利用低能质子束产生高强度放射性束流

加拿大TRIUMF实验室利用¹¹C成功验证了一种产生高强度(～10⁸ions/s)放射性束流的方法. 该方法不同于普通在线同位素分离方法, 它利用了13MeV的低能强流质子束, 可以产生一系列核天体物理实验感兴趣的高强度放射性束流.     

Radiobiological response of human hepatoma and normal liver cells exposed to carbon ions generated by Heavy Ion Research Facility in Lanzhou

Human hepatoma and normal liver cells were irradiated with ¹²C⁶⁺ ion beams (LET = 96.05 keV/μm) and γ-rays at Heavy Ion Research Facility in Lanzhou (HIRFL). The chromatid breaks and break types were detected using the premature chromosome condensation technique. Our experimental results showed that chromatid breaks seem to have a good relation with ¹²C⁶⁺ absorbed dose and ¹²C⁶⁺ are more effective to induce chromatid breaks as compared to the γ-rays. For ¹²C⁶⁺ ion irradiation the major break was isochromatid break, while chromatid breaks were dominant for γ-ray irradiation. We also observed that the Relative Biology Effectiveness (RBE) of ¹²C⁶⁺ ion is about 2.5 times higher than that of γ-rays.     

A high-current electron beam ion trap as an on-line charge breeder for the high precision mass measurement TITAN experiment

The precision of atomic mass measurements in a Penning trap is directly proportional to the charge state q of the ion and, hence, can be increased by using highly charged ions (HCI). For this reason, charge breeding with an electron beam ion trap (EBIT) is employed at TRIUMF’s Ion Trap for Atomic and Nuclear science (TITAN) on-line facility in Vancouver, Canada. By bombarding the injected and trapped singly charged ions with an intense beam of electrons, the charge state of the ions is rapidly increased inside the EBIT. To be compatible with the on-line requirements of short-lived isotopes, very high electron beam current densities are needed. The TITAN EBIT includes a 6 Tesla superconducting magnet and is designed to have electron beam currents and energies of up to 5 A and 60 keV, respectively. Once operational at full capacity, most species can be bred into a He-like configuration within tens of ms. Subsequently, the HCI are extracted, pass a Wien filter to reduce isobaric contamination, are cooled, and injected into a precision Penning trap for mass measurement. We will present the first results and current status of the TITAN EBIT, which has recently been moved to TRIUMF after assembly and commissioning at the Max-Planck-Institute (MPI) for Nuclear Physics in Heidelberg, Germany.     

Measurement of storage time, estimation of ion number and study of absorption line profile in a Paul trap

Europium (Eu⁺) ions were confined in a Paul trap and detected by non-destructive method. Storage time of Eu⁺ ions achieved in vacuum was improved by orders of magnitude employing buffer gas cooling. The experimentally detected signal was fitted to the ion response signal and the total number of ions trapped was estimated. It is found that the peak signal amplitude as well as the product of FWHM and the peak signal amplitude is proportional to the total number of trapped ions. The trapped ion secular frequency was swept at different rates and its effect on the absorption line profile was studied both experimentally and theoretically.     

Ag implantation-induced modification of Ni–Ti shape memory alloy thin films

Nanocrystalline thin films of Ni–Ti shape memory alloy are deposited on an Si substrate by the DC-magnetron co-sputtering technique and 120?keV Ag ions are implanted at different fluences. The thickness and composition of the pristine films are determined by Rutherford Backscattering Spectrometry (RBS). X-Ray diffraction (XRD), atomic force microscopy (AFM) and four-point probe resistivity methods have been used to study the structural, morphological and electrical transport properties. XRD analysis has revealed the existence of martensitic and austenite phases in the pristine film and also evidenced the structural changes in Ag-implanted Ni–Ti films at different fluences. AFM studies have revealed that surface roughness and grain size of Ni–Ti films have decreased with an increase in ion fluence. The modifications in the mechanical behaviour of implanted Ni–Ti films w.r.t pristine film is determined by using a Nano-indentation tester at room temperature. Higher hardness and the ratio of higher hardness (H) to elastic modulus (E_r) are observed for the film implanted at an optimized fluence of 9?×?10¹⁵ ions/cm². This improvement in mechanical behaviour could be understood in terms of grain refinement and dislocation induced by the Ag ion implantation in the Ni–Ti thin films.     

