A novel nano‐size lanthanum metal–organic framework based on 5‐amino‐isophthalic acid and phenylenediamine: Photoluminescence study and sensing applications

In this paper, a novel lanthanum metal–organic framework La‐MOF was prepared via hydrothermal and reflux methods. The La‐MOF was achieved through the reaction of a 5‐amino‐isophthalic acid with 1, 2‐phenylenediamine and lanthanum chloride. The prepared La‐MOF structure was confirmed by XRD, mass spectrometry, IR, UV–Vis and elemental analysis, whereas the size, and morphology was examined by FE‐SEM/EDX and HR‐TEM. The results indicated that the La‐MOF prepared via both methods have the same structure and composition. Meanwhile, the MOF yield, reaction time, morphology, physiochemical and sensing properties were highly depended on the used preparation method. The photoluminescence (PL) study was carried out for the La‐MOF, and the results showed that La‐MOF exhibits strong emission at 558 nm after excitation at 369 nm. Moreover, the PL data indicating that the La‐MOF has highly selective sensing properties for iron (III) competing with different metal ions. The Stern‐Völmer graph shows a linear calibration curve which achieved over a concentration range 1.0–500 μM of Fe³⁺ with a correlation coefficient, detection, and quantitation limits 0.998, 1.35 μM and 4.08 μM, respectively. According to the remarkable quenching of the PL intensity of La‐MOF using various concentrations of Fe³⁺, it was successfully used as a sensor for Fe³⁺detecting in different water resources (pure and waste) samples. The quenching mechanism was studied and it has a dynamic type and due to efficient energy transfer between the La‐MOF and Fe³⁺.     

Deep desulfurization by oxidation using an active ionic liquid‐supported Zr metal–organic framework as catalyst

In this study, a Zr metal–organic framework (UIO‐66) was synthesized with zirconium tetrachloride and terephthalic acid using the solvent method. Then various masses of 1‐methylimidazolium‐3‐propylsulfonate hydrosulfate (PSMIMHSO₄) were supported on the UIO‐66 as catalysts, which were used for catalytic oxidative desulfurization. Sulfur removal using 400 mg of 40% PSMIMHSO₄ supported on the UIO‐66 of greater than 94% was obtained at 313 K for 20 min with an O/S molar ratio of 7:1. The results obtained in this work could provide useful information for the design of water‐stable metal–organic frameworks with permanent porosity in applications of catalytic oxidative desulfurization. Copyright © 2014 John Wiley & Sons, Ltd.     

Highly sensitive and selective detect of p‐arsanilic acid with a new water‐stable europium metal–organic framework

The p‐arsanilic acid (p‐ASA), as an aromatic organoarsenic compounds, had received considerable concerns for their potential toxicity and carcinogenic properties. It was essential to detect p‐ASA with a facile method. In this paper, an europium based fluorescent metal–organic framework (MOF) [Eu₂(clhex)·2H₂O)]·H₂O ( BUC‐69 ) was successfully prepared under hydrothermal conditions with 1,2,3,4,5,6‐cyclohexanehexacarboxylic acid (H₆clhex) as organic linker. BUC‐69 displayed superior fluorescence capability to achieve selective and sensitive detection toward p‐ASA in water, which presented the first example of a MOF‐based sensor to detect p‐ASA. BUC‐69 showed excellent chemical stability in solutions under pH ranging from 4 to 12, which makes it be a potential sensor both in acidity and alkalinity condition. Significantly, BUC‐69 performed well in fluorescent sensing of p‐ASA at a low concentration (10^?6 M) in the simulated wastewater prepared with real lake water, and the results were comparable to the values detected by Inductively Coupled Plasma Optical Emission Spectrometer (ICP‐OES). The corresponding mechanism of fluorescent sensing toward p‐ASA with BUC‐69 was proposed and affirmed.     

Mesostructure organic‐inorganic hybrid ionic liquids based on heteropoly acids: Effect of linkage on the molecular structure and catalytic activity

The new inorganic–organic hybrids based on SO₃H‐functionalized ionic liquids (ILs) and Keggin‐type heteropoly acids (H₃PW₁₂O₄₀, H₃PMo₁₂O₄₀, and H₄SiW₁₂O₄₀; HPAs) are prepared and characterized by FT‐IR, NMR, XRD, CV, SEM/EDX, ICP‐OES, BJH and UV. Different molecular structures according to the different inorganic part were also proved. Potentiometric titration showed a good relationship between catalytic activity and acidity of the catalysts. Electrochemical aspects showed electron transfer ability of the compounds. For understanding catalytic activities of the HPA‐IL hybrids in N‐formylation reaction, effect of catalyst composition, substrate, and reaction conditions were studied. The best SO₃H‐functionalized ionic liquid catalyst was readily recovered and reused for four runs. Easy preparation of the catalyst, simple and easy work‐up, mild reaction conditions, low cost, excellent yields and short reaction times are the key features of this work.     

