无机添加剂对硝酸铵拒爆性的影响研究

考察了无机添加剂对农用硝酸铵拒爆性的影响。结果表明，当硝酸铵中添加3%的无机改性剂GXJ 1和10%的无机改性剂GXJ 2后，其拒爆性能明显增强；改性后的硝酸铵按照工业炸药配方配制成铵油炸药，不能被8号雷管起爆。而且改性后的硝酸铵颗粒强度高，不易粉化、结块和吸潮，具有优良的肥料品质。经济效益分析也表明，改性硝酸铵具有广阔的市场应用前景。通过X射线衍射分析、扫描电子显微镜分析等对改性硝酸铵进行了表征，并对拒爆机理进行了初步探讨。     

Silica-supported Copper（Ⅱ） Catalyzed Coupling of Arylboronic Acids with Imidazoles

Immobilized copper（Ⅱ） in organic-inorganic hybrid materials catalyzed Ar-N coupling of arylboronic acids with imidazoles has been developed. Arylboronic acids reacted with imidazoles smoothly in the presence of a 3-（2-aminoethylamino）propyl functionalized silica gel immobilized copper（Ⅱ） catalyst （10 mol%） in methanol without any additives and bases. The reactions generated the corresponding cross-coupling products in good yields. Furthermore, silica-supported copper can be recovered and recycled by a simple filtration procedure and used for five consecutive trials without decreases in activity.     

茂基稀土胺化物与异氰酸正己酯的反应-{(MeC5H4)2Yb[OC(NPh2)N(n-hexyl)]}2的合成及表征

茂基稀土胺化物(MeCp)2YbNPh2(THF)与异氰酸正己酯(n-HexylNCO)按11摩尔比反应, 分离出产物{(MeC5H4)2Yb[OC(NPh2)N(n-hexyl)]}2. 产物经元素分析和核磁共振表征, 并测定了其晶体结构. 配合物属三斜晶系, R-3空间群, 晶胞参数为a=2.9533(11) nm, b=2.9533(11) nm, c=1.5873(6) nm, V=11.9896(80) nm3, Z=9, Dc=1.562 mg·m-3, μ=3.536 mm-1 (Mo Kα), F(000)=5670, R=0.034, Rw=0.064. 该化合物具有二个对称氧桥的双分子结构, 并存在着由氮原子向中心金属镱分子内配位而形成的三环骨架, 中心金属镱的配位数是九, 整个分子呈中心对称.     

碳酸盐前驱物制备Y2O3超细粉及透明陶瓷

以Y(NO3)3和NH4HCO3为原料,通过向Y(NO3)3溶液中滴加NH4HCO3的方式制备了化学组成为Y2(CO3)3·2H2O的先驱沉淀物。研究了先驱沉淀物煅烧过程中的物相变化。先驱沉淀物1100℃煅烧4h后得到了平均粒径为60nm的无团聚Y2O3超细粉体。所得粉体不添加任何添加剂,在1700℃下真空烧结4h得到了透明Y2O3陶瓷。     

壳寡糖与镧、铈配合物的合成、表征及应用

合成了壳寡糖，镧和壳寡糖，铈配合物，用红外光谱和紫外光谱进行了表征，并证实了氮，金属(N-M)键的形成，元素分析证实配合物中各元素C：H：N：La或Ce的原子个数比分别接近于24：44：4：1，即相当于配位数为4。壳寡糖一镧和壳寡糖一铈较未配位的镧或铈具有更强的催化氧化能力。配合物除去废液中磷[(PO)^3-4]的效果比未配位的镧和铈提高10％。配合物可提高蔬菜、水稻种子的发芽率，促进作物的营养生长，提高水稻产量3，3％，提高黄瓜产量12％～15％，对十字花科蔬菜的病毒有一定的抑制作用。     

Imide-siloxane block copolymer/silica hybrid membranes: preparation, characterization and gas separation properties