Theoretical studies on structure and performance of [1,2,5]‐oxadiazolo‐[3,4‐d]‐pyridazine‐based derivatives

Based on energetic compound [1,2,5]‐oxadiazolo‐[3,4‐d]‐pyridazine, a series of functionalized derivatives were designed and first reported. Afterwards, the relationship between their structure and performance was systematically explored by density functional theory at B3LYP/6‐311 g (d, p) level. Results show that the bond dissociation energies of the weakest bond (N–O bond) vary from 157.530 to 189.411 kJ · mol^?1. The bond dissociation energies of these compounds are superior to that of HMX (N–NO_2, 154.905 kJ · mol^?1). In addition, H1, H2, H4, I2, I3, C1, C2, and D1 possess high density (1.818–1.997 g · cm^?3) and good detonation performance (detonation velocities, 8.29–9.46 km · s^?1; detonation pressures, 30.87–42.12 GPa), which may be potential explosives compared with RDX (8.81 km · s^?1, 34.47 GPa ) and HMX (9.19 km · s^?1, 38.45 GPa). Finally, allowing for the explosive performance and molecular stability, three compounds may be suggested as good potential candidates for high‐energy density materials. Copyright © 2016 John Wiley & Sons, Ltd.     

Strategy of improving the stability and detonation performance for energetic material by introducing the boron atoms

A novel stable energetic compound (E)‐1,2‐diamino‐1,2‐dinitrodiboron (DANB) was theoretically designed based on the structure of 1,1‐diamino‐2,2‐dinitroethene (FOX‐7). Atomization method in combination with Hess' law was used to predict the heat of formation. The detonation velocity (D) and detonation pressure (P) of DANB were approximatively estimated by using Kamlet–Jacobs equations. As a result, DANB has huge heat of formation (2013.5 kJ/mol) and specific enthalpy of combustion (?26.4 kJ/g). Furthermore, DANB possesses high crystal density (1.85 g/cm³) and heat of detonation (5476.0 cal/g), which lead to surprising detonation performance (D = 10.72 km/s, P = 51.9 GPa) that is greater than those of FOX‐7 (D = 8.63 km/s, P = 34.0 GPa) and CL‐20 (D = 9.62 km/s, P = 44.1 GPa). More importantly, DANB is very stable because its bond dissociation energy of the weakest bond (BDE = 357.8 kJ/mol) is larger than those of the most common explosives, such as FOX‐7 (BDE = 200.4 kJ/mol), CL‐20(BDE = 209.2 kJ/mol), HMX(BDE = 165.7 kJ/mol), and RDX (BDE = 161.4 kJ/mol). Therefore, our results show that DANB is a promising candidate for stable and powerful energetic material.     

Interrelation between inhomogeneity and cyclability in O3‐NaFe1/2Co1/2O2

O3‐NaFe_1/2Co_1/2O₂ shows initial capacity of 160 mAh/g and an average operating voltage of 3.1 V (vs. Na) with good cyclability, and is a promising candidate of the cathode materials for sodium‐ion secondary batteries (SIBs). Here, we found that the cyclability of the slowly‐cooled sample is much worse than that of quenched one, even though the former sample keeps the O3‐type structure. The energy dispersive X‐ray spectroscopy (EDX) images suggest that the slow‐cooled sample (Na_x Fe_1–yCo_y O₂) is inhomogeneous in the Fe concentration (1 – y), perhaps triggered by the Na deficiency (1 – x). We ascribed the poor cyclability in the slowly‐cooled sample to the concentration inhomogeneity (Δy). The Δy is further responsible for the fluctuation of the lattice constants (a and c), as revealed by the Williamson–Hall plot. (© 2016 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

Fluid simulation of the pulsed bias effect on inductively coupled nitrogen discharges for low-voltage plasma immersion ion implantation

Planar radio frequency inductively coupled plasmas(ICP) are employed for low-voltage ion implantation processes,with capacitive pulse biasing of the substrate for modulation of the ion energy. In this work, a two-dimensional(2D) selfconsistent fluid model has been employed to investigate the influence of the pulsed bias power on the nitrogen plasmas for various bias voltages and pulse frequencies. The results indicate that the plasma density as well as the inductive power density increase significantly when the bias voltage varies from 0 V to-4000 V, due to the heating of the capacitive field caused by the bias power. The N+fraction increases rapidly to a maximum at the beginning of the power-on time, and then it decreases and reaches the steady state at the end of the glow period. Moreover, it increases with the bias voltage during the power-on time, whereas the N_2~+ fraction exhibits a reverse behavior. When the pulse frequency increases to 25 kHz and40 kHz, the plasma steady state cannot be obtained, and a rapid decrease of the ion density at the substrate surface at the beginning of the glow period is observed.