Positive Effect of Cannabis sativa L. Herb Extracts on Skin Cells and Assessment of Cannabinoid-Based Hydrogels Properties

The skin is an organ that is constantly exposed to many external factors that can affect its structure and function. Due to the presence of different cannabinoid receptors on many types of skin cells, cannabinoids can interact directly with them. Therefore, as part of this work, the impact of two types of Cannabis sativa L. herb extracts on keratinocytes and fibroblasts was assessed. The content of biologically active compounds such as phenols, flavonoids, chlorophylls and cannabinoids was evaluated. The antioxidant capacity of prepared extracts using the DPPH radical, H₂DCFDA probe and measurement of superoxide dismutase activity was also assessed. The cytotoxicity of hemp extracts was determined using the Alamar Blue, Neutral Red and LDH assays. The ability of the extracts to inhibit the activity of matrix metalloproteinases, collagenase and elastase, was assessed. Preparations of model hydrogels were also prepared and their effect on transepidermal water loss and skin hydration was measured. The obtained results indicate that hemp extracts can be a valuable source of biologically active substances that reduce oxidative stress, inhibit skin aging processes and positively affect the viability of skin cells. The analysis also showed that hydrogels based on cannabis extracts have a positive effect on skin hydration.     

V掺杂ZnO透明导电薄膜研究

本文分别采用磁控溅射技术与基于密度泛函理论的平面波赝势方法两种方式, 对高价态差元素V掺杂ZnO薄膜进行研究. 实验研究结果表明: V的掺入并未改变ZnO的生长方式, 所制备的薄膜都呈(002)择优生长; 随着衬底温度增加, VZO薄膜的结晶质量逐步改善, 当衬底温度超过280 ℃时薄膜的结晶质量恶化; 在280 ℃时获得的VZO薄膜电阻率最低3.8×10^-3 Ω·m, 500-2000 nm平均透过率高于85%. 理论模拟结果表明: V以替位形式掺入ZnO六角纤锌矿晶格结构中, 费米能级进入导带, 材料表现出n 型半导体的特性, 导电电子主要由V 3d及O 2p电子轨道提供. 理论计算结果与实验结果的一致性, 表明VZO薄膜具有作为高效Si基薄膜太阳电池透明导电薄膜的应用潜力.     

Acceleration and mitigation of carrier‐induced degradation in p‐type multi‐crystalline silicon

Recently, a new carrier‐induced defect has been reported in multi‐crystalline silicon (mc‐Si), and has been shown to be particularly detrimental to the performance of passivated emitter and rear contact (PERC) cells. Under normal conditions, this defect can take years to fully form. This Letter reports on the accelerated formation and subsequent passivation of this carrier‐induced defect through the use of high illumination intensity and elevated temperatures resulting in passivation within minutes. The process was tested on industrial mc‐Si PERC solar cells, where degradation after a 100 hour stability test was suppressed to only 0.1% absolute compared to 2.1% for non‐treated cells. (© 2016 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

Hybrid process for texturization of diamond wire sawn multicrystalline silicon solar cell

Acid texture is difficult for diamond wire sawn (DWS) multicrystalline silicon (mc‐Si) wafer owing to the inhomogeneous distribution of damage layer on the surface. In this article, metal‐assisted chemical etching (MACE) has been selected for introducing a porous seeding layer to induce acid texturing etching. SEM results show that the oval pit structures coverage get obvious improvement even on the smooth areas. Owing to the further improved light absorption ability by second MACE and nanostructure rebuilding (NSR) process, nanostructured DWS mc‐Si solar cell has exhibited a conversion efficiency of 17.96%, which is 0.45% higher than that of DWS wafer with simple acid texture process. (© 2016 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

Multi‐crystalline silicon solar cells with metal‐assisted nano‐texturing using HNO3 as hole injection agent

In this study, metal‐assisted etching (MAE) with nitric acid (HNO₃) as a hole injecting agent has been employed to texture multi‐crystalline silicon wafers. It was previously proven that addition of HNO₃ enabled control of surface texturing so as to form nano‐cone shaped structures rather than nanowires. The process parameters optimized for optically efficient texturing have been applied to multi‐crystalline wafers. Fabrication of p‐type Al:BSF cells have been carried out on textured samples with thermal SiO₂/PECVD‐SiN_x stack passivation and screen printed metallization. Firing process has been optimized in order to obtain the best contact formation. Finally, j_sc enhancement of 0.9 mA/cm² and 0.6% absolute increase in the efficiency have been achieved. This proves that the optimized MAE texture process can be successfully used in multi‐crystalline wafer texturing with standard passivation