小分子化合物在离子阱质谱中的分子离子反应研究

利用离子阱质谱的原理和特点，研究了小分子醇、醚、胺、醛、酮等有机化合 物（分子量小于200）在离子阱里的分子离子反应，总结了反应特点和规律，并把 它归类为自身化学电离（SCI）反应。以丁酮、丙烯醇为例，采用FTMS对反应产物 离子进行准确质量测定，验证了它们各自的分子离子反应结果。另外，把该类化合 物（30个）SCI反应的质谱图与NIST98库中的标准EI质谱图进行了比较，建立了 SCI质谱图库，提高了在离子阱质谱上对这类小分子化合物定性分析的准确率。     

Inorganic—Organic Hybrid 18—Molybdodiphosphate Nanoparticles Bullk—modified Carbon Paste Electrode and Its Electrocatalysis

A kind of inorganic‐organic hybrid 18‐molybdodiphosphate nanoparticles ([(C₄H₉)₄N]₆P₂Mo₁₈Q₆₂·4H₂O) was firstly used as a bulk‐modifier to fabricate a three‐dimensional chemically modified carbon paste electrode (CPE) by direct mixing. The electrochemical behavior of the solid nanoparticles dispersed in the CPE in acidic aqueous solution was characterized by cyclic and square‐wave voltammetry. The hybrid 18‐molybdodiphosphate nanoparticles bulk‐modified CPE (MNP‐CPE) displayed a high electrocatalytic activity towards the reduction of nitrite, bromate and hydrogen peroxide. The remarkable advantages of the MNP‐CPE over the traditional polyoxometalates‐modified electrodes are their excellent reproducibility of surface‐renewal and high stability owing to the insolubility of the hybrid 18‐molybdodiphosphate nanoparticles.     

Synthesis and Structure of Dimolybdenum Carbonyl Thiolate Compound [Et4N]2[Mo2（CO）8（SC6H4—CH3—m）2]

1 INTRODUCTION In 1984, thiolate ligand was successfully introduced into molybdenum carbonyl compound by the reaction of Mo(CO)6 with [Et4N]SR( R = C6H5, But) in a moderate condition[1]. From then on, a series of dinuclear molybdenum(0) carbonyl thiolate compounds have been synthesized and characterized by using a variety of thiolate ligands in our research group. It was found that a planar Mo2S2 unit is in the compound [Et4N]2[Mo2(CO)8(SC6H4-CH_3-p)2][2] (2) and a "butterfly" t…     

新颍Mo-Cu-Se簇合物{MoCu3Se3I}(PPh3)3O·0.5CH2Cl2的合成及晶体结构

新颍Mo-Cu-Se簇合物{MoCu₃Se₃I}(PPh₃)₃O·0.5CH₂Cl₂是由［Et₄N］₂MoSe₄、Cu(PPh₃)₂NO₃和KI在乙腈和二氯甲烷1∶1的混合溶剂中反应所得。晶体属单斜晶系，空间群P2_{1相似文献}   

Sol–gel preparation and properties of hydroxypropylcellulose–titania hybrid thin films

Hydroxypropylcellulose (HPC)–titania hybrid thin films were prepared by sol–gel method where titanium tetraisopropoxide Ti(OC₃H₇ ⁱ )₄ was hydrolyzed under acidic conditions in the presence of HPC, followed by dip-coating and drying at 120 °C for 24 h. The viscosity average molecular weight of HPC was 55,000–70,000 or 110,000–150,000, and the TiO₂/(HPC + TiO₂) mass ratio ranged from 0 to 1, which was calculated on the assumption that all Ti(OC₃H₇ ⁱ )₄ is converted into TiO₂. The films were 0.35–1.0 μm thick, transparent in visible region and opaque in ultraviolet (UV) region, where the optical absorption coefficient in UV region increased with increasing titania content. The refractive index increased with increasing titania content, ranging from 1.6 to 1.8 for the hybrid thin films. The pencil hardness increased from 6B to 5H, the durability in hot water significantly increased and the contact angle of water on films increased from 35° to 89° with increasing titania content. Crack-free films could be deposited on organic polymer substrates irrespective of titania or HPC contents, where cracking did not occur at higher HPC contents even when the substrate was bent.     

