海螵蛸入药部分和废弃部分8种无机元素分析

为合理开发利用海螵蛸 ,用原子吸收分光光度法测定了海螵蛸中入药部分和废弃部分中8种人体必需无机元素含量。结果表明 ,入药部分和废弃部分中钙含量丰富 ,分别达到 742 1 3× 1 0 - 3和 65 9 76× 1 0 - 3。入药部分铜、铁含量较废弃部分高 ,分别为 9 41× 1 0 - 6 、 91 86× 1 0 - 6 和2 3 5× 1 0 - 6 、 2 5 7× 1 0 - 6 。废弃部分含锌丰富 ,为 3 5 3 62× 1 0 - 6 ,数倍于入药部分 64 65× 1 0 - 6 。可见海螵蛸入药部分和废弃部分均具有良好的开发前景     

Spatially Confined Tungstate Ion Polymerization in Microcapsules

A new approach for performing the WO₄²⁻ polymerization reaction exclusively inside polyelectrolyte capsules of a micron scale size is demonstrated. This approach is based upon a pH gradient across the capsule shell (2.5 inside the capsule volume and 6.5 outside the capsule) caused by encapsulated poly(styrene sulfonate) molecules. During the first stage of the reaction, different polytungstate anions were synthesized. Crystalline WO₃ nanoparticles were formed inside the capsule as the final polymerization product.

The tungstate ion polymerization confined within a micron‐sized polyelectrolyte capsule described herein.     

CePO_4/Ce-ZrO_2可加工陶瓷性能与断裂机制研究

以Ce ZrO2为基体,通过复合不同加入量的第二相CePO4颗粒,研究了陶瓷材料力学性能的变化,并借助加载能谱仪(EDS)的扫描电子显微镜(SEM)对材料弯曲断口及压痕裂纹扩展方式进行分析。当CePO4加入量为25%时,虽然材料力学性能有一定下降,但已经能用WC刀具进行加工。材料的弯曲断口显示,CePO4在两相体系中的断裂呈层片状形式;加入CePO4后,由于两相之间弱结合界面的存在,压痕裂纹扩展形式发生明显变化,由连续扩展机制过渡为不连续扩展。由这两种机制形成的材料断裂过程是阶段性的,在实际中可以用作材料最终破坏前的预报。     

Formation of MoS2 inorganic fullerenes (IFs) by the reaction of MoO3 nanobelts and S

The reaction of MoO3 and S at temperatures higher than 300 degrees C in an argon atmosphere provides a convenient and effective method for the synthesis of MoS2 nanocrystalline substances. MoS2 nanotubes and fullerene-like nanoparticles have been obtained by the reaction at 850 degrees C under well-controlled conditions. The influences of reaction temperature and duration were carefully investigated in this paper. All of the nanostructures were characterized by Xray powder diffraction (XRD), transmission electron microscopy (TEM), and high-resolution transmission electron microscopy (HRTEM). A stepwise reaction model and rolling mechanism were proposed based on the experimental results.     

Tetra‐ammonium Zinc Phthalocyanine to Construct a Graded 2D–3D Perovskite Interface for Efficient and Stable Solar Cells

The crystallographic defects inevitably incur during the solution processed organic‐inorganic hybrid perovskite film, especially at surface and the grain boundaries (GBs) of perovskite film, which can further result in the reduced cell performance and stability of perovskite solar cells (PSCs). Here, a simple defect passivation method was employed by treating perovskite precursor film with a hydrophobic tetra‐ammonium zinc phthalocyanine (ZnPc). The results demonstrated that a 2D‐3D graded perovskite interface with a capping layer of 2D (ZnPc)_0.5MA_n ? 1Pb_nI_3n + 1 perovskite together with 3D MAPbI₃ perovskite was successfully constructed on the top of 3D perovskite layer. This situation realized the efficient GBs passivation, thus reducing the defects in GBs. As expected, the corresponding PSCs with modified perovskite revealed an improved cell performance. The best efficiency reached 19.6%. Especially, the significantly enhanced long‐term stability of the responding PSCs against humidity and heating was remarkably achieved. Such a strategy in this work affords an efficient method to improve the stability of PSCs and thus probably brings the PSCs closer to practical commercialization.     