Imide-siloxane block copolymer/silica hybrid membranes with covalent bonds were prepared via sol–gel reaction. The structural informations of these hybrid membranes were obtained by using Fourier transform-infrared spectrometry (FT-IR), ²⁹Si nuclear magnetic resonance (²⁹Si NMR), XPS and thermogravimetric analysis (TGA). The gas separation properties of the hybrid membranes were also investigated in terms of organosiloxane (PDMS) or silica content at various temperatures. In the hybrids, the addition of PDMS phase increased the permeabilities of gases such as He, CO₂, O₂, and N₂, indicating that the gas transport occurred mainly through rubbery organic matrix. Meanwhile, the PDMS phase contributed the decreased gas selectivities to nitrogen but the reduction in selectivities was very small in comparison with other siloxane containing polymeric membranes. This might be due to the restriction of chain mobility by the existence of inorganic component such as silica network in the hybrids. Additionally, the increase of silica content in these hybrid membranes considerably retarded the falling-off of gas selectivity at elevated temperature. The increase of silica content in hybrid membranes resulted in well-formed silica networks and hence these inorganic components restricted the plasticization of organic matrix by the thermal segmental motion of organic components, leading to preventing the large decrease of the gas selectivity.     

NMR and potentiometric determination of the high pK values and protonation sequence of dipyridino-hexaaza-28-crown-8 and its interactions with selenate,sulfate and nitrate ions in aqueous solution

The aqueous protonation and anion-binding SeO ₂ ^–/4 SO _2– ⁴ , and NO _– ³ ) constants of the macrocyclic polyamine ligand, dipyridino-hexaaza-28-crown-8(L), were measured in 0.1M KCl using a potentiometric titration technique. The protonation sequence of the aza groups of L was studied in D₂O from the chemical shifts of the nonlabile protons so as to find the charge distribution geometry as a function of pD. The study indicates that in 0.1M KC1 fully protonated L forms stable l: 1 complexes with SeO _2– ⁴ (logK=3.68) and SO _2– ⁴ (logK=3.55), but not with NO _– ³ (logK < l.5). All of the amine pK values were above 6.3, thus allowing the use of the protonated form of this ligand over a wide pH range.     

无机纳米管材料合成进展

无机材料的微观结构决定了材料的许多特性,如传输行为、催化活性、分离效率、粘附、储存和释放动力学。具有管状结构纳米尺度的材料由于其特殊的结构及由此带来的特殊性能正成为一个令人兴奋的化学研究领域。文章综述了近年来无机纳米管材料的合成途径和进展。     

CePO_4/Ce-ZrO_2可加工陶瓷性能与断裂机制研究

以Ce ZrO2为基体,通过复合不同加入量的第二相CePO4颗粒,研究了陶瓷材料力学性能的变化,并借助加载能谱仪(EDS)的扫描电子显微镜(SEM)对材料弯曲断口及压痕裂纹扩展方式进行分析。当CePO4加入量为25%时,虽然材料力学性能有一定下降,但已经能用WC刀具进行加工。材料的弯曲断口显示,CePO4在两相体系中的断裂呈层片状形式;加入CePO4后,由于两相之间弱结合界面的存在,压痕裂纹扩展形式发生明显变化,由连续扩展机制过渡为不连续扩展。由这两种机制形成的材料断裂过程是阶段性的,在实际中可以用作材料最终破坏前的预报。     

Y2O3, La2O3, Sm2O3对氧化铝瓷烧结及力学性能的影响

研究了3种稀土氧化物对氧化铝陶瓷烧结性能和力学性能的影响.结果表明 含Y2O3,La2O3,Sm2O3的添加剂促进了氧化铝瓷的烧结,提高了氧化铝瓷的力学性能.Y2O3和Sm2O3掺量为0.50%,La2O3掺量为0.75%时氧化铝瓷在1600或1620 ℃保温2 h烧结,相对密度达98.9%以上,强度超过439 MPa,断裂韧性达5.15 MPa·m1/2以上.微观结构分析表明,Y2O3,La2O3,Sm2O3抑止氧化铝晶粒生长,细化晶粒,使晶粒尺寸较均匀形成致密化结构.