A Deadly Organometallic Luminescent Probe: Anticancer Activity of a ReI Bisquinoline Complex

The photophysical properties of [Re(CO)₃(L ‐N₃)]Br (L ‐N₃=2‐azido‐N,N‐bis[(quinolin‐2‐yl)methyl]ethanamine), which could not be localized in cancer cells by fluorescence microscopy, have been revisited in order to evaluate its use as a luminescent probe in a biological environment. The Re^I complex displays concentration‐dependent residual fluorescence besides the expected phosphorescence, and the nature of the emitting excited states have been evaluated by DFT and time‐dependent (TD) DFT methods. The results show that fluorescence occurs from a ¹LC/MLCT state, whereas phosphorescence mainly stems from a ³LC state, in contrast to previous assignments. We found that our luminescent probe, [Re(CO)₃(L ‐N₃)]Br, exhibits an interesting cytotoxic activity in the low micromolar range in various cancer cell lines. Several biochemical assays were performed to unveil the cytotoxic mechanism of the organometallic Re^I bisquinoline complex. [Re(CO)₃(L ‐N₃)]Br was found to be stable in human plasma indicating that [Re(CO)₃(L ‐N₃)]Br itself and not a decomposition product is responsible for the observed cytotoxicity. Addition of [Re(CO)₃(L ‐N₃)]Br to MCF‐7 breast cancer cells grown on a biosensor chip micro‐bioreactor immediately led to reduced cellular respiration and increased glycolysis, indicating a large shift in cellular metabolism and inhibition of mitochondrial activity. Further analysis of respiration of isolated mitochondria clearly showed that mitochondrial respiratory activity was a direct target of [Re(CO)₃(L ‐N₃)]Br and involved two modes of action, namely increased respiration at lower concentrations, potentially through increased proton transport through the inner mitochondrial membrane, and efficient blocking of respiration at higher concentrations. Thus, we believe that the direct targeting of mitochondria in cells by [Re(CO)₃(L ‐N₃)]Br is responsible for the anticancer activity.     

Mesoporous Silica Particles as Topologically Crosslinking Fillers for Poly(N‐isopropylacrylamide) Hydrogels

Here it is demonstrated that mesoporous silicas (MPSs) can be used as effective “topological crosslinkers” for poly(N‐isopropylacrylamide) (PNIPA) hydrogels to improve the mechanical property. Three‐dimensional bicontinuous mesporous silica is found to effectively reinforce the PNIPA hydrogels, as compared to nonporous silica and two‐dimensional hexagonally ordered mesoporous silica.     

On the Rotational Intergrowth of Hierarchical FAU/EMT Zeolites

A structural study of a hierarchical zeolite X, which is similar to the one first synthesized by Inayat et al., 12 was performed using transmission electron microscopy imaging and diffraction. Evidence is provided, by comparison to simulations, that this material is an intergrowth of FAU and EMT and a conceptual model is presented for the growth of the FAU material with a small fraction of EMT in an atypical morphology of assembled sheets with well‐defined intersection angles.     

Multisite Organic–Inorganic Hybrid Catalysts for the Direct Sustainable Synthesis of GABAergic Drugs

Multisite organic–inorganic hybrid catalysts have been prepared and applied in a new general, practical, and sustainable synthetic procedure toward industrially relevant GABA derivatives. The domino sequence is composed of seven chemical transformations which are performed in two one‐pot reactions. The method produces both enantiomeric forms of the product in high enantiopurity as well as the racemate in good yields after a single column purification step. This protocol highlights major process intensification, catalyst recyclability, and low waste generation.     

Qualitative spectroscopic characterization of the matrix–silane coupling agent interface across metal fibre reinforced ion exchange resin composite membranes

The characterization of novel metal reinforced electro-dialysis ion exchange membranes, for water desalination, by attenuated total reflectance Fourier transform infrared spectroscopy mapping is presented in this paper. The surface of the porous stainless steel fibre meshes was treated in order to enhance the amount of surface oxide groups and increase the material hydrophilicity. Then, the metal membranes were functionalized through a sol–gel reaction with silane coupling agents to enhance the affinity with the ion exchange resins and avoid premature metal oxidation due to redox reactions at the metal–polymer interface. Polished cross sections of the composite membranes embedded into an epoxy resin revealed interfaces between metallic frameworks and the silane layer at the interface with the ion exchange material. The morphology of the metal–polymer interface was investigated with scanning electron microscopy and Fourier transform infrared micro-spectroscopy. Fourier transform infrared mapping of the interfaces was performed using the attenuated total reflectance mode on the polished cross-sections at the Australian Synchrotron. The nature of the interface between the metal framework and the ion exchange resin was shown to be homogeneous and the coating thickness was found to be around 1 μm determined by Fourier transform infrared micro-spectroscopy mapping. The impact of the coating on the properties of the membranes and their potential for water desalination by electro-dialysis are also discussed.     

