磷酸钡钙∶铈、锰红色荧光粉的研制

采用高温固相反应合成了磷酸钡钙∶铈、锰红色荧光粉。借助TG,XRD,荧光粉相对亮度仪、荧光分光光度仪等手段系统研究了合成过程中原料化学组成及配比、合成条件对磷酸钡钙∶铈、锰发光性能的影响。结果表明,荧光粉基质(BaxCa1-x)3(PO4)2具有畸变的Ca3(PO4)2结构。该荧光粉中Ce3+是助激活剂,Mn2+是激活剂,由Ce3+→Mn2+的能量传递使Mn2+激发产生650 nm左右的发射,当Ce3+和Mn2+浓度相等且都为0.15时,荧光粉有最高的红色发射亮度。     

Direct Electrochemistry of Cytochrome c on EDTA-ZrO2 Organic-inorganic Hybrid Film Modified ElectrodesState Key Laborator3.＂ of Chemo／Biosensing and Chemometrics, Hunan Universit3; Changsha. Hunan 410082. China

A composite film of ethylenediamine tetraacetic acid (EDTA)‐ZrO₂ organic‐inorganic hybrid was prepared based on the chelation between Zr(IV) and EDTA. The direct electrochemical behavior of cytochrome c (cyt. c) at the hybrid film modified glassy carbon electrodes was investigated. The immobilized EDTA can promote the redox of heme in horse heart cyt. c which gives rise to a pair of reversible redox peaks with a formal potential of 40 mV (vs. SCE). The peak current increased linearly with the increase of cyt. c concentration in the range of 1.6 × 10^?6—8.0 × 10^?5 mol·L^?1 with the correlation coefficient of 0.996. Further investigation shows that metal ions can impede the electron transfer of cyt. c. The impediment capability of metal ions depends on their coordination capability with EDTA and their valence number.     

A comparative study of various computational approaches in calculating the structure of pyridoxal 5'-phosphate (PLP)-dependent beta-lyase protein. The importance of protein environment

Various computational approaches, using molecular mechanics (Amber), semiempirical (AM1), density functional (B3LYP), and various ONIOM methods, have been comparatively investigated for the structure of Escherichia coli NifS CsdB protein. The structure of the entire monomer containing 407 amino acid residues and 579 surrounding water molecules has been optimized. The full geometry optimization in the "active site-only" approach (including only active site atoms) has been found to give the largest root-mean-square (RMS) deviation from the X-ray structure; a much better agreement has been achieved by keeping the atoms leading to the backbones of some amino acids frozen in their positions in the X-ray structure. The best agreement has been attained by including the surrounding protein in the calculations using the two-layer ONIOM (B3LYP:Amber) approach. The results presented in this study conclusively demonstrate the importance of the protein/active-site interaction on the active-site structure of the enzyme. The present theoretical study represents the largest system studied at the ONIOM level to date, containing 7992 atoms, including 84 atoms in the QM region and rest in the MM region.     

Characterization of quasi-one-dimensional S=1/2 Heisenberg antiferromagnets Sr2Cu(PO4)2 and Ba2Cu(PO4)2 with magnetic susceptibility, specific heat, and thermal analysis

Properties of Sr₂Cu(PO₄)₂ and Ba₂Cu(PO₄)₂ having [Cu(PO₄)₂]_∞ linear chains in their structures with Cu-O-P-O-Cu linkages were studied by magnetic susceptibility (T=2-400 K, H=100 Oe) and specific heat measurements (T=0.45-21 K). Magnetic susceptibility versus temperature curves, χ(T), showed broad maxima at T_M=92 K for Sr₂Cu(PO₄)₂ and T_M=82 K for Ba₂Cu(PO₄)₂ characteristic of quasi-one-dimensional systems. The χ(T) data were excellently fitted by the spin susceptibility curve for the uniform S=1/2 chain (plus temperature-independent and Curie-Weiss terms) with g=2.153(4) and J/k_B=143.6(2) K for Sr₂Cu(PO₄)₂ and g=2.073(4) and J/k_B=132.16(9) K for Ba₂Cu(PO₄)₂ (Hamiltonian H=JΣS_iS_i+1). The similar J/k_B values were obtained from the specific heat data. No anomaly was observed on the specific heat from 0.45 to 21 K for both compounds indicating that the temperatures of long-range magnetic ordering, T_N, were below 0.45 K. Sr₂Cu(PO₄)₂ and Ba₂Cu(PO₄)₂ are an excellent physical realization of the S=1/2 linear chain Heisenberg antiferromagnet with k_BT_N/J<0.34% together with Sr₂CuO₃ (k_BT_N/J≈0.25%) and γ-LiV₂O₅ (k_BT_N/J<0.16%). Sr₂Cu(PO₄)₂ and Ba₂Cu(PO₄)₂ were stable in air up to 1280 and 1150 K, respectively.     

