氘代聚合物膜靶制备技术与性能研究

 氘代聚合物膜是快点火基础物理实验的一种重要靶型。通过氘代苯乙烯单体的本体自由基聚合反应制备氘代聚苯乙烯，并利用流延法和浇铸法制备出厚度从几十nm到数百μm的膜靶。溶剂挥发过程中的随机扰动对膜厚均匀性造成影响，采用清洁的基片和在涂沫基片或模具外加防护罩可以降低这种影响。采用PVA作脱膜剂有利于获得较薄的聚合物薄膜。DSC分析表明薄膜的玻璃化转变温度与热处理过程有关，缓慢退火有利于提高Ｔ-g和储能模量。     

提高YBCO块材在外磁场中悬浮力

本给出了三种提高YBCO块材在外磁场中悬浮力的方法．第一种方法是增强外磁场，对于此方法，本研究了一块直径为30mm的圆柱状YBCO块材分别在圆柱状NdFeB永磁体和NdFeB永磁导轨上的悬浮力．测量结果表明在77K温度下YBCO块在圆柱状NdFeB永磁体上的最大悬浮力为50N，在NdFeB永磁导轨上的最大悬浮力为103．ON．第二种方法是提高YBCO块材自身的性能，包括临界电流密度、俘获磁通和块材尺寸，对于此方法，本仅研究了块材尺寸对悬浮力的影响．三块直径分别为30mm、35mm、40mm的圆柱状YBC0块材在NdFeB永磁导轨上的悬浮力被测量，77K温度下5mm悬浮间距时的悬浮力分别为103．ON、134．5N、175．ON．第三方法是将YBCO块材变成准永久磁体，此种情况下，直径为40mm的圆柱状YBCO块材在77K温度下5mm悬浮间距时的悬浮力高达218．3N．     

小阶跃反应性输入时点堆中子动力学方程的解析解

对小阶跃反应性输入（0<ρ,０<β）且有温度反馈时点堆中子动力学方程进行了研究. 导出任意初始功率条件下核反应堆功率、反应性与时间的解析表达式. 分析和讨论了初始功率与输入小阶跃反应性的大小对功率、反应性变化规律的影响，得到了一些新的结果. 关键词： 中子动力学 反应性 点堆 温度反馈     

一些高Tc超导体的弹性性质

 本文用超声相比较方法测定了高T_c超导体La_1.85Sr_0.15CuO₄，La₂CuO₄和YBa₂Cu₃O₇的纵波和横波声速，进而导出了它们的纵向模量、切变模量、杨氏模量、泊松比、德拜温度及定体比热。在La_1.85Sr_0.15CuO₄样品上，还进行了压力实验，发现所有弹性模量都是随压强增加而增加。定体比热c_V和泊松比σ在高压下则略有下降。德拜温度是随压强增加而增加的。     

Behaviors of the positive temperature coefficient of resistance of poly(styrene‐co‐n‐butylacrylate) filled with Ni‐plated core‐shell polymeric particles

Conductive composite films of poly(styrene‐co‐n‐butylacrylate) copolymers filled with low‐density, Ni‐plated core‐shell polymeric particles were prepared and their behaviors of positive temperature coefficient of resistance (PTCR) were investigated. When the conductive fillers in the composite film were loaded beyond the critical volume, 10 up to 25 vol %, composite films exhibited a unique electrical resistant transition behavior, which the electrical resistance rapidly increased by several orders of magnitude at the critical temperature. The PTCR transition temperature, in general, occurred before the glass transition temperature of polymer matrix. Further increased the conductive filler loading to 30 vol %, the overpacked conduction paths were formed in the entire composite and the PTCR effects became blurred. While the composite film treated with thermal cycle several times from room temperature up to 120 °C, the electrical resistivity increased accompanied with the shift of the PTCR transition to lower temperature. The reason might have been caused by the formed interfacial cracks within the composite film. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 322–329, 2007     

Study on the Photophysical Process in N-Phenyl Phenothiazine and N-(2-Pyridine) Phenothiazine

By the measurements of the solvent and temperature effects of the fluorescence emission spectra and lifetime of N-phenyl phenothiazine (PHZ) and N-(2-pyridine) phenothiazine (PYZ),the existence of strongly twisted intramolecular charge transfer (TICT) state in PYZ emission spectra is proved.The exciplex formed by PHZ, PYZ and dimethyl terephthalate (DMTP) is investigated, and moreover, the transient absorption spectra of positive and negative ions as the results of the dissociation of the exciplex in the polar solvents is observed through the flash photolysis.     

A New Flow Instrument for Conductance Measurements at Elevated Temperatures and Pressures: Measurements on NaCl(aq) to 458 K and 1.4 MPa

A new flow electrical conductance instrument was constructed and tested on dilute NaCl solutions up to 458 K, and on more concentrated solutions (maximum 0.436 mol⋅kg⁻¹) at 373 K. The results of the new instrument agreed with those of previous authors within the estimated experimental errors. The model of Bernard et al. (J. Phys. Chem. 96, 3833–3840 (1992), MSA) was found to represent the high-temperature results without introducing an ion-pairing equilibrium constant. The Fuoss–Hsia conductance equation as given by Fernandez-Prini was found to represent the dilute concentrations with Λ° (NaCl) as the only adjustable parameter. It was found that Λ° (NaCl) could be expressed as a function of solvent viscosity and density by using three parameters found by regression of literature results between 278.15 and 523 K. This equation along with the FHFP theory permits the equivalent conductivity of dilute sodium chloride solutions to be calculated within the accuracy of the existing experimental measurements.     

Phenomenological πN→ππN amplitude and the modelling of the Olsson–Turner and Chew–Low approaches

The phenomenological amplitude for the reaction πN→ππN fixed by fittings to the experimental data in the energy region 0.300 ≤P _Lab≤ 500 MeV/c is used for modelling the Chew–Low extrapolation and Olsson–Turner threshold approach. It is shown that the uncritical application of the former results in enermous theoretical errors, the extracted values being in fact random numbers. The results of the Olsson–Turner method are characterized by significant systematic errors coming from unknown details of the isobar physics. Received: 10 December 1997     

Stability and convergence of modified Ishikawa iterative sequences with errors in Banach spaces

Summary Some stability and convergence theorems of the modified Ishikawa iterative sequences with errors for asymptotically nonexpansive mapping in the intermediate sense and asymptotically pseudo contractive and uniformly Lipschitzian mappings in Banach spaces are obtained.