Synthesis and characterization of 1-phenyl-3-alkylbenzimidazol-2-ylidene salts and their catalytic activities in the Heck and Suzuki cross-coupling reactions

The synthesis and characterization of 1-phenyl-3-alkyl-substituted carbene precursors that were prepared from 1-phenyl substituted benzimidazole and various alkyl halides are reported. The new benzimidazolium salts (1a–e) were characterized by ¹H NMR, ¹³C NMR, FT-IR spectroscopic methods and elemental analyses. New in situ generated palladium-benzimidazolium complexes were tested for catalytic activity in the Mizoroki-Heck and Suzuki-Miyaura cross-coupling reactions.     

New band systems of NiBr molecule in visible region

Thermal emission spectrum of NiBr molecule excited by vacuum graphite tube furnace revealed the existence of ten new band sub-systems in the region λλ 5540-4720 Å which were attributed toA→X,B→X,C→X andD→X transitions. Vibrational analysis was carried out for each of the systems mentioned above.A ² Δ has been suggested as the ground state of NiBr molecule with an electronic interval of about 533 cm^?1. Transitions responsible for NiBr spectrum appear to be of the type²π–²Δ and²Δ–²Δ.     

Metal-doped apatitic calcium phosphates: preparation,characterization, and reactivity in the removal of hydrogen sulfide from gas phase

With the expansion of human activities, there are more and more living areas adjacent to industrial and/or agricultural activities such as chemical processes, petroleum processes, paint finishing, food processing, livestock farming, composting plants etc. Bad odor is part of several nuisances caused by industrial and/or agricultural activities. Hydrogen sulfide (H₂S) is a typical odorous molecule which causes foul odor at very low concentration. This molecule is formed in different industrial installations, in particular in coal combustion, and petrochemical refinery. The separation and/or transformation of H₂S from gas phase to odorless products are important processes for sustainable development. In this paper, we communicate the preparation of new sorbents for the sorption of H₂S from a synthetic gas effluent. These sorbents consist in an inorganic phase (hydroxyapatite) as host particles, and well-dispersed particles of a metal oxide as guest particles which are the active phase for the removal of H₂S. At room conditions, iron, lead, and zinc doped calcium phosphates were found to be effective for the removal of H₂S. The performance of the sorbents depends on preparation method and the nature of active phases. This opens new prospects for the treatment of H₂S from gas phase.     

Ion Exchange Separation of Eu3+ from Different Salt Solutions

Two samples of potassium zinc hexacyanoferrate were prepared using two different ratios of the initial materials. The distribution coefficient of Eu³⁺ on the two samples was determined. The effect of the cation concentration in the aqueous phase on the adsorption of Eu³⁺ was also studied. The mechanism of the exchange process was described on the light of the data obtained, and the equilibrium constant of the exchange reaction was also calculated.     

Sample Preparation for the Determination of Metals in Food Samples Using Spectroanalytical Methods—A Review

Abstract

The present article gives an overview of recent publications and modern techniques of sample preparation for food analysis employing atomic and inorganic mass spectrometric techniques, such as flame atomic absorption spectrometry, chemical vapor generation atomic absorption and atomic fluorescence spectrometry, graphite furnace atomic absorption spectrometry, inductively coupled plasma optical emission spectrometry, and inductively coupled plasma mass spectrometry. Among the most frequently applied sample preparation techniques for food analysis are dry ashing, usually with the addition of an ashing aid, and acid digestion, preferably with the assistance of microwave energy. Slurry preparation, particularly with the assistance of ultrasound, is increasingly used to reduce acid consumption and sample preparation time. Direct analysis of solid samples is gaining importance in the field of food analysis as it offers the highest sensitivity, avoids the use of acids and other aggressive reagents, makes possible the analysis of micro‐samples, and can be applied for fast screening analysis, e.g., of fresh meat.     

Preparation and characterization of vinyltriethoxysilane based inorganic–organic gel glasses dispersed 4′-n-pentyl-4-cyanobiphenyl nematic liquid crystal

Vinyltriethoxysilane based inorganic–organic glasses dispersed with 4′-n-pentyl-4-cyanobiphenyl nematic liquid crystal are designed to fabricate a new type of gel glass dispersed with liquid crystal. Scanning electron microscopy shows that the nematic liquid crystal phase, occupying the interconnected cavities, is continuously embedded in the inorganic–organic matrixes. The effect of the nematic liquid crystal weight concentration on the morphology is investigated. The differential scanning calorimetry shows that the nematic-isotropic transition temperature depends on the nematic liquid crystal weight concentration. The Raman spectra show that there are no obvious Raman frequency shifts, compared with pure nematic liquid crystal. The in situ diffuse reflectance FTIR spectra show that the integral intensity of bands of hydroxyls has not varied.     

