消旋的有机二磺酸三邻菲咯啉锌配合物(英)

Compound [Zn(phen)₃][BDA] (1) (BDA=6,6′-dibromo-2,2′-dimethoxy-1,1′-binaphthylene-4,4′-disulfonate, phen= 1,10-phenanthroline) composes of the anion part (racemic-(R,S)-6,6′-dibromo-2,2′-dimethoxy-1,1′-binaphthylene-4,4′-disulfonate ) and the cation part which consists of a racemic octahedrally coordinated zinc center defined six nitrogen atoms from three phen rings to form an inorganic chirality that can be resolution by chiral organic ligand, the 3D framework was formed through the strong H-bonding interaction between sulfonate and water. CCDC: 277924.     

热处理及与KOH共炭化对深度脱除煤中无机矿物质的促进作用

研究了煤经热处理（炭化）以及煤与ＫＯＨ共炭化对酸洗脱灰的影响。结果表明，煤经炭化再用盐酸洗涤，可以在缓和的条件下大幅度提高酸洗脱灰率；煤与ＫＯＨ共炭化后再酸洗，不仅对煤中的粘土、黄铁矿等无机矿物质有很好的效果，还特别适于脱除在一般情况下都难以除去的石英矿物。     

Electrodeposition of mercury film on electrodes modified with clay minerals

A new type of carbon paste electrode modified with clay mineral and covered with a mercury film is presented in this work. Electrodeposition of the mercury film was performed on the carbon paste electrode modified with montmorillonite. The mercury film was deposited by both electrodeposition in situ and a preliminary electrodeposition. The pre-deposited film of mercury showed to be suitable for anodic stripping voltammetry. An open-circuit sorption of Cd, Pb, and Cu with subsequent anodic stripping voltammetry exhibited higher current responses of metals. Besides the enhanced sensitivity superior separation of the current responses during a simultaneous stripping of metals is expected to be achieved by means of the newly prepared electrode. Presented at the 57th Congress of Chemical Societies, Tatranské Matliare, 4–8 September 2005.     

Robust interface on ENR-50/TiO2 nanohybrid material based sol-gel technique: Insights into synthesis,characterization and applications in optical

In this work, the sol–gel technique was used to prepare a new organic–inorganic hybrid from Epoxidized Natural Rubber (ENR-50) and Titanium dioxide (TiO₂) by blending different content of titania precursors (10, 30, and 50 wt%) with an ENR-50 matrix. A wide range of analyses was conducted to understand the nature of this hybrid and also to evaluate its potential uses in applications required high refractive index such as micro optical and optoelectronic devices. Results indicated that the ring-opening reaction of epoxide groups in ENR-50 increased with the increase of titania content in the hybrid resulting a strong bonding between titania and ENR-50 through TiOC bond, which was observed in FTIR spectrum at 1027–1028 cm⁻¹. It is also observed a slight decrease in the intensity of the amorphous peak along with a new crystalline peak appeared at 2θ = 23 and 27° due to the crystalline nature of titania. The hybrids showed three thermal degradation steps in the range of temperature 76 to 769 °C due to the existence of the Ti moieties with the mixture of polymer chains, which in turn shifted the T_g at 24.3, 26.9 and 28.1 °C for the hybrid at 10, 30, and 50 wt% TiO₂ compared to the T_g of ENR-50 at −18.4 °C respectively. The morphology of the ENR-50 showed clear changes during of the synthesis of ENR-50/TiO₂ hybrids, these changes were proven by SEM, TEM, and AFM analyses. Uv–Vis results showed that the higher wavelength peak at 293 nm has shifted to 296, 298 and 300 nm for the hybrid at 10, 30, and 50 wt% TiO₂ respectively due to the strong interaction between titania precursors and ENR-50 matrix. Furthermore, the hybrids showed good optical transparency in the visible light range.     

GRECP/MRD‐CI calculations on the Hg atom and HgH molecule

Multireference single‐ and double‐excitation configuration interaction (MRD‐CI) calculations of transition energies for the Hg atom and spectroscopic constants for the HgH molecule are carried out with the generalized relativistic effective core potential (GRECP) method. A new selection criterium for the reference configurations is discussed. The calculated spectroscopic constants are compared with experimental data and results of calculations of other groups. Improvement of accuracy is mainly observed for bond lengths from the GRECP/MRD‐CI calculations (without applying the T = 0 correction) with respect to the results of other groups. Analysis of the quality of the approximations employed is carried out. © 2002 Wiley Periodicals, Inc. Int J Quantum Chem, 2002     

锂离子蓄电池正极材料LiFePO4研究进展

锂离子电池正极材料正在向着高比能量、长寿命、低成本、环境友好的方向发展,而具有橄榄石结构的LiFePO_4正极材料以其结构稳定、成本低、无污染等优点成为21世纪最理想的绿色电源,但自身也存在缺点。综述了锂离子电池正极材料LiFePO_4的研究进展。系统地阐述了LiFePO_4的晶体结构特征及性能、多种合成方法以及掺杂多种导电材料和控制晶体生长制备纳米粉体对材料性能的影响。对该材料的应用前景进行了展望,并提出了下一步可能的研究趋势。     

