物电解质膜.通过FTIR, DSC和SEM等测试方法对共聚物的结构进行了表征, 利用交流阻抗等电化学方法对该膜的导电性能进行了研究.实验结果表明, 所制备的交联聚合物的室温电导率达到10-5~10-4 S/cm, 当IALi的质量分数为3%时, 所制备的聚合物电解质膜的电导率最大可达到1.89×10-4 S/cm.