CePO_4/Ce-ZrO_2可加工陶瓷性能与断裂机制研究

以Ce ZrO2为基体,通过复合不同加入量的第二相CePO4颗粒,研究了陶瓷材料力学性能的变化,并借助加载能谱仪(EDS)的扫描电子显微镜(SEM)对材料弯曲断口及压痕裂纹扩展方式进行分析。当CePO4加入量为25%时,虽然材料力学性能有一定下降,但已经能用WC刀具进行加工。材料的弯曲断口显示,CePO4在两相体系中的断裂呈层片状形式;加入CePO4后,由于两相之间弱结合界面的存在,压痕裂纹扩展形式发生明显变化,由连续扩展机制过渡为不连续扩展。由这两种机制形成的材料断裂过程是阶段性的,在实际中可以用作材料最终破坏前的预报。     

微波消解-氢化物发生原子荧光法测定塑料原料及其制品中的砷、汞

采用微波消解进行样品前处理，以硫脲为预还原剂，用氢化物发生原子荧光法测定塑料原料及其制品中的砷、汞。测定砷和汞的线性范围均为0～8μg／L，砷、汞的检出限分别为0．005、0．076μg／L，测定结果的相对标准偏差分别为4.96％～7．38％、2．94％～7．20％(n=6)，回收率分别为92．0％～103．2％、92．0％～98.0％。     

Y2O3, La2O3, Sm2O3对氧化铝瓷烧结及力学性能的影响

研究了3种稀土氧化物对氧化铝陶瓷烧结性能和力学性能的影响.结果表明 含Y2O3,La2O3,Sm2O3的添加剂促进了氧化铝瓷的烧结,提高了氧化铝瓷的力学性能.Y2O3和Sm2O3掺量为0.50%,La2O3掺量为0.75%时氧化铝瓷在1600或1620 ℃保温2 h烧结,相对密度达98.9%以上,强度超过439 MPa,断裂韧性达5.15 MPa·m1/2以上.微观结构分析表明,Y2O3,La2O3,Sm2O3抑止氧化铝晶粒生长,细化晶粒,使晶粒尺寸较均匀形成致密化结构.     

倒数示波计时电位法在合金样品测定中的应用

应用倒数示波计时电位法，在含有吸附络合物的溶液中，采用桂汞电极作为极化电极，测定了Ｃｕ＾２＋、Ｎｉ＾２＋、Ｃｄ＾２＋、Ｐｂ＾２＋等几种金属离子的检测下限，并通过沿（ｄＥ／ｄｔ）－１￣Ｅ曲线上的峰高对合金样品进行定量分析，得到满意结果。实现了示波分析由常量到微量的飞跃。     

Sm2O3掺杂CeO2纳米粉体的烧结动力学

对Sm2O3掺杂CeO2纳米粉体的烧结性能进行了研究, 得出等速烧结过程中试样的线收缩率、密度、气孔率随烧结温度的变化规律, 它们随烧结温度的变化均呈"S"型曲线关系, 利用非线性回归了等速烧结过程动力学方程. 结果表明, Sm2O3掺杂CeO2纳米粉体的烧结过程分为3个阶段, 当烧结温度低于1000 ℃时, 线收缩率与密度变化较小, 处于烧结的初期; 在1000～1400 ℃时, 随着烧结温度的升高, 线收缩率与体积密度急剧增大, 材料开始烧结并致密化; 当烧结温度高于1400 ℃时, 线收缩率与体积密度趋于一恒定值, 材料已经致密化. 由归一化速率方程可知, 在T=1225 ℃时, 材料的烧结致密化速率最大.     

Crystal Structure of Cu(hfac)2 Complexes with Organomercury Binitroxide

The organomercury biradical HgL₂ (L is deprotonated 4,4,5,5-tetramethyl-2-imidazoline-3-oxide-1-oxyl) is capable of performing the bridging function for design of multinuclear heterospin systems. This paper describes synthesis and crystal structure of HgL₂ and the first multinuclear complexes of Cu(hfac)₂ with HgL₂.     

