Synthetic analogs of active centers of iron-sulfur proteins: Reactions with phosphates

The interaction of synthetic analogs of active centers of iron-sulfur proteins with phosphates of different structures was studied. It was shown that the process involves ligand exchange and obeys the first-order reaction kinetic equation. The most rapid exchange occurred with the most acidic compound diphenyl phosphate.A. E. Arbuzov Institute of Organic and Physical Chemistry, Kazan' Scientific Center, Russian Academy of Sciences, 420083 Kazan'. Translated from Izvestiya Akademii Nauk, Seriya Khimicheskaya, No. 10, pp. 2301–2305, October, 1992.     

海螵蛸入药部分和废弃部分8种无机元素分析

为合理开发利用海螵蛸 ,用原子吸收分光光度法测定了海螵蛸中入药部分和废弃部分中8种人体必需无机元素含量。结果表明 ,入药部分和废弃部分中钙含量丰富 ,分别达到 742 1 3× 1 0 - 3和 65 9 76× 1 0 - 3。入药部分铜、铁含量较废弃部分高 ,分别为 9 41× 1 0 - 6 、 91 86× 1 0 - 6 和2 3 5× 1 0 - 6 、 2 5 7× 1 0 - 6 。废弃部分含锌丰富 ,为 3 5 3 62× 1 0 - 6 ,数倍于入药部分 64 65× 1 0 - 6 。可见海螵蛸入药部分和废弃部分均具有良好的开发前景     

Spatially Confined Tungstate Ion Polymerization in Microcapsules

A new approach for performing the WO₄²⁻ polymerization reaction exclusively inside polyelectrolyte capsules of a micron scale size is demonstrated. This approach is based upon a pH gradient across the capsule shell (2.5 inside the capsule volume and 6.5 outside the capsule) caused by encapsulated poly(styrene sulfonate) molecules. During the first stage of the reaction, different polytungstate anions were synthesized. Crystalline WO₃ nanoparticles were formed inside the capsule as the final polymerization product.

The tungstate ion polymerization confined within a micron‐sized polyelectrolyte capsule described herein.     

Influence of target surface degradation on the properties of r.f. magnetron‐sputtered calcium phosphate coatings

This paper reports a detailed study of how repeated r.f. magnetron sputtering from a hydroxyapatite (HA) powder target affects the nature and reproducibility of a sequential series of thin‐film coatings deposited onto Ti6Al4V substrates. An evaluation of the effective lifespan of the HA sputter targets and the reproducibility of the calcium phosphate (CaP) coatings produced from them has been made from Fourier transform infrared spectroscopy, XPS and, as appropriate, atomic force microscopy and SEM/energy dispersive x‐ray analyses. The annulus region of the target surface, from which sputtering under r.f. magnetron conditions normally occurs, showed severe surface degradation after only one deposition run, as indicated by significant PO₄^3? and OH^? depletion. This deterioration continued after each subsequent deposition cycle but to a much lesser extent than that observed in the initial sputtering period. The layers produced from all of the sputter runs contained the expected Ca²⁺ and PO₄^3? species characteristic of a CaP system but were OH^? deficient in the as‐deposited state. However, the chemical and morphological properties of the coatings did not change significantly until after the third consecutive sputter cycle. Hence, these data indicate that, even though a significant level of degradation of the HA target occurs at the outset of the sputtering procedure, the general plasma conditions employed here have a dominant influence on the coating properties until a critical degradation condition is met. As such, the compacted HA powder targets of interest can have a life‐cycle greater than single usage without detriment to the chemistry and morphology of the coatings produced from them. Copyright © 2003 John Wiley & Sons, Ltd.     

