夹芯板轴对称脱层分析的高阶模型

研究了夹芯板轴对称脱层问题的附加状态.利用n阶剪切变形理论和最小势能原理,建立了附加状态的微分方程,给出了相应的定解条件,并求出了附加状态的n次多项式解析解答.与采用实体单元的数值结果的比较表明,随着n的增加,模型的精度迅速提高.该文还研究了附加应力的分布规律及波及范围,并得出一些重要结论.     

Thermodynamics, adsorption kinetics and rheology of mixed protein-surfactant interfacial layers

Depending on the bulk composition, adsorption layers formed from mixed protein/surfactant solutions contain different amounts of protein. Clearly, increasing amounts of surfactant should decrease the amount of adsorbed proteins successively. However, due to the much larger adsorption energy, proteins are rather strongly bound to the interface and via competitive adsorption surfactants cannot easily displace proteins. A thermodynamic theory was developed recently which describes the composition of mixed protein/surfactant adsorption layers. This theory is based on models for the single compounds and allows a prognosis of the resulting mixed layers by using the characteristic parameters of the involved components. This thermodynamic theory serves also as the respective boundary condition for the dynamics of adsorption layers formed from mixed solutions and their dilational rheological behaviour. Based on experimental studies with milk proteins (β-casein and β-lactoglobulin) mixed with non-ionic (decyl and dodecyl dimethyl phosphine oxide) and ionic (sodium dodecyl sulphate and dodecyl trimethyl ammonium bromide) surfactants at the water/air and water/hexane interfaces, the potential of the theoretical tools is demonstrated.The displacement of pre-adsorbed proteins by subsequently added surfactant can be successfully studied by a special experimental technique based on a drop volume exchange. In this way the drop profile analysis can provide tensiometry and dilational rheology data (via drop oscillation experiments) for two adsorption routes — sequential adsorption of the single compounds in addition to the traditional simultaneous adsorption from a mixed solution. Complementary measurements of the surface shear rheology and the adsorption layer thickness via ellipsometry are added in order to support the proposed mechanisms drawn from tensiometry and dilational rheology, i.e. to show that the formation of mixed adsorption layer is based on a modification of the protein molecules via electrostatic (ionic) and/or hydrophobic interactions by the surfactant molecules and a competitive adsorption of the resulting complexes with the free, unbound surfactant. Under certain conditions, the properties of the sequentially formed layers differ from those formed simultaneously, which can be explained by the different locations of complex formation.     

等离子接枝处理的CF/PAA复合材料层间剪切强度及其形貌研究

采用等离子技术对碳纤维(CF)进行接枝芳基乙炔(PAA)处理,研究了影响CF／PAA复合材料层间剪切强度(ILSS)的因素。结果表明,经等离子接枝PAA处理后,复合材料的ILSS有了很大提高。SEM显示经接枝处理后CF和PAA树脂之间的界面结合紧密,改善了复合材料的界面结合性能。     

Shear and extensional rheology of entangled polymer melts: Similarities and differences

This work extends our previous understanding concerning the nonlinear responses of entangled polymer solutions and melts to large external deformation in both simple shear and uniaxial extension. Many similarities have recently been identified for both step strain and startup continuous deformation, including elastic yielding, i.e., chain disentanglement after cessation of shear or extension, and emergence of a yield point during startup deformation that involves a deformation rate in excess of the dominant molecular relaxation rate. At a sufficiently high constant Hencky rate, uniaxial extension of an entangled melt is known to produce window-glass-like rupture. The present study provides evidence against the speculation that chain entanglements tie up into dead knots in constant-rate extension because of the exponentially growing chain stretching with time. In particular, it is shown that even Instron-style tensile stretching, i.e., extending a specimen by applying a constant velocity on both ends, results in rupture. Yet, in the same rate range, the same entangled melt only yields in simple shear, and the resulting shear banding is clearly not a characteristic of rupture. Thus, we conclude that chain entanglements respond to simple shear in the manner of yielding whereas uniaxial extension is rather effective in causing some entanglements to lock up, making it impossible for the entanglement network to yield at high rates.     

Shear‐Induced Morphological Change in PP/LLDPE Blend

The morphology of a PP/LLDPE blend (50 : 50) by phase dissolution at high shear rate combined with dynamic packing injection molding at low shear rate was investigated by atomic force microscopy. Phase dissolution under high shear rate is manifested by a co‐continuous two‐phase structure that could be broken down to an island‐like structure when a low shear rate is applied via dynamic packing injection molding or simply by manual deformation.     

