Influence of cell and LC parameters on the dynamics of STN liquid crystal displays

The dynamics of super-twisted nematic (STN) liquid crystal displays have rarely been studied. In this article, the dynamic response of STN is analysed in detail. The evolution of director configuration with time was obtained by solving Ericksen–Leslie hydrodynamic equations. The time varying midlayer tilt angle is presented as a measure of dynamic response. The influence on STN dynamics of cell parameters including pretilt angle, twist angle, cell thickness, and of material parameters including d/p, K ₂₂, K ₃₃, were studied.     

附加压力与分散系统的稳定性

较详细地讨论了附加压力与分散系统稳定性间的关系,指出分散相附加压力的降低是分散系统趋向稳定的根本原因。以乳状液为例,附加压力降低不仅减少了液滴间相互碰撞的概率,而且更重要的是,它与液滴表面形成牢固的保护膜密切相关。只有当液滴的附加压力趋近0时,分散系统才达到热力学上稳定的状态,此时乳状液已变成了微乳状液。上述讨论也基本适用于固/液分散系统。     

Distributing points uniformly on the unit sphere under a mirror reflection symmetry constraint

Uniformly distributed point sets on the unit sphere with and without symmetry constraints have been found useful in many scientific and engineering applications. Here, a novel variant of the Thomson problem is proposed and formulated as an unconstrained optimization problem. While the goal of the Thomson problem is to find the minimum energy configuration of N electrons constrained on the surface of the unit sphere, this novel variant imposes a new symmetry constraint – mirror reflection symmetry with the x–y plane as the plane of symmetry. Qualitative features of the two-dimensional projection of the optimal configurations are briefly mentioned and compared to the ground-state configurations of the two dimensional system of charged particles laterally confined by a parabolic potential well.     

Estimation of the total population moving into and out of the 20 km evacuation zone during the Fukushima NPP accident as calculated using “Auto-GPS” mobile phone data

The first objective data showing the geographical locations of people in Fukushima after the Fukushima Dai-ichi nuclear power plant accident, obtained by an analysis of GPS (Global Positioning System)-enabled mobile phone logs, are presented. The method of estimation is explained, and the flow of people into and out of the 20 km evacuation zone during the accident is visualized.     

Synthesis and optical nondestructive evaluation of GaN nanorods on silicon surfaces with gold catalyst

Nanometric gallium-nitride rods were grown on a silicon (1 1 1) substrate through a chemical vapor deposition process with gold particles as the catalyst. Randomly distributed gallium-nitride rods of 20–200 nm in diameter and of various densities and lengths were formed under different deposition conditions. Characterization analyses, such as scanning electron microscopy and optical reflection spectroscopy, have been carried out on samples containing gallium-nitride rods different in size, shape, length and density. While the scanning electron microscopy shows directly the images of the sample surfaces, the optical spectroscopy provides a nondestructive evaluation of the sample surfaces, especially helpful for checking the uniformity of the samples.     

Recent advances of ultrasonic testing of cement based materials at early ages

To summarize some of the most important findings in the field of ultrasonic (US) testing of early age hydration and formation of structure of different cement based materials (CBMs), a review of literature with focus on US P-wave transmission and S-wave reflection methods is presented in this paper. The review shows a great ability of both US techniques to observe setting phenomena and to determine different milestones during the early age formation of CBM’s microstructure. Clear physical basis, high accuracy, and non-destructive nature of the method indicate that US methods could become standardized in the near future.     

The thermophysical properties of low‐temperature Pb plasma

The thermophysical properties of low‐temperature Pb plasma are calculated at temperatures 10–100 kK and densities below 0.2 of the solid‐state value. The thermodynamic values (pressure and internal energy) and transport coefficients (electrical conductivity, thermal conductivity, and thermal power) are considered. The plasma composition and thermodynamic parameters are obtained within the chemical approach, namely by means of the solution of the corresponding system of the coupled mass action law equations. Atom ionization up to +4 is taken into consideration. The electronic transport coefficients are calculated within the relaxation time approximation. The results obtained by means of the present model are compared with the available data of other models and experiments.     

Internal plasticization of poly(vinyl) chloride using glutamic acid as a branched linker to incorporate four plasticizers per anchor point

Internal plasticization of polyvinyl chloride (PVC) using thermal azide‐alkyne Huisgen dipolar cycloaddition between azidized PVC and electron‐poor acetylenediamides incorporating a branched glutamic acid linker resulted in incorporation of four plasticizing moieties per attachment point on the polymer chain. A systematic study incorporating either alkyl or polyethylene glycol esters provided materials with varying degrees of plasticization, with depressed T_g values ranging from ?1 °C to 62 °C. Three interesting trends were observed. First, T_g values of PVC bearing various internal plasticizers were shown to decrease with increasing chain length of the plasticizing ester. Second, branched internal plasticizers bearing triethylene glycol chains had lower T_g values compared to those with similar length long‐chain alkyl groups. Finally, thermogravimetric analysis of these internally plasticized PVC samples revealed that these branched internal plasticizers bearing alkyl chains are more thermally stable than similarity branched plasticizers bearing triethylene glycol units. These internal tetra‐plasticizers were synthesized and attached to PVC‐azide in three simple synthetic steps. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 1821–1835