Comparison between capillary electrophoresis and ion-chromatography for analysis of inorganic anions

Separation and detection of some selected inorganic anions with capillary electrophoresis are shown. The anions are separated in microbore capillaries (25 m* 0.2 m) and detected with a UV-detector. Results are compared with the method of ion exchange chromatography. In consideration of the most important physical and chemical parameters an easy kind of computer simulation for such electropherograms was developed.To get optimal results of separation and UV-detection in capillary electrophoresis some parameters of the device HPE 100, i.e. loading time in the electrokinetic sample injection mode and the running voltage are varied. The behaviour of absorption in the UV region of the chosen anions as well as the influence of pH values in retention behaviour are investigated. There is a simple way to calculate the electrophoretic mobilities from known retention times. Approximate limits of detection for all anions and for each technique are given.     

Residence times in kink sites and Markov chain model of alloy and intermetallic compound deposition

The concept of the residence time τ_ksp of an atom in a kink site has recently been suggested to understand the processes in electrochemical deposition of alloys and intermetallic compounds. Different kink sites with different residence times must be defined for alloys and intermetallic compounds. Based on this model, the finite Markov chain theory is applied to describe the selectivity of the growth process. An analytical relationship between the alloy composition and the metal ion concentrations in the electrolyte is derived. General model parameters are ratios g _i = K _ii/K _ij of equilibrium constants of the reaction of electrolyte ions with different kink sites on the surface (i, j representing different alloy components). These ratios are called selectivity constants. For simple conditions, the equation g _i ≈ τ_ii/τ_ij connects the g _i values with the residence times. The theory is tested in the deposition of alloys Co-Ni (anomalous co-deposition) and Ni-Mo (induced co-deposition). Additionally, Bi₂Te₃, an example of stoichiometric semiconductor deposition, is treated. Published in Russian in Elektrokhimiya, 2006, Vol. 42, No. 10, pp. 1216–1223. The text was submitted by the authors in English.     

毛细管区带电泳法快速测定复方布洛芬片的有效成分

研究了用毛细管区带电泳法快速测定复方布洛芬片中布洛芬和伪麻黄碱含量的方法。在０．０２５ｍｏｌ／Ｌ的磷酸盐缓冲液（ｐＨ８．１）中，上述两组分可在３ｍｉｎ内得以完全分离，用紫外检测器在２１０ｎｍ处检测，并以外标法定量。１１次测定含有９．５ｍｇ／Ｌ盐酸伪麻黄碱和６６．７ｍｇ／Ｌ布洛芬的试样溶液，相对标准偏差为２．９％（伪麻黄碱）和１．９％（布洛芬），回收率为１０３．１％（伪麻黄碱）和９７．６％（布洛芬）。应用毛细管区带电泳法测定复方布洛芬片剂的含量，所得结果与ＨＰＬＣ法一致。     

计算金属间化合物热力学性质的新方法

用一简单的相关函数式对金属间化合物的热力学性质进行拟合，提出了一种计算金属间化合物热力学性质的新方法，并用此方法计算了二元金属间化合物的常温热容和熵。计算结果表明，该方法简单，且能满足一定的计算精度，有一定的实用价值。     

The synthesis and crystal structures of the first rare-earth alkaline-earth selenite chlorides MNd10(SeO3)12Cl8 (M=Ca and Sr)

Two new alkaline-earth Nd selenite chlorides MNd₁₀(SeO₃)₁₂Cl₈ (M=Ca, Sr) were obtained using crystal growth from alkaline-earth chloride melts in quartz tubes. These new compounds crystallize in the orthorhombic system in space group C cca (#68). The compounds were studied by energy dispersive X-ray spectroscopy (EDX) and X-ray diffraction. It was shown that both compounds adopt the same structure type, constructed by complex [M₁₁(SeO₃)₁₂]⁸⁺ slabs separated by chloride anion layers perpendicular to the longest cell parameter. The SeO₃ groups show a pyramidal shape and may be described as SeO₃E tetrahedra. Such SeO₃ groups decorate the Nd-O skeletons forming the [M₁₁(SeO₃)₁₂]⁸⁺ slabs.