Sulfur-Modified Oxygen Vacancies in Iron–Cobalt Oxide Nanosheets: Enabling Extremely High Activity of the Oxygen Evolution Reaction to Achieve the Industrial Water Splitting Benchmark

The oxygen vacancies of defective iron–cobalt oxide (FeCoO_x-Vo) nanosheets are modified by the homogeneously distributed sulfur (S) atoms. S atoms can not only effectively stabilize oxygen vacancies (Vo), but also form the Co−S coordination with Co active site in the Vo, which can modulate the electronic structure of the active site, enabling FeCoO_x-Vo-S to exhibit much superior OER activity. FeCoO_x-Vo-S exhibits a mass activity of 2440.0 A g⁻¹ at 1.5 V vs. RHE in 1.0 m KOH, 25.4 times higher than that of RuO₂. The Tafel slope is as low as 21.0 mV dec⁻¹, indicative of its excellent charge transfer rate. When FeCoO_x-Vo-S (anode catalyst) is paired with the defective CoP₃/Ni₂P (cathode catalyst) for overall water splitting, current densities of as high as 249.0 mA cm⁻² and 406.0 mA cm⁻² at a cell voltage of 2.0 V and 2.3 V, respectively, can be achieved.     

Rational Design of Cyclometalated Iridium(III) Complexes for Three-Photon Phosphorescence Bioimaging

Compared to 2PE (two-photon excitation) microscopy, 3PE microscopy has superior spatial resolution, deeper tissue penetration, and less defocused interference. The design of suitable agents with a large Stokes shift, good three-photon absorption (3PA), subcellular targeting, and fluorescence lifetime imaging (FLIM) properties, is challenging. Now, two Ir^III complexes (3PAIr1 and 3PAIr2) were developed as efficient three-photon phosphorescence (3PP) agents. Calculations reveal that the introduction of a new group to the molecular scaffold confers a quadruple promotion in three-photon transition probability. Confocal and lifetime imaging of mitochondria using Ir^III complexes as 3PP agents is shown. The complexes exhibit low working concentration (50 nm ), fast uptake (5 min), and low threshold for three-photon excitation power (0.5 mW at 980 nm). The impressive tissue penetration depth (ca. 450 μm) allowed the 3D imaging and reconstruction of brain vasculature from a living specimen.     

Molten-Salt-Assisted Synthesis of Bismuth Nanosheets for Long-term Continuous Electrocatalytic Conversion of CO2 to Formate

Two-dimensional (2D) monometallic pnictogens (antimony or Sb, and bismuth or Bi) nanosheets demonstrate potential in a variety of fields, including quantum devices, catalysis, biomedicine and energy, because of their unique physical, chemical, electronic and optical properties. However, the development of general and high-efficiency preparative routes toward high-quality pnictogen nanosheets is challenging. A general method involving a molten-salt-assisted aluminothermic reduction process is reported for the synthesis of Sb and Bi nanosheets in high yields (>90 %). Electrocatalytic CO₂ reduction was investigated on the Bi nanosheets, and high catalytic selectively to formate was demonstrated with a considerable current density at a low overpotential and an impressive stability. Bi nanosheets continuously convert CO₂ into formate in a flow cell operating for one month, with a yield rate of 787.5 mmol cm⁻² h⁻¹. Theoretical results suggest that the edge sites of Bi are far more active than the terrace sites.     

Facile Preparation of WO3−x Dots with Remarkably Low Toxicity and Uncompromised Activity as Co-reactants for Clinical Diagnosis by Electrochemiluminescence

The exceptional nature of WO_3−x dots has inspired widespread interest, but it is still a significant challenge to synthesize high-quality WO_3−x dots without using unstable reactants, expensive equipment, and complex synthetic processes. Herein, the synthesis of ligand-free WO_3−x dots is reported that are highly dispersible and rich in oxygen vacancies by a simple but straightforward exfoliation of bulk WS₂ and a mild follow-up chemical conversion. Surprisingly, the WO_3−x dots emerged as co-reactants for the electrochemiluminescence (ECL) of Ru(bpy)₃²⁺ with a comparable ECL efficiency to the well-known Ru(bpy)₃²⁺/tripropylamine (TPrA) system. Moreover, compared to TPrA, whose toxicity remains a critical issue of concern, the WO_3−x dots were ca. 300-fold less toxic. The potency of WO_3−x dots was further explored in the detection of circulating tumor cells (CTCs) with the most competitive limit of detection so far.     

碱金属无机酸盐催化的硫醇的β-羟乙基化反应

在常压、无溶剂、120℃条件下,考察了14种碱金属无机酸盐(MA,M=Li^+,Na^+,K^+)催化正辛硫醇与碳酸乙烯酯的S-羟乙基化反应性能。普遍的规律是:在阴离子A相同的情况下,钾盐的催化活性高于相应的钠盐,而锂盐无催化活性。在各种无机酸钾盐中,如果共轭酸酸性越强,则相应的钾盐的催化活性越低。为探究钾盐催化剂活化-SH的机理的普适性,以K_3PO_4为催化剂,考察了在不同反应温度下,6种不同结构的硫醇与碳酸乙烯酯的β-羟乙基化反应催化活性,得出规律是硫醇的酸性越强,其反应活性越高,S-H键越容易解离。该反应无溶剂参与,硫醇与碳酸乙烯酯的物质的量之比接近理论量,产物β-羟乙基硫醚的选择性>99%,产物中无卤素盐副产物生成,易于分离。