Flow amperometric detection of indigo for enzyme-linked immunosorbent assays with use of screen-printed electrodes

A simple and automated methodology for a sensitive electrochemical detection of enzyme immunoassays that employ alkaline phosphatase (AP) as label has been developed. A flow injection system with programmable pump, valve and cell functions, amperometric detection of indigo and screen-printed electrodes (SPEs) are responsible for the advantages of this methodology. Amperometric detection at a low potential of indigo, the product of the enzymatic hydrolysis of the substrate 3-indoxyl phosphate (IP), is combined with a flow injection system. This incorporates in the flow cell a disposable screen-printed board provided with a graphite working electrode. No electrode pretreatment is necessary to obtain reproducible signals. The system was applied to the determination by an enzyme-linked immunosorbent assays (ELISA) of pneumolysin (PLY), a toxin related to respiratory infections. Linear calibration curves for low and high concentration ranges were obtained. These were also performed in a proteic matrix and linearity was also obtained.     

Ozone as an oxygen source for alkene ene-reactions

Summary A strategy was developed which uses the adduct of ozone and triphenyl phosphite as a substitute for photochemically generated singlet oxygen in ene reactions of olefins. The resulting allylic hydroperoxide can be conveniently reduced by a second mole of phosphite to yield the corresponding allylic alcohol. The aryl phosphate produced as the by-product can either be recycled by reduction or used itself as a commodity. As an example, the two key steps of the rose oxide synthesis involving singlet oxygen can thus be reduced to a one pot procedure. With respect to the reaction mechanism, additional arguments for the direct reaction of the olefin with the phosphite ozonide were gathered. A simple decomposition of the ozonide to produce singlet oxygen was made rather unlikely.

---

Ozon als Sauerstoffquelle für En-Reaktionen von Olefinen

Zusammenfassung Es wurde eine Strategie zum Ersatz von photochemisch erzeugtem Singlett-Sauerstoff durch das Addukt aus Ozon und Triphenylphosphit zum Einsatz in En-Reaktionen von Olefinen entwickelt. Das entstehende allylische Hydroperoxid kann durch ein zweites Molekül Phosphit einfach zum entsprechenden allylischen Alkolhol reduziert werden. Das als Nebenprodukt entstehende Arylphosphat kann entweder durch Reduktion recycliert oder direkt als Handelsware weiterverwendet werden. Auf diese Weise können zum Beispiel die beiden Stufen der Rosenoxidsynthese, an denen Singlett-Sauerstoff beteiligt ist, zu einer Eintopfreaktion vereinfacht werden. Bezüglich des Reaktionsmechanismus wurden zusätzliche Hinweise auf die direkte Reaktion des Phosphitozonids mit dem Olefin gefunden. Eine Zersetzung des Ozonids unter Bildung von Singlettsauerstoff ist nicht wahrscheinlich.

     

Sm2O3掺杂CeO2纳米粉体的烧结动力学

对Sm2O3掺杂CeO2纳米粉体的烧结性能进行了研究, 得出等速烧结过程中试样的线收缩率、密度、气孔率随烧结温度的变化规律, 它们随烧结温度的变化均呈"S"型曲线关系, 利用非线性回归了等速烧结过程动力学方程. 结果表明, Sm2O3掺杂CeO2纳米粉体的烧结过程分为3个阶段, 当烧结温度低于1000 ℃时, 线收缩率与密度变化较小, 处于烧结的初期; 在1000～1400 ℃时, 随着烧结温度的升高, 线收缩率与体积密度急剧增大, 材料开始烧结并致密化; 当烧结温度高于1400 ℃时, 线收缩率与体积密度趋于一恒定值, 材料已经致密化. 由归一化速率方程可知, 在T=1225 ℃时, 材料的烧结致密化速率最大.     