Mesostructure organic‐inorganic hybrid ionic liquids based on heteropoly acids: Effect of linkage on the molecular structure and catalytic activity

The new inorganic–organic hybrids based on SO₃H‐functionalized ionic liquids (ILs) and Keggin‐type heteropoly acids (H₃PW₁₂O₄₀, H₃PMo₁₂O₄₀, and H₄SiW₁₂O₄₀; HPAs) are prepared and characterized by FT‐IR, NMR, XRD, CV, SEM/EDX, ICP‐OES, BJH and UV. Different molecular structures according to the different inorganic part were also proved. Potentiometric titration showed a good relationship between catalytic activity and acidity of the catalysts. Electrochemical aspects showed electron transfer ability of the compounds. For understanding catalytic activities of the HPA‐IL hybrids in N‐formylation reaction, effect of catalyst composition, substrate, and reaction conditions were studied. The best SO₃H‐functionalized ionic liquid catalyst was readily recovered and reused for four runs. Easy preparation of the catalyst, simple and easy work‐up, mild reaction conditions, low cost, excellent yields and short reaction times are the key features of this work.     

蛭石对高钠高钙准东煤结渣特性影响研究

采用一维沉降炉,辅以灰熔点仪的实验方法,将蛭石与高钠高钙准东煤掺混燃烧,研究其对高钠高钙准东煤结渣特性的影响。结果表明,随着蛭石掺烧量的提高,灰熔点温度呈现先降低后升高的趋势,当掺烧量为6%时灰熔点温度最低;蛭石掺烧量越高,高钠高钙准东煤结渣情况改善越明显,当掺烧量达到4%时,渣样变得疏松多孔,质地变脆,渣样与沉积探针之间的黏附性较弱,极易通过吹灰除去,建议蛭石掺烧量为4%;煤灰中原始矿物质以石英、钙铝黄长石或钙黄长石以及辉石类的低熔点矿物质为主,掺烧蛭石后,含钠的绿辉石矿物质被转化为韭闪石,含铁的斜辉石、赤铁矿等矿物质被转化为铁橄榄石,渣样中的矿物质均以高熔点的镁橄榄石为主;蛭石具有固钠的作用,取样温度越低,蛭石掺混量越高,其固钠效果越明显。     

掺盐MEBA-co-KH570共聚物的湿敏性能

采用甲基丙烯酸二甲氨基乙酯的溴代丁烷季铵盐和硅烷偶联剂KH570的共聚物作为感湿聚合物,并向该聚合物中掺杂LiCl、CaCl2、FeCl33种不同的盐类,制备了高分子电阻型湿敏元件,系统研究了聚合物浓度、无机盐的种类和浓度对元件湿敏性能的影响。结果表明,在33%～95%RH湿度范围内,元件显示出较高的灵敏度(b为-0.043 8～-0.038 8)和较好的线性(R为-0.994 8～-0.981 6),且阻抗随聚合物浓度的增加而下降,但响应变慢;掺杂LiCl和CaCl2可使元件阻抗变小,掺杂FeCl3却使元件阻抗增大;在1×10-2mol/L的最佳LiCl掺杂浓度下,元件具有最好的灵敏度(b=-0.044 6)和最短的脱湿时间(20 s)。     

含黄酮的三价铁配合物合成及其药理性质(英文)

3,3,4,7-四羟基黄酮与1,3-二环己基碳二亚胺在4-二甲胺吡啶存在下反应,得到2,2-双(3,3,4,7-四羟基黄酮)1,3-二环己基碳二亚胺。三价金属离子与上述合成得到的配体螯合,对此四面体结构的双核Fe(Ⅲ)配合物的血液学及病理学数据进行了讨论,同时研究了合成的配体作为螯合剂清除鼠肝胰组织中超载的铁的能力。结果表明作为口服药其作为双齿配体的螯合能力与市售用于治疗地中海贫血的药物"去铁敏"相近。