ZnO纳米棒／MEH-PPV异质结的复合电致隧穿发光

利用低温水热法生长的ZnO纳米棒（ZnO-NRs）,和p型有机半导体材料聚[2-甲氧基-5-（2-乙基己氧基）-1,4-苯撑乙烯撑]（MEH-PPV）复合制备了结构为“ITO/ZnO晶种/ZnO-NRs/MEH-PPV/Al”的发光器件。测试结果发现,该器件具有非常好的二极管整流特性。对ZnO-NRs/M EH-PPV异质结施加超过17 V的反向偏压时,可同时获得两种半导体材料的发光,且ZnO近紫外光（380 nm ）发射强度远大于 M EH-PPV的红橙光强度,发光功率随着反向偏压的增加迅速增强,然而施加正向偏压时未探测到发光。该器件的发光机理不同于其他文献报道的正偏压发光,而属于反偏压发光器件,其发光机理归因于有机无机复合异质结的界面特殊性和ZnO-NRs的纳米尺寸效应,反偏压下器件实现的是载流子隧穿发光,而正偏压时载流子以表面态的无辐射复合及漏电流方式消耗。     

Study of the spontaneous formation of organic layers on carbon and metal surfaces from diazonium salts

This study investigates the spontaneous grafting of different para-substituted phenyl groups on carbon and metallic surfaces from diazonium salts solutions. Glassy carbon, nickel, zinc and iron plates were allowed to react with an acetonitrile solution of aryldiazonium tetrafluoroborate salt by simple dipping. The surfaces were characterized before and after their immersion by XPS and AFM to evidence the formation of a coating on the different materials. The results are indicative of the presence of substituted phenyl groups on all the investigated surfaces. This study also aims at correlating grafting efficiency with metal reactivities and diazonium salt electronic properties by means of AFM and FT-IRRAS. For this purpose, zinc and nickel were chosen due to their opposite reducing properties and two diazonium salts were selected with electron-donor or -withdrawing para-substituents. The results tend to indicate that redox properties of both partners (diazonium + metal) are of prime importance for grafting to occur.     

Characterisation of the Ru/MgF2 catalyst with adsorbed O2, NO, CO probe molecules by EPR and IR spectroscopy

Electron paramagnetic resonance (EPR) and infrared (IR) spectroscopy were used to study the formation of ruthenium and adsorbed species appearing on the catalyst during O₂, NO, and CO adsorption at room temperature on 1 wt% Ru/MgF₂ catalysts prepared from Ru₃(CO)₁₂ . Both EPR and IR results provided clear evidence for the interaction between surface ruthenium and probe molecules. No EPR signals due to ruthenium (Ru) species were recorded at 300 and 77 K after H₂-reduction of the catalyst at 673 K. However, at 4.2 K a very weak EPR spectrum due to low-spin (4d⁵) Ru³⁺ complexes was detected. A weak anisotropic O₂^- radicals signal with g_∣∣=2.017 and g_⊥=2.003 superimposed on a broad (ΔB_pp=120 mT), slightly asymmetric line at g=2.45(1) was identified after O₂ admission to the reduced sample. Adsorption of NO gives only a broad, Gaussian-shaped EPR line at g=2.43(1) indicating that the admission of NO, similarly to O₂ adsorption, brings about an oxidation of Ru species in the course of the NO decomposition reaction. Introduction of NO over the CO preadsorbed catalyst leads to EPR spectrum with parameters g_⊥=1.996, g_∣∣=1.895, and A_⊥^N=2.9 mT assigned to surface NO species associated with Ru ions. The IR spectra recorded after adsorption of NO or CO probe molecules showed the bands in the range of frequency characteristic of ruthenium nitrosyl, nitro, and nitrate/nitrite species and the bands characteristic of ruthenium mono-and multicarbonyls, respectively. Addition of CO after NO admission to the catalyst leads to appearance in the IR spectrum, beside the ones characteristic of NO adsorption, the bands which can be attributed to Ru-CO₂ and Ru-NCO species, indicating that the reaction between NO and CO occurs. These species were also detected after CO adsorption followed by NO adsorption, additionally to the band at 1850 cm⁻¹ being due to cis-type species.     

Progress in Developments of Inorganic Nanocatalysts for Application in Direct Methanol Fuel Cells

Significant progress has been made in the last few years toward synthesizing highly dispersible inorganic catalysts for application in the electrodes of direct methanol fuel cells. In addition, research toward achieving an efficient catalyst supporting matrix has also attracted much attention in recent years. Carbon black- (Vulcan XC-72) supported Platinum and Platinum-Ruthenium catalysts have for long served as the conventional choice as the cathode and the anode catalyst materials, respectively. Oxygen reduction reaction at the cathode and methanol oxidation reaction at the anode occur simultaneously during the operation of a direct methanol fuel cell. However, inefficiencies in these reactions result in a generation of mixed potential. This, in turn, gives rise to reduced cell voltage, increased oxygen stoichiometric ratio, and generation of additional water that is responsible for water flooding in the cathode chamber. In addition, the lack of long-term stability of Pt-Ru anode catalyst, coupled with the tendency of Ru to cross through the polymer electrolyte membrane and eventually get deposited on the cathode, is also a serious drawback. Another source of potential concern is the fact that the natural resource of Pt and the rare earth metal Ru is very limited, and has been predicted to become exhausted very soon. To overcome these problems, new catalyst systems with high methanol tolerance and higher catalytic activity than Pt need to be developed. In addition, the catalyst-supporting matrix is also witnessing a change from traditionally used carbon powder to transition metal carbides and other high-performance materials. This article surveys the recent literature based on the advancements made in the field of highly dispersible inorganic catalysts for application in direct methanol fuel cells, as well as the progress made in the area of catalyst-supporting matrices.