Determination of photoelectron attenuation lengths in calcium phosphate ceramic films using XPS and RBS

Calcium phosphate (CaP) coatings are used to improve the biological performance of an implant. A technique that is often used to measure the composition of this material is XPS. When extremely thin coatings are measured, for example to study the interface between CaP and a substrate, the quantification of the XPS results is complicated by the varying attenuation lengths (ALs) of the photoelectrons at different energies. To correct for this, AL data are needed. In this work we measured these ALs by comparing XPS yields with the coating coverage (as measured by Rutherford backscattering spectrometry). We were able to determine the AL for several calcium and phosphorus peaks. Determination of the oxygen ALs was not possible owing to diffusion of oxygen into the polymeric substrates. For the peaks that are most often used for quantification of XPS yields (the Ca 2p and the P 2p peak), we found ALs of 21.8 × 10¹⁵ atoms cm^?2 and 26.8 × 10¹⁵ atoms cm^?2, respectively. Concentration profiles near the interface, growth mode and interfacial roughness appeared to have no measurable effect on the measured ALs. For the ALs, an energy dependence with an exponent of 0.55 was found. The measured ALs are best predicted by the empirical CS1 equation of Cumpson and Seah. Copyright © 2003 John Wiley & Sons, Ltd.     

Chemical communication of enzymatic ATP hydrolysis using a fluorescent chemosensor

Abstract

An anthrylpolyamine chemosensor, whose fluorescence is partially quenced upon electrostatic complexation to ATP, can be used to monitor the action of an enzyme (apyrase) that hydrolyses ATP to AMP and inorganic phosphate.     

Generation of anti-trenbolone monoclonal antibody and establishment of an indirect competitive enzyme-linked immunosorbent assay for detection of trenbolone in animal tissues, feed and urine

Trenbolone (TRE) is a steroid used by veterinarians on livestock to increase appetite and body weight. The use of TRE has been restricted because of its harmful side effect for consumers. To effectively control TRE residue in food and food product, a rapid and convenient immunoassay was developed by preparing an anti-TRE monoclonal antibody. The immunogen and coating antigen were prepared by coupling TRE hapten with carrier proteins via 1-ethyl-3-(dimethylaminopropyl)carbodiimide hydrochloride (EDC) method. The optimized method gave an average IC₅₀ value of 0.323 ng mL⁻¹ towards TRE and an average detection limit (LOD) of 0.06 ng mL⁻¹, which is much lower than the maximum residue levels (2.0 ng g⁻¹) accepted by the Joint FAO/WHO Expert Committee on Food Additives (JECFA). The specificity of the antibody was evaluated by measuring cross-reactivity of six structurally related compounds, including 19-nortestosterone (9.7%), testosterone (0.13%), methyltestosterone (<0.01%), methandrostenolone (<0.01%), (+)-dehydroisoandrosterone (<0.001%) and β-estradiol (<0.001%). The recovery rates of the test in detection of TRE-fortified animal tissue, urine and animal feed samples were in the range of 81.3-89.4%, while the intra- and inter-assay coefficients of variation were less than 12.0%.     

CePO_4/Ce-ZrO_2可加工陶瓷性能与断裂机制研究

以Ce ZrO2为基体,通过复合不同加入量的第二相CePO4颗粒,研究了陶瓷材料力学性能的变化,并借助加载能谱仪(EDS)的扫描电子显微镜(SEM)对材料弯曲断口及压痕裂纹扩展方式进行分析。当CePO4加入量为25%时,虽然材料力学性能有一定下降,但已经能用WC刀具进行加工。材料的弯曲断口显示,CePO4在两相体系中的断裂呈层片状形式;加入CePO4后,由于两相之间弱结合界面的存在,压痕裂纹扩展形式发生明显变化,由连续扩展机制过渡为不连续扩展。由这两种机制形成的材料断裂过程是阶段性的,在实际中可以用作材料最终破坏前的预报。     

Formation of MoS2 inorganic fullerenes (IFs) by the reaction of MoO3 nanobelts and S

The reaction of MoO3 and S at temperatures higher than 300 degrees C in an argon atmosphere provides a convenient and effective method for the synthesis of MoS2 nanocrystalline substances. MoS2 nanotubes and fullerene-like nanoparticles have been obtained by the reaction at 850 degrees C under well-controlled conditions. The influences of reaction temperature and duration were carefully investigated in this paper. All of the nanostructures were characterized by Xray powder diffraction (XRD), transmission electron microscopy (TEM), and high-resolution transmission electron microscopy (HRTEM). A stepwise reaction model and rolling mechanism were proposed based on the experimental results.