Rheology of polystyrene solutions around the coil overlapping concentration: A phenomenological description of stresses in simple shear flow

Linear viscoelasticity behavior is described with the sum of two terms for polystyrene solutions in tricresyl phosphate around the coil overlapping concentration (K. Osaki, T. Inoue, & T. Uematsu, J Polym Sci Part B: Polym Phys 2001, 39, 211). One is a Rouse–Zimm (RZ) term represented by the Zimm theory with arbitrarily chosen values of the hydrodynamic interaction parameter and the longest relaxation time (τ_RZ). The other (the L term) consists of a relaxation mode with a single relaxation time (τ_L > τ_RZ) and a high‐frequency limiting modulus proportional to the square of the concentration. In this study, we describe the viscosity (η) and first normal stress coefficient (Ψ₁) in steady shear with simple formulas. The stress due to the L term is assumed to be given by a Kaye, Bernstein, Kearsley, and Zapas (K‐BKZ) equation with the damping function h(γ) = (1 + 0.2γ²)^?1/2, where γ is the magnitude of shear. Contributions to η and Ψ₁ from the RZ term are derived from the RZ model, in which the relaxation time in steady flow is given by τ_st = τ + (τ_RZ ? τ)/(1 + 0.35τ_RZ γ˙) instead of τ_RZ. Here, γ˙ is the rate of shear, and τ is the τ_RZ value at the infinite dilution limit. η and Ψ₁ at various concentrations for two polystyrene samples (with molecular weights of 2890 and 8420 kg mol^?1) are well described with parameters derived from dynamic viscoelasticity. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 1038–1045, 2002     

Effect of the Mixture Composition on Shear and Extensional Rheology of Recycled PET and ABS Nanocomposites

Summary: Recycled PET as well as ABS - organomodified montmorillonite nanocomposites were prepared via melt compounding in a counter-rotating twin screw extruder. The topological changes in polymer matrices as dependency on clay modification have been evaluated from dynamic experiments in the shear flow using low amplitude oscillatory measurements. Flow characteristics of all studied organoclay nanocomposites showed shear-thinning behavior at low frequencies. Filling of PET with some organoclays led to degradation reactions, which were reflected by lower magnitudes of viscosity and storage modulus in the range of higher frequencies as compared to unfilled polymer matrix. On the contrary, no degradation during the processing of different organoclays with recycled ABS has been observed.     

The physical aging phenomenon of 6FDA‐durene polyimide hollow fiber membranes

The aging phenomenon of asymmetric 6FDA‐durene polyimide hollow fibers spun with different shear rates for gas separation has been investigated. The permeances and selectivities of different gases, such as H₂, O₂, N₂, CH_4, and CO₂, were experimentally determined as a function of time for around five months at room temperature. It was found that the gas permeation fluxes of the uncoated and silicone rubber‐coated hollow fibers decreased significantly during the first 30 days following fabrication and then slightly deteriorated thereafter. In the early stage of aging, because of different molecular orientations and skin morphologies induced by shear rates, the percentage of permeance drop for uncoated fibers increased with increasing shear rates, then decreased with increasing shear rates. The permeance of 6FDA‐durene hollow fibers coated with silicone rubber dropped more significantly than the uncoated fibers, implying that silicone rubber coating did affect the aging behavior. This might be due to the fact that silicone rubber layer hindered the molecular relaxation and tightened interface molecules between the dense selective layer and silicone rubber, thus the selectivity increased with aging. Thermal analysis data suggest two processes occurring simultaneously during the aging: one is the relaxation of shear oriented chains, and the other is the densification of chain packing through the reduction of interstitial space among chains. The former has been confirmed by an increase in CTE, while the latter was confirmed by an increase in the peak of β‐relaxation temperature. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 765–775, 2000     

Magnetic phase transitions in nanostructures induced by shear stress under high pressure

Magnetic phase transitions of the first and second order were revealed by Mössbauer spectroscopy in nanosystems of - and -ferric oxides and metallic europium subjected to shear stress (240°) under high pressure (20 kbar). For - and -ferric oxide nanoclusters, the Curie (Neel) points decreased to 300 K, whereas for nanostructured europium the Neel point increased from 90 to 100 K. The thermodynamic model of magnetic phase transitions predicting a change in the character of magnetic phase transitions and a decrease (increase) in the critical Neel (Curie) points in nanoclusters was developed. The type of magnetic phase transitions and the change in the critical points were caused by defects in nanoclusters, whose maximum concentration was observed for the clusters with the 20—50 nm size range.     

Alternating Current Electrohydrodynamics Induced Nanoshearing and Fluid Micromixing for Specific Capture of Cancer Cells

We report a new tuneable alternating current (ac) electrohydrodynamics (ac‐EHD) force referred to as “nanoshearing” which involves fluid flow generated within a few nanometers of an electrode surface. This force can be externally tuned via manipulating the applied ac‐EHD field strength. The ability to manipulate ac‐EHD induced forces and concomitant fluid micromixing can enhance fluid transport within the capture domain of the channel (e.g., transport of analytes and hence increase target–sensor interactions). This also provides a new capability to preferentially select strongly bound analytes over nonspecifically bound cells and molecules. To demonstrate the utility and versatility of nanoshearing phenomenon to specifically capture cancer cells, we present proof‐of‐concept data in lysed blood using two microfluidic devices containing a long array of asymmetric planar electrode pairs. Under the optimal experimental conditions, we achieved high capture efficiency (e.g., approximately 90 %; % RSD=2, n=3) with a 10‐fold reduction in nonspecific adsorption of non‐target cells for the detection of whole cells expressing Human Epidermal Growth Factor Receptor 2 (HER2). We believe that our ac‐EHD devices and the use of tuneable nanoshearing phenomenon may find relevance in a wide variety of biological and medical applications.