混合溶剂火焰原子吸收法直接测定原油中的镍

混合溶剂火焰原子吸收法直接测定原油中的镍刘广东袁存光张丙华刘文钦（石油大学（华东），山东东营２５７０６２）彭力（中国石油天然气总公司环保处，北京１００７２４）关键词原油，混合溶剂，无机盐标准，原子吸收法，镍测定原油中，微量元素镍、钒、铁、铜的存在对...     

Selective flow injection analysis of ultra-trace amounts of Cr(VI), preconcentration of it by solvent extraction, and determination by electrothermal atomic absorption spectrometry (ETAAS)

A rapid, robust, sensitive and selective time-based flow injection (FI) on-line solvent extraction system interfaced with electrothermal atomic absorption spectrometry (ETAAS) is described for analyzing ultra-trace amounts of Cr(VI). The sample is initially mixed on-line with isobutyl methyl ketone (IBMK). The Cr(VI) is complexed by reaction with ammonium pyrrolidine dithiocarbamate (APDC), and the non-charged Cr(VI)–PDC chelate formed is extracted into IBMK in a knotted reactor made from PTFE tubing. The organic extractant is separated from the aqueous phase by a gravity phase separator with a small conical cavity and delivered into a collector tube, from which 55 μl organic concentrate is subsequently introduced via an air flow into the graphite tube of the ETAAS instrument. The operations of the FI-system and the ETAAS detector are synchronously coupled. A significant advantage of the approach is that matrix constituents, such as high salt contents, effectively are eliminated. The extraction procedure was optimized by a simplex approach. A central composite design was subsequently employed to verify the estimated operational optimum. An 18-fold enhancement in sensitivity of Cr(VI) was achieved after preconcentration for 99 s at a sample flow rate of 5.5 ml min⁻¹, as compared to direct introduction of 55 μl of sample, yielding a detection limit (3σ) of 3.3 ng l⁻¹. The sampling frequency was 24.2 samples h⁻¹. The proposed method was successfully evaluated by analyzing a NIST Cr(VI)-reference material, synthetic seawater and waste waters, and waste water samples from an incineration plant and a desulphurization plant, respectively.     

The structural phase transitions of aminoguanidinium(1+) dihydrogen phosphate—study of crystal structures, vibrational spectra and thermal behavior

Aminoguanidinium(1+) dihydrogen phosphate was prepared by crystallization from aqueous solution. On the basis of the results of DSC measurements, X-ray structural analysis was carried out at temperatures of 160, 215 and 293 K for three aminoguanidinium(1+) dihydrogen phosphate phases ( |Z=2|non-ferroic |melting point 408 K; II |201-222 K|(2) |Z=2|non-ferroic|-; III |<201 K|(2)|Z=4|non-ferroic|-). The triclinic unit cell dimensions (a=6.8220(2), b=7.1000(2), c=7.4500(2) Å, α=86.925(2)°, β=80.731(2)°, γ=79.630(2)°, V=350.21(2) Å³—phase I) are similar for all three structural phases with the exception of phase III, where doubling of the c-axis length leads to an increase in the volume to 692.34(3) Å³. The crystal structure of all three modifications consists of parallel layers of dihydrogen phosphate anions that are interconnected by aminoguanidinium(1+) cations through hydrogen bonds of the N-H…O type. The planar aminoguanidinium(1+) cations are oriented almost parallel to each other and are perpendicular to the anion layers. The primary differences amongst phases I, II and III lie in the location of the H atom in the short O-H…O bonds connecting the dihydrogen phosphate anions in layers. The FTIR and FT Raman spectra of natural and deuterated compounds were recorded and interpreted. The FTIR spectra were studied down to a temperature of 90 K.