Hybrid inorganic–organic poly(carborane‐siloxane‐arylacetylene) structural isomers with in‐chain aromatics: Synthesis and properties

Structural isomers of thermo‐oxidatively stable poly(carborane‐siloxane‐arylacetylene) (PCSAA), namely, m‐PCSAA and p‐PCSAA, were synthesized by the reaction of the dimagnesium salts of m‐diethynylbenzene or p‐diethynylbenzene with 1,7‐bis(chlorotetramethyldisiloxyl)‐m‐carborane. The developed polymers have exceptional thermo‐oxidative properties similar to their diacetylene counterpart poly(carborane‐siloxane‐acetylene), PCSA. Thermal treatment of either of the PCSAAs results in a fully crosslinked thermoset by 500 °C resulting from the cycloaddition reactions involving the acetylene and aryl functionalities and subsequent formation of bridging disilylmethylene entities as discerned from Fourier transform infrared, ¹³C and ²⁹Si solid‐state NMR, and XPS studies. X‐ray diffraction analysis revealed that the thermosets obtained from p‐PCSAA possess enhanced crystallinity when compared to that obtained from m‐PCSAA possibly due to more efficient packing interactions of the p‐diethynylbenzene groups during thermoset formation. The presence of the aryl groups in the backbone of the PCSAAs' chains appeared to have enhanced the storage and bulk moduli of their thermosets when compared to the thermoset of PCSA. Dielectric studies of m‐PCSAA and p‐PCSAA revealed segmental relaxation peaks, α, above their glass transition temperatures with p‐PCSAA exhibiting a broader peak with a slower relaxation rate than m‐PCSAA. © 2013 Wiley Periodicals, Inc.^? J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 2638–2650     

Metal–organic framework of amine‐MIL‐53(Al) as active and reusable liquid‐phase reaction inductor for multicomponent condensation of Ugi‐type reactions

Metal–organic framework of NH₂‐MIL‐53(Al), with coordinative unsaturated aluminium sites, has been shown to be active in the Groebke–Blackburn–Bienaymé multicomponent coupling reaction based on Ugi‐type amine and aldehyde condensation over isocyanide and then a cyclization process. Interestingly this reaction occurred under solvent‐free conditions with high yield, in which the NH₂‐MIL‐53(Al) could be recovered and reused for five reaction cycles, giving a total turnover number of 455.     

Solvent-free deposition of hybrid halide perovskites onto thin films of copper iodide p-type conductor

1. Download : Download high-res image (151KB)
2. Download : Download full-size image

     

Self‐assembly of metal–organic framework thin films containing metalloporphyrin and their photocatalytic activity under visible light

With [5,10,15,20‐tetra(4‐carboxyphenyl)porphyrin]Mn(III) and sterically controlled 2,2¢‐dimethyl‐4,4¢‐pyridine as the main raw materials, metal–organic framework thin films containing metalloporphyrin (MnPor‐MOF) with catalytically active sites were built up on functionalized quartz glass surfaces using a layer‐by‐layer self‐assembly method. Retaining active catalytic sites and having a porous reticular structure, the MnPor‐MOF films possessed remarkable photocatalytic activity for oxidative degradation of methylene blue in the presence of hydrogen peroxide under visible‐light irradiation. Most meaningfully, the MnPor‐MOF films were highly stable and simply and conveniently reusable, and are thus a potentially new organic material for photocatalytic wastewater treatment. Copyright © 2015 John Wiley & Sons, Ltd.     

Successive stepwise evolution of host layer‐stacking framework upon the intercalation of mobile vapor guests within side‐chain layers

For the ordered phases of hairy‐rod semiconductive poly(2,5‐bis(3‐tetradecylthiophene‐2‐yl)thieno[3,2‐b]thiophene) (PBTTT) sandwiched in between crystalline platelets of hexamethylbenzene, the successive stepwise evolution of layer‐stacking framework upon guest intercalation has been studied in this research. The direct consequence of the guest intercalation into side‐chain layers is evaluated to cause the lateral shift of thiophene backbones along π–π stacking, resulting in stepwise shift of ultraviolet absorption wavelength. The thermal motions of vapor guests within disordering side‐chain layers subsequently cause progressive expansion of host stacking framework. With the increase in side‐chain length, thicker layers of disordering side chains in liquid crystals (LCs) accommodate additional vapor guests and larger amplitudes of thermal motions of guests, hence promoting the level of reversible d‐spacing change. The mixing between mobile vapor guests and aliphatic side chains is clarified as the mechanism of guest intercalation, which rationalizes successive guest intercalation during heating and the contribution of disordering side‐chain layers. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 1448–1456