BaSO4-CaCO3-CaF2基高发射率建筑保温隔热涂料的制备研究

以自制BaSO4-CaCO3-CaF2为功能填料,水性丙烯酸乳液为成膜物质,钛白粉和滑石粉为体质颜料,辅以多种功能助剂,按一定配比混合经搅拌和球磨制得高发射率建筑保温隔热涂料.采用XRD、FT-IR及光谱发射率等手段分析表征了功能填料的结构和红外功能特性,研究了钛白粉添加量、功能填料添加量及搅拌时间分别对涂料太阳光反射比、隔热温差及稳定性的影响,优化了涂料最佳配比.结果表明:功能填料在7～20μm波段内平均发射率为0.89;钛白粉和功能填料添加量分别为16;和30;,搅拌时间为23 h时,涂层隔热温差可达18.4℃,涂料红外光谱发射率最高可达0.93,在7～20 μm波段内平均发射率为0.90,涂层具有良好的保温隔热效果.     

半圆形容器等离子体源离子注入过程中离子动力学的两维PIC计算机模拟

利用两维particle-in-cell方法研究了半圆形容器表面等离子体源离子注入过程中鞘层的时空演化规律. 详尽考察了鞘层内随时间变化的电势分布和离子密度分布规律,离子在鞘层中的运动轨迹和运动状态,得到了半圆容器内、外表面和边缘平面上各点离子注入剂量分布规律,获得了工件表面各点注入离子的入射角分布规律. 研究结果揭示了半圆容器边缘附近鞘层中离子聚焦现象,以及离子聚焦现象导致工件表面注入剂量分布和注入角度分布存在很大不均匀的基本物理规律. 关键词： 等离子体源离子注入 鞘层 两维particle-in-cell方法 离子运动轨迹     

表面绝缘铝平面丝阵Z箍缩实验研究

在"强光一号"装置(1.3 MA,100 ns)上进行了镀2μm聚酰亚胺绝缘膜平面铝丝阵与普通铝丝阵Z箍缩对比实验研究.实验结果表明,表面绝缘能够影响Z箍缩内爆动力学和辐射特性.通过简单理论分析,表面绝缘可能会增加初始阶段的能量沉积和参与内爆的质量;表面绝缘对于抑制平面丝阵多峰现象有明显作用,然而在所进行的实验中,并未观察到对X射线产额的改善作用.     

Radiation properties of microstrip patch antenna covered with an anisotropic dielectric layer and a plasma sheath

By using SO-FDTD method, radiation properties of microstrip patch antenna covered with an anisotropic dielectric layer and a plasma layer are investigated. Simulation results show that the resonant frequency of antenna covered with a plasma layer varies with different plasma parameters. It has been indicated that the frequency offset of antenna is as high as 120 MHz when plasma frequency changes from 1 GHz to 8 GHz. The effect on antenna covered with an anisotropic dielectric layer is analyzed, while altering the dielectric constant or thickness of dielectric layer. Finally, the peak gain of antenna in complex plasma environment is presented in detail.     

碳化硅块状气凝胶的制备及应用

碳化硅气凝胶具有高温稳定性、低热膨胀系数、良好的抗热震性以及抗氧化和耐腐蚀等优异的性质,在高温和高腐蚀性环境下的隔热、电磁吸波、过滤和吸附等领域具有较大的应用潜力。然而,块状碳化硅气凝胶的可控制备一直是一项较大的挑战。本文综述了块状碳化硅气凝胶在制备工艺和应用两个方面的研究进展,首先分析总结了各种制备工艺及其优缺点,包括有机/SiO₂复合气凝胶碳热还原法、预陶瓷化聚合物裂解法、化学气相沉积法、高温气相渗硅法和碳化硅纳米线组装法;然后,详细介绍了碳化硅气凝胶在高温隔热和电磁吸波两个领域的应用研究进展;最后,展望了碳化硅气凝胶未来的若干发展方向。     

