无机纳米管材料合成进展

无机材料的微观结构决定了材料的许多特性,如传输行为、催化活性、分离效率、粘附、储存和释放动力学。具有管状结构纳米尺度的材料由于其特殊的结构及由此带来的特殊性能正成为一个令人兴奋的化学研究领域。文章综述了近年来无机纳米管材料的合成途径和进展。     

A Novel Photoproduct of 1, 3-Dimethyluracil in Phosphate Buffered-saline

1, 3-Dimethyluracil （DMU） in phosphate buffered-saline （PBS, pH=8） was irradiated by a medium pressure mercury lamp （MPML） and produced a novel compound C6H9N2O6P. The composition and structure of the compound has been identified by elemental analysis, EIMS, UV, IR, ^1H and ^31P-NMR.     

Synthetic analogs of active centers of iron-sulfur proteins: Reactions with phosphates

The interaction of synthetic analogs of active centers of iron-sulfur proteins with phosphates of different structures was studied. It was shown that the process involves ligand exchange and obeys the first-order reaction kinetic equation. The most rapid exchange occurred with the most acidic compound diphenyl phosphate.A. E. Arbuzov Institute of Organic and Physical Chemistry, Kazan' Scientific Center, Russian Academy of Sciences, 420083 Kazan'. Translated from Izvestiya Akademii Nauk, Seriya Khimicheskaya, No. 10, pp. 2301–2305, October, 1992.     

溶剂萃取法制备Co(PO_3)_2超细微粉

本文用溶剂萃取法成功地制备了偏磷酸钴超细微粉并通过ＸＲＤ，ＩＲ，ＴＧ，ＤＴＡ，ＴＥＭ等实验对超细微粉的组成、结构进行了表征。     

CePO_4/Ce-ZrO_2可加工陶瓷性能与断裂机制研究

以Ce ZrO2为基体,通过复合不同加入量的第二相CePO4颗粒,研究了陶瓷材料力学性能的变化,并借助加载能谱仪(EDS)的扫描电子显微镜(SEM)对材料弯曲断口及压痕裂纹扩展方式进行分析。当CePO4加入量为25%时,虽然材料力学性能有一定下降,但已经能用WC刀具进行加工。材料的弯曲断口显示,CePO4在两相体系中的断裂呈层片状形式;加入CePO4后,由于两相之间弱结合界面的存在,压痕裂纹扩展形式发生明显变化,由连续扩展机制过渡为不连续扩展。由这两种机制形成的材料断裂过程是阶段性的,在实际中可以用作材料最终破坏前的预报。     

Microwave assisted low temperature synthesis of sodium zirconium phosphate (NaZr<Subscript>2</Subscript>P<Subscript>3</Subscript>O<Subscript>12</Subscript>)

Sodium zirconium phosphate [NaZr₂P₃O₁₂], a potential ceramic matrix for fixation of high level nuclear waste, was synthesized by heating the mixture of sodium carbonate [Na₂CO₃], zirconyl nitrate hydrate [ZrO(NO₃)₂·5H₂O] and ammonium dihydrogen phosphate [NH₄H₂PO₄] in air, in a resistance heated furnace and a microwave heating system respectively in the temperature range 450 to 650°C. The mixture heated for 1 h in a resistance furnace at 450°C yielded a poorly crystalline NaZr₂P₃O₁₂ [NZP]. Increasing the temperature to 650°C produced a highly crystalline product. The same mixture heated in a microwave oven at 450°C for 1 h however, yielded the most crystalline NZP.In an alternate method, the mixture of sodium dihydrogen phosphate (NaH₂PO₄), zirconium dioxide (ZrO₂) and diammonium hydrogen phosphate [(NH₄)₂HPO₄] heated in resistance furnace at 650°C for the same period did not react in air. It also did not yield the pure product at 450°C when heated in microwave assembly for 1 h.The authors thank the Board of Research in Nuclear Sciences (BRNS) of the Department of Atomic Energy (DAE) for the financial support for this work under the project No. 2000/37/19/BRNS/1959 dtd09-02-02.     

二羟基丙酮磷酸酯的合成

本文报道由3-氯-1,2-丙二醇(1)经七步反应,合成二羟基丙酮磷酸酯缩乙酮(7)的方法,总收率43%。在温和条件下,7可以水解为游离的二羟基丙酮磷酸酯(8)。     

Tributyl phosphate degradation by immobilized cells of aCitrobacter sp.

Tributyl phosphate (TBP), a plasticizer and solvent, is used in nuclear fuel reprocessing, generating TBP wastes laden with residual uranium. ACitrobacter sp. accumulated heavy metals via a phosphohydrolase(s) that precipitated metals with inorganic phosphate liberated from an organic phosphate “donor” molecule (TBP). Mutant analysis suggested that TBP hydrolysis was not attributable to a previously documented acid phosphatase (monoesterase). Purified monoesterase had little activity against phospho di- and triesters, had no requirement for Mg²⁺ or Mn²⁺, and was EDTA-resistant. Conversely, TBP cleavage by immobilized cells was enhanced by Mg²⁺, and ininhibited by Mn²⁺ and EDTA. A separate phosphotri/diesterase was implicated.     

Y2O3, La2O3, Sm2O3对氧化铝瓷烧结及力学性能的影响

研究了3种稀土氧化物对氧化铝陶瓷烧结性能和力学性能的影响.结果表明 含Y2O3,La2O3,Sm2O3的添加剂促进了氧化铝瓷的烧结,提高了氧化铝瓷的力学性能.Y2O3和Sm2O3掺量为0.50%,La2O3掺量为0.75%时氧化铝瓷在1600或1620 ℃保温2 h烧结,相对密度达98.9%以上,强度超过439 MPa,断裂韧性达5.15 MPa·m1/2以上.微观结构分析表明,Y2O3,La2O3,Sm2O3抑止氧化铝晶粒生长,细化晶粒,使晶粒尺寸较均匀形成致密化结构.     

Synthesis and characterization of mixed-morphology CePO4 nanoparticles

Cerium phosphate nanoparticles with diameters of 10-180 nm were synthesized by a variety of solution techniques. X-ray diffraction (XRD) determined the crystalline phase(s) present in each sample. Population, shift, and spin-lattice relaxation ³¹P solid-state nuclear magnetic resonance (NMR) measurements accounted for all the ³¹P nuclei expected in each sample, and were able to distinguish between phosphorous nuclei in different environments and phases. Transmission electron microscopy (TEM) characterized the morphology and crystallinity of the powder samples as well as of the sintered compacts of the powders. In conjunction with TEM, energy-dispersive spectroscopy (EDS) provided a measure of the composition of the bulk intergranular regions within each CePO₄ sample. The presence of an amorphous, phosphate-rich intergranular phase was found in those samples prepared by dissolution of ceria in H₃PO₄ under various conditions.