Selective Electrocatalytic Hydrogenation of trans-2-Allyl-6-methyl(allyl, phenyl)-1,2,3,6-tetrahydropyridines on the Nickel and Copper Cathodes

It is shown that the electrocatalytic hydrogenation (ECH) of trans-2-allyl-6-R-1,2,3,6-tetrahydropyridines (R = Me, All, Ph) on a nickel cathode (Ni_disp/Ni) in 40-% aqueous DMF in the presence of excess AcOH yields products of total hydrogenation of all double bonds—relevant trans-2-propyl-6-R₁-piperidines (R₁ = Me, Pr, Ph). Selective hydrogenation of terminal double bonds of allyl substituents in piperideines under study with the retention of the intracycle double bond may be realized on a copper cathode (Cu_ann), provided the stoichiometric ratio between AcOH and the initial substance is observed exactly. In either case, at points of maximum selectivity of ECH processes, the ratio c _AcOH/c _ini = n+ 1, where nis the number of hydrogenated bonds. The difference in the ECH mechanisms on the Cu_ann and Ni_disp/Ni cathodes is discussed. The results of hydrogenation of the trans-2-allyl-6-R-1,2,3,6-tetrahydropyridines at the Cu_ann and Ni_disp/Ni cathodes confirm the general character of regularities discovered earlier during ECH of citral.     

Rigid nanoscopic containers for highly dispersed, stable metal and bimetal nanoparticles with both size and site control

We demonstrate a novel strategy for the preparation of mesoporous silica-supported, highly dispersed, stable metal and bimetal nanoparticles with both size and site control. The supporting mesoporous silica, functionalized by polyaminoamine (PAMAM) dendrimers, is prepared by repeated Michael addition with methyl acrylates (MA) and amidation reaction with ethylenediamine (EDA), by using aminopropyl-functionalized mesoporous silica as the starting material. The encapsulation of metal nanoparticles within the dendrimer-propagated mesoporous silica is achieved by the chemical reduction of metal-salt-impregnated dendrimer-mesoporous silica by using aqueous hydrazine. The site control of the metal or bimetal nanoparticles is accomplished by the localization of inter- or intradendrimeric nanoparticles within the mesoporous silica tunnels. The size of the encapsulated nanoparticles is controlled by their confinement to the nanocavity of the dendrimer and the mesopore. For Cu and Pd, particles locate at the lining of mesoporous tunnels, and have diameters of less than 2.0 nm. For Pd/Pt, particles locate at the middle of mesoporous tunnels and have diameters in the range of 2.0-4.2 nm. The Pd and Pd/Pt nanoparticles are very stable in air, whereas the Cu nanoparticles are stable only in an inert atmosphere.     

Ring currents as probes of the aromaticity of inorganic monocycles : P5-, As5-, S2N2, S3N3-, S4N3+, S4N42+, S5N5+, S42+ and Se42+

Current-density maps were calculated by the ipsocentric CTOCD-DZ/6-311G** (CTOCD-DZ=continuous transformation of origin of current density-diamagnetic zero) approach for three sets of inorganic monocycles: S(4) (2+), Se(4) (2+), S(2)N(2), P(5) (-) and As(5) (-) with 6 pi electrons; S(3)N(3) (-), S(4)N(3) (+) and S(4)N(4) (2+) with 10 pi electrons; and S(5)N(5) (+) with 14 pi electrons. Ipsocentric orbital analysis was used to partition the currents into contributions from small groups of active electrons and to interpret the contributions in terms of symmetry- and energy-based selection rules. All nine systems were found to support diatropic pi currents, reinforced by sigma circulations in P(5) (-), As(5) (-), S(3)N(3) (-), S(4)N(3) (+), S(4)N(4) (2+) and S(5)N(5) (+), but opposed by them in S(4) (2+), Se(4) (2+) and S(2)N(2). The opposition of pi and sigma effects in the four-membered rings is compatible with height profiles of calculated NICS (nucleus-independent chemical shifts).     

Some neutral three-coordinate complexes of mercury(II) halides and pseudohalides with N-methylnicotinamide

Coordination compounds of mercury(II) chloride, bromide, cyanide and thiocyanate with N-methylnicotinamide, a potentially bidentate ligand, have been prepared. The complexesisolated have 1∶1 (metal:ligand)stoichiometry. Molecular weight measurements in molten camphor indicate that the mercury (II) chloride and bromide complexes are monomeric. Based on conductance values, molecular weight determinations and infrared spectral data, it is inferred that in the solid state in all these complexes the metal ion has a coordination number three and is bonded to the N-methylnicotinamide via its pyridine ring nitrogen, and is terminally bonded to the halogen/pseudohalogens.