1－芳氧乙酰氧基－1－（1H－1，2，4－三唑－1－基）－3，3－二甲基－2－丁酮衍生物的研究

以三乙胺为缚酸剂，用芳氧乙酸同ω－溴代－ω－（１Ｈ－１，２，４－三唑－１－基）频哪酮反应，合成了一系列三唑类新化合物，探讨了化合物的合成方法。通过ＩＲ￣１ＨＮＭＲ、ＭＳ分析及元素分析确定了化合物的结构，生物活性测定结果表明，部分化合物具有良好的除草活性，同时表现出一定程度的植物生长调节活性及杀菌活性．     

2,8,9-三氧杂-5-氮杂-1-硼杂双环[3,3,3]十一碳烷的合成

本文报导了具有N→B配位键的2,8,9-三氧杂-5-氮杂-1-硼杂双环[3,3,3]十一碳烷的合成及性质。化合物(1)的制备已有报导,而化合物(2),(3)则为新的化合物。我们研究了它们的成环条件,制备的最佳条件及化学稳定性。     

一个二维梯状化合物[Ni(μ1，5-dca)2(en)]n的合成，结构和磁性(英)

A new nickel(Ⅱ)-dicyanamide compound, [Ni(dca)₂(en)]_n (1) (dca=dicyanamide anion, [N(CN)₂]^-); en=ethylene diamine), has been synthesized and its structure has been determined by single crystal X-ray diffraction analysis. The crystal is monoclinic, space group P2₁/n with unit cell dimensions: a=0.694 3(1) nm, b=1.041 5(2) nm, c=1.4132(2) nm, and β=90.381°, Z=4, V=1.011 0(3) nm³. In this compound, the adjacent nickel atoms are connected by dca all in μ_1，5-bridging mode to form ladder-like units, which are linked with double dca bridges to generate a regular infinite stair-like structure. Temperature-dependent magnetic susceptibility was also characterized for this compound. CCDC: 208276.     

掺杂稀土元素对细晶BaTiO_3系统耐压及介电性能的影响

研究了稀土元素Ho2O3和Er2O3掺杂BaTiO3基瓷料,其在BaTiO3系晶粒中可抑制晶粒生长,使晶粒尺寸变小,体密度增高,呈现细晶效应,ε峰在整个温区范围内弥散,提高室温下介电常数,减小容量变化率。本系统中三价稀土氧化物Ho2O3和Er2O3等物质同时加入到BaTiO3陶瓷中后,稀土氧化物没有全部进入晶格内部发生取代,其中的一部分与其他添加剂形成一些非铁电相,提高耐压;另一部分留在晶界处,成为晶粒抑制剂,使得晶粒细小,瓷体致密,提高陶瓷的耐压。     

无溶剂一锅法合成1,4-二氢吡啶

碳酸氢铵、醛和1, 3-二羰基化合物于70 ℃无溶剂条件下缩合以86～97%的产率得到1, 4-二氢吡啶.     

轻稀土硝酸盐与邻菲罗啉(Phen)高配比混配配合物的合成和表征

本文采用水-有机溶剂合成了三个稀土硝酸盐与邻菲罗啉的混配配合物,通过元素分析、红外、差示扫描和热重等分析测试手段,确证了配合物的组成为Ln(Phcn)_4(NO_3)_3·3H_2O,并研究了它们的性质。     

Structure and electronic transport properties of the Misfit layer compound (LaSe)1.14(NbSe2)2, „LaNb2Se5”︁

The new misfit layer compound (LaSe)_1.14(NbSe₂)₂ has been synthesized from the elements at 1050- and its structure has been determined by a composite approach. The structure has an alternating stacking sequence of [LaSe] and two [NbSe₂] layers along the c direction. The misfit of the two different layers is occurring along the a direction: a₁(LaSe)=6.0191 Å and a₂(NbSe₂)=3.4372 Å therefore yielding a ratio of 1.751 which is very close to 7/4. An investigation of electrical resistivity was done. The crystal shows superconducting properties at 5.3 K.     

介质对配合物稳定性的影响——Ⅱ.Cu(SCN)+—NaNO3—二氧六环—水体系

本文用分光光度法确定了25℃时配阳离子Cu(SCN)~+在NaNO_3—二氧六环—H_2O介质中的稳定常数。溶剂组成变化范围为0,5,10,15和20wt％二氧六环,离子强度范围为0.2～3.0moledm~(-3),溶液的pH=1.5～1.6。本文提出了基于Pitzer方程式的最小二乘多项式逼近法,确定出各种不同组成混合溶剂中配合物的热力学稳定常数。讨论了该常数和一级介质效应与溶剂组成和介电常数的关系。     

Siloxane-Based Nanobuilding Blocks by Reaction Between Silanediol and Trifunctional Silicon Alkoxides

The preparation of nanostructured organic-inorganic materials by assembling of nanobuilding blocks allows controlling the extent of phase interaction, which in its turn governs structure-properties relationships. We present here the synthesis of siloxane-based nanobuilding blocks prepared by reacting diphenylsilanediol with vinyltriethoxysilane and triethoxysilane. The reaction products were obtained by non-hydrolytic condensation between silanediol and ethoxide groups in inert atmosphere, in the presence of pyridine, triethylamine or butyl lithium. Different synthetic conditions were examined by means of ATR-FTIR and NMR spectroscopies, showing the formation of siloxane bonds. In the case of triethoxysilane the reaction carried out in the presence of pyridine leads to Si–H bond preservation in the final product. Air stable products with improved Si–O–Si hydrolytic stability can be obtained by removal of the base after the reaction completion. The condensation products can be described as a mixture of siloxane rings involving difunctional and trifunctional silicon units.     

配合物形成的三维超分子体系—[Ni(C_6H_4O_2N)_2(H_2O)_4]的水热法合成、晶体结构及热分析

采用水热法用Ni(NO3)26H2O和异烟酸制备出了一种新的由配合物形成的三维超分子体系—[Ni(C6H4O2N)2(H2O)4],并通过X射线衍射对其晶体结构进行了测定。 该晶体属三斜晶系,空间群为Pī, 所得晶胞参数为: a = 6.9228(4), b = 9.6664(19),c = 6.322(1) , a = 96.86(3), b = 113.33(3), g = 110.35(3)°, V = 347.6(1) 3, Z = 1, Mr = 374.98, Dc = 1.791 g/cm3, F(000) = 194, m = 1.443 mm-1。用1362个可观察的 (I > 2s(I))衍射点,修正123个结构参数, 最终偏离因子R = 0.0444,wR = 0.1271。在组成该化合物的基本结构单元[Ni(C6H4O2N)2(H2O)4]中,Ni处于1个稍微拉长的八面体的中心; 各个结构单元之间通过氢键OH…O相互连接,形成了无限伸展的具有层状结构的三维超分子体系。 另外,从差热及热重曲线可以看出,该化合物加热到154 ℃时开始分解, 首先失去4个H2O,再失去2个异烟酸根,最后残余物为NiO。