Operational theory and instrumental implementation of the thermal gradient programmed gas chromatography (TGPGC) mode of analysis

Thermal gradient programmed gas chromatography (TGPGC) separations involve the application of three-dimensional thermal field programming. The operational aspects associated with TGPGC are such that rapid GC analyses can be achieved for complex and broad-volatility-range samples using open tubular columns with high thermal compliance, physical compactness, and geometric conformity. Elapsed times for TGPGC analyses of complex samples have ranged from 50 to 300 s. The application of rapidly changing thermal fields (or temperature surfaces) in TGPGC is accomplished through the use of a column sheath assembly. Recent research has centered upon different column sheath assembly designs and instrumental implementation of the TGPGC mode of operation. The instrumental implementation of the TGPGC mode for conducting GC and GC-MS analyses places special demands upon the design and performance of numerous operational aspects of the system, e.g., the response-time characteristics associated with analyte detection and the analytical output signal handling capabilities.     

More accurate breakdown voltage estimation for the new step-up test method in the gumbel distribution model

The estimation problems for the conventional step-up method (the observed breakdown voltages are not given at all) and the new step-up method (some of the observed breakdown voltages are given) are analyzed when the underlying probability distribution (of breakdown voltage level) is assumed to be gumbel distributions for minima and maxima. The new step-up test method has advantages compared to the conventional method: (1) the confidence intervals of the estimates become smaller and (2) the estimates can be obtained with higher probability. In some case of real step-up breakdown voltage test, a fit of the gumbel distribution to the data case is found to be superior to that of the normal distribution, which suggests the usefulness of the gumbel distribution for the underlying distribution in the step-up breakdown voltage test.     

新型列车侧墙内装板声学分析、优化及应用*

为了开发与应用新型列车车体降噪内装结构,基于混合FE-SEA法对轨道车辆用新型橡胶泡棉夹芯板进行隔声与声辐射预测建模,并进行了试验验证,进而利用该模型分析了橡胶泡棉孔隙率与芯皮厚度比对其隔声性能、声辐射性能的影响规律,并通过敷设阻尼层优化了其声学性能。最后,在侧墙组合结构的声学设计中评价了其实际应用效果。结果表明：随着孔隙率的逐步下降,橡胶泡棉夹芯板隔声量上升趋势较为明显,而辐射声功率持续降低;随着芯皮厚度比的逐步提高,夹芯板隔声量呈略微上升趋势,辐射声功率则相应降低。在远离声源一侧的橡胶泡棉蒙皮外侧敷设阻尼层的效果最优,优化后夹芯板计权隔声量提高0.7dB,总声功率级降低0.7dB;相较于传统木质胶合板和铝蜂窝板,橡胶泡棉夹芯板相较于传统内装板材在结构隔声设计中具有轻量化优势。     

Backscatter factor and absorption ratio of fibrous zirconia media in the visible

Fibrous thermal insulations are widely used to conserve energy in ambient to high temperature applications including buildings, solar collectors, heat exchangers, furnaces and thermal protection systems of reusable launch vehicles. It has long been recognised that zirconia has the lowest thermal conductivity of commercial refractories. The thermal conductivity of a zirconia fibrous medium is strongly dependent of its bulk density; high bulk densities of zirconia fibers provide the most effective insulation at high temperatures. Lee's theory for radiative transfer through fibrous media is used in this paper. The two-flux model is applied to determine the backward and forward parameters of a medium of zirconia fibers oriented in parallel planes. Theoretical calculations of the backscatter factor and absorption ratio of this medium are carried out in the visible spectrum for different size parameters of the fibers and for three different temperatures. Our results show that the backscatter factor of zirconia fibrous insulations is maximum, and therefore the heat transfer by the fibrous medium is the lowest, for a size parameter of 0.45 for all the temperatures studied. We also observed that the backscatter factor decreases with increasing temperature.