Covalent Interactions in Mercury Oxohalides and Their Role in Crystal Structure Fragmentation

An [Hg₆O₂]-cationic (r) octahedron atomic group has been isolated in a number of mercury oxohalide structures. The octahedron is constructed from two edge-sharing oxo-centered [Hg₄O] tetrahedra. For -Hg₃O₂Cl₂, -Hg₃O₂Cl₂, Hg₂OI, [Hg₂]₃O₂Cl₂, [Hg₂]₃HgO₃Cl₂, Hg₅O₄Cl₂, and some other compounds, the geometrical parameters of their crystal structures depend on the dimensions and mutual packing of the cationic r-octahedra and the individual [Hg₄O] tetrahedra, if any.     

碳纤维汞膜微电极1.5次微分伏安法测定米托蒽醌的研究

米托蒽醌（ＭＸＴ）能吸附在碳纤维汞膜微电极表面，阴极溶出时，产生一个灵敏的１．５次微分溶出峰，其峰电流和米托葱酿的浓度在１．０×１０－５ｍｏｌ／Ｌ～１．３×１０－９ｍｏｌ／Ｌ范围内具有良好的线性关系，经３ｍｉｎ的富集，检出限可达１．０×１０－１０ｍｏｌ／Ｌ，据此建立了测定ＭＸＴ的灵敏的新方法，本文讨论了实验条件，并对血样中的ＭＸＴ进行了测定。     

Optimization of a GFAAS method for determination of total inorganic arsenic in drinking water

The new 10 μg l⁻¹ arsenic standard in drinking water has been a spur to the search for reliable routine analytical methods with a limit of detection at the μg l⁻¹ level. These methods also need to be easy to handle due to the routine analyses that are required in drinking water monitoring. Graphite furnace atomic absorption spectrometry (GFAAS) meets these requirements, but the limit of detection is generally too high except for methods using a pre-concentration or separation step. The use of a high-intensity boosted discharge hollow-cathode lamp decreases the baseline noise level and therefore allows a lower limit of detection. The temperature program, chemical matrix modifier and thermal stabilizer additives were optimized for total inorganic arsenic determination with GFAAS, without preliminary treatment. The optimal furnace program was validated with a proprietary software. The limit of detection was 0.26 μg As l⁻¹ for a sample volume of 16 μl corresponding to 4.2 pg As. This attractive technique is rapid as 20 samples can be analysed per hour. This method was validated with arsenic reference solutions. Its applicability was verified with artificial and natural groundwaters. Recoveries from 91 to 105% with relative standard deviation <5% can be easily achieved. The effect of interfering anions and cations commonly found in groundwater was studied. Only phosphates and silicates (respectively at 4 and 20 mg l⁻¹) lead to significant interferences in the determination of total inorganic arsenic at 4 μg l⁻¹.     

Cover Picture: Trimeric Perfluoro‐ortho‐phenylenemercury: A Versatile Lewis Acidic Host (Chem. Eur. J. 21/2003)

The cover picture shows how trimeric perfluoro‐ortho‐phenylene mercury (center), one of the simplest trifunctional Lewis acidic hosts, interacts with organic molecules to afford various adducts. The planarity of this trinuclear complex as well as its overall polarizability compounded with relativistic effects at mercury permits the occurrence of noncovalent interactions and accounts for the tendency of this compound to form cofacial dimers as observed in the structure of the acetone adduct (top left). With a triply coordinated acetone molecule, the structure of this adduct also substantiates the cooperative effects that arise from the proximity and accessibility of the mercury centers. The complexation of arenes, such as benzene (bottom left) and naphthalene (bottom right), also occurs and leads to the formation of binary stacks in which the arene establishes multiple linkages with the mercury centers of the trifunctional Lewis acids. In addition to displaying unusual coordination environment, the arene units present in those stacks exhibit remarkable phosphorescent properties. For more details, see the paper by F. P. Gabbaï, R. E. Taylor, and M. R. Haneline on p. 5188 ff.