Underlay mechanism in lift-drag phase diagrams for shear flow over cylinder

The characteristics of a uniform-shear flow over a circular cylinder are in- vestigated numerically by using the alternative-direction implicit （ADI） algorithm and a fast Fourier transform （FFT） one in the exponential-polar coordinates for Re = 150 and 0 ≤ K ≤ 0.46. The diagram of lift-drag phase, implying the detail information about the fluctuations of drag and lift as well as the flow patterns in the wake and fluctuating pres- sure on the cylinder surface, is used to describe the effects of the shear rate on the flow. Results show that the upper （or lower） closed curve of a phase diagram corresponds to the first （or second） half shedding cycle. The lift-drag phase diagram will move down-left with the increase of shear rate K such that the lift is exerted from the upper side to the lower side, and the drag on the first half shedding cycle is smaller than that on the second half.     

On continuum modeling using kinetic-frictional models in high shear granulation

This short communication demonstrates why extreme caution has to be taken when applying conven- tional kinetic-frictional closures to continuum modeling of high shear granulation （HSG）, Conventional models refer to closure laws where the kinetic and frictional stresses are summed up to obtain the total stress field, In the simple, dense, and sheared system ofa Couette shear cell, the effect of the lack of scale separation on the model predictions is examined, both quantitatively and qualitatively. It is observed that the spatial resolution has a significant effect on the magnitude of the kinetic and frictional contributions to the solid phase stresses. With this new investigation and previous studies of HSG, it is concluded that conventional kinetic-frictional models are inadequate for continuum modeling of HSG.     

Analysis on secondary instability of shear layer based on the concept of phase synchronization

A concept of phase synchronization point is proposed, and then a model is built using this concept to explain secondary instabilities. This model has been used to determine the conditions of K- and H-type secondary instabilities, which are coincident with the conditions published in literatures. It also can be used to analyze other secondary instability phenomena. For example, the numerical results validate the analysis results in the case of 1/3rd subharmonic mode secondary instability. Furthermore, the numerical results indicate that the spanwise wave number of 3D disturbance has significant effect on the secondary instability.     

Parametric resonance with a point-vortex pair in a nonstationary deformation flow

The movement of a pair of point vortices with arbitrary intensities, embedded in a nonstationary shear and rotational flow, is studied. The expression for the vorticity center is shown to be reduced to a Riccati equation. In the particular case of harmonic oscillations, parametric resonance, which results in unbounded motion of the vortex pair, is found and analyzed. Using the fast oscillation averaging, an analytical estimate for the main zone in the parametric space is obtained. With the help of numerical calculations, the reliability of the estimate is asserted and a family of the minor zones is obtained.     

注凝成型制备氧化锆增韧氧化铝陶瓷

采用低毒单体N,N-二甲基丙烯酰胺(DMAA)制备了氧化锆增韧氧化铝(ZrO2/Al2O3,ZTA)陶瓷,氧化铝与氧化锆的质量比为3∶1,浆料的固相体积分数为50 vol%。讨论了不同干燥方式对干燥速率以及坯体性能的影响,研究了不同成型温度对坯体性能的影响。通过研究发现,在湿热烘箱中干燥的坯体强度最高,成型温度应控制在65℃附近。通过对不同单体含量的坯体烧结后陶瓷性能的对比,发现单体的加入量为10wt%左右较好,通过与干压成型陶瓷性能的对比,发现注凝成型得到的陶瓷强度和韧性分别提高了42.2%和23.5%,达到640 MPa和6.3MPa.m1/2,通过扫描电镜图片分析发现,注凝成型制得的陶瓷结构更均匀。     

Kinetics of Lysozyme Crystallization From Solution

Abstract

We suggest that the growth of molecular aggregates is the rate-controlling step in the crystallization of lysozyme from pH buffered aqueous solutions of strong electrolytes. We propose that the aggregation reaction passes through a charged transition state whose rate of formation is accelerated by Debye-Huckel screening and whose charge is stabilized by ion exchange with the solution. Applying the theory of the “primary kinetic salt effect”, we predict that the half-life for decay of the lysozyme concentration in solution in contact with a growing crystal should decrease linearly with the square root of the ionic strength. This prediction is confirmed experimentally in the case of lysozyme crystals precipitating at 4°C from pH buffered aqueous solutions of sodium chloride.     

Zinc Ion Uniquely Induced Triple Shape Memory Effect of Dipole–Dipole Reinforced Ultra‐High Strength Hydrogels

In this study, we demonstrate that dipole–dipole interaction can be employed to not only tremendously enhance the mechanical properties of hydrogel, but also impart the gel to an amazing ability to memorize two temporary shapes. Cross‐linked hydrogels synthesized by copolymerization of acrylonitrile, a dipole–dipole containing monomer and hydrophilic comonomer are shown to exhibit triple shape memory (SM) triggered by the dynamic association and dissociation of dipole–dipole pairing between cynao groups uniquely responding to zinc ion species and concentration. This approach contributes to design and fabrication of novel SM hydrogels in a distinct way from conventional SM materials.     

Strength of metals at the Fermi length scale

Using silver and gold, we have measured the size‐dependence of the yield strength of atomic‐sized samples as small as a single‐atom bridge, with pico‐level resolution in the applied force and displacement. The strength approaches theoretical values as the diameter of the sample becomes comparable to the Fermi wavelength of electrons (～0.5 nm); in the limit of a single‐atom bridge, the strength is over four orders of magnitude higher than in bulk single crystals. Results provide direct evidence for Pauling's prediction of bond stiffening with reduced atomic coordination. Beginning with a single‐atom bridge, strength evolves in a staircase manner in Ag, instead of the intuitively assumed continuous approach to a saturating bulk value.

     

Continuously Dislocated Elastic Bodies with a Neo-Hookean Like Energy Subjected to Anti-plane Shear

In this paper, we consider a materially uniform but inhomogeneous body and we are interested in three particular cases of inhomogeneities corresponding to three distinct distributions of dislocations. The field of defects enters the equilibrium equations through the components of the tensor field describing the relaxation procedure. We examine what form should these components take in order for the material to admit states of anti-plane shear. The results obtained in this paper hold for a class of materials that obey a specific form for the stored energy function. In the special case of no dislocations, this class falls under the well known class of Neo-Hookean materials.      

Evaluation and prediction of fatigue resistance of metals from the kinetics of variation in surface properties

The paper studies the fatigue resistance of metallic samples subjected to high-cycle loading and microhardness measurement. The fatigue damage of materials during loading is identified as decrease in the thickness of the barrier surface layer, which prevents fatigue failure. It is shown that the thickness of this layer is independent of the plastic characteristics of the material and the level of stress. A method to evaluate accumulated fatigue damage is developed. Kinetic curves of damage accumulation are analyzed. Methods to predict fatigue characteristics are proposed __________ Translated from Prikladnaya Mekhanika, Vol. 44, No. 3, pp. 86–95, March 2008.