Studies on the syntheses of polymetalloxanes and their properties as a precursor for amorphous oxide. IV. Properties of SiO2–TiO2 oxide fibers from polytitanosiloxane

From polytitanosiloxanes (PTS), SiO₂–TiO₂ oxide fibers with fairly good tensile strength were prepared, and their mechanical and thermal properties were investigated. The precursor fibers PTS-0.5 and PTS-1.0 were obtained by dry spinning of a highly viscous PTS solution which were formed as the reaction mixture of silicic acid (SA) with bis(2,4-pentanedionato)titanium diisopropoxide (PTP) in the molar ratios (SA/PTP) of 0.5 and 1.0. The precursor fibers PTS-0.5 were too brittle to measure their tensile strength, whereas PTS-1.0 and the heat-treated fibers were found to have tensile strength of 130 (precursor), 540 (500°C), and 450 (900°C) MPa, respectively. Heat-treatment of the fibers PTS-1.0 at above 1000°C forms anatase and rutile of titanium dioxide. The crystallization is resulted from the unreacted PTP which is not incorporated into the polymer network.     

基于线上线下结合的无机定性分析实验教学

针对在实验室开设定性分析实验受到的制约,设计并开设了"无机化合物的性质与鉴定"虚拟实验,以作为常规无机定性分析实验的重要补充和扩展。虚拟实验和传统实验一并开设,构成线上线下结合的教学模式,完善知识体系,全面培养学生的无机定性分析能力。     

Synthesis and Characterization of a One- dimensional Molybdenum Oxide （H2enMe）[Mo3O10]

A hybrid organic-inorganic material (H2enMe)[Mo3O10] (C3H12Mo3N2O10, Mr = 523.97) has been synthesized under hydrothermal conditions and its crystal structure was determined by X-ray diffraction. It crystallizes in the orthorhombic system, space group Pnma with a = 12.430(2), b = 7.6089(12), c = 11.9553(19) , V = 1130.7(3) 3, Dc = 3.078 g/cm3, Z = 4, μ(MoKa) = 3.328 mm1, F(000) = 1000, the final R = 0.0256 and wR = 0.0716 for 1314 observed reflections with I > 2σ(I). A total of 11780 reflections were measured and 1325 were unique (Rint = 0.0244). It consists of infinite one-dimensional edge-sharing MoO6 octahedral chains with [Mo3O10]2 moieties. The protonated diaminopropane cations are located between the chains and linked to the oxygen atoms of the inorganic skeletal backbones by hydrogen bonds. It is indicated that the as-synthesized compound displays photochromic property in the solid state.     

金属硫族化合物CsSb2(Se2)0.5Se3的溶剂热合成及其晶体结构分析

以有机溶剂热生长技术(Solvothermal Technique)在180 ℃乙二胺(en)溶液中以SbCl₃与碱金属硒化物Cs₂Se和Se在密闭容器中反应7 d,制备出新的金属硫族化合物CsSb₂(Se₂)_0.5Se₃。以单晶X射线衍射技术测得晶体结构属三斜晶系,空间群为P1,晶胞参数：a=0.653 0(2) nm,b=0.707 1(3) nm,c=0.979 9(4) nm,α=80.37(3)°,β=86.28(3)°,γ=74.61(3)°,V=0.430 0(3) nm³,Z=2。     

La2O3对氧化铝透明陶瓷显微结构和透光性能的影响

采用传统无压烧结工艺在氢气氛下制备Al2O3透明陶瓷。实验结果表明：MgO和La2O3复合添加时，随着La2O3掺杂量的增加体积密度总体上保持上升的趋势。随着保温时间的延长，陶瓷的致密化程度增大，残余气孔逐步排出，晶粒进一步长大。采用La2O3和MgO复合添加比单独掺入MgO陶瓷样品透过率更高，掺杂效果更好。在烧结温度为1750℃，保温时问为1h条件下，在波艮为300～800nm测试范围内，陶瓷样品的全透过率大于82％，最大值为86％。     

无机膜反应器在丙烷选择氧化反应中的应用

将无机膜反应器用于丙烷部分氧化制丙烯醛的反应中,考察了不同膜操作方式和反应条件的影响。实验结果表明,采用ＰＰＯＲ膜操作方式,即丙烷从渗透侧通入,氧气从反应侧通入,丙烷可获得较大的自由活化空间,避免与气相氧反应,因此提高了部分氧化反应的选择性。采用分别进样的膜反应,丙烯醛产率可比混合进样的固定床反应高出达３倍。     

Soft‐Chemical Exfoliation Route to Layered Cobalt Oxide Monolayers and Its Application for Film Deposition and Nanoparticle Synthesis

A colloidal suspension of exfoliated, layered cobalt oxide nanosheets has been synthesized through the intercalation of quaternary tetramethylammonium ions into protonated lithium cobalt oxide. According to atomic force microscopy, exfoliated nanosheets of layered cobalt oxide show a plateau‐like height profile with nanometer‐level height, underscoring the formation of unilamellar 2D nanosheets. The exfoliation of layered cobalt oxide was cross‐confirmed by X‐ray diffraction, UV/Vis spectroscopy, and transmission electron microscopy. The maintenance of the hexagonal in‐plane structure of the cobalt oxide lattice after the exfoliation process was evidenced by selected‐area electron diffraction and Co K‐edge X‐ray absorption near‐edge structure analysis. The zeta‐potential measurements clearly demonstrated the negative surface charge of cobalt oxide nanosheets. Adopting the nanosheets of layered cobalt oxide as a precursor, we were able to prepare the monodisperse CoO nanocrystals with a particle size of ≈10 nm as well as the heterolayered film composed of cobalt oxide monolayer and polycation.     

无机纳米稀土发光材料的制备方法*

无机纳米稀土发光材料作为一种重要的发光材料,由于具有独特的光、电和化学性质,使其在高性能磁体、发光器件、显示、生物标记、光学成像和光学治疗等方面得到了广泛的应用。稀土发光材料的这些性质与材料的尺寸和形状密切相关,近年来研究者已经利用多种合成方法制备了不同形状的纳米稀土发光材料,包括纳米线、纳米棒、纳米管、纳米纤维和纳米片等。本文综述了无机纳米稀土发光材料的几种常用的制备方法,包括水热/溶剂热法、有机/无机前驱体热分解法和超声辅助合成法等,评述了这些方法的优缺点,并结合课题组在无机纳米稀土发光材料制备方面的工作,对无机纳米稀土发光材料制备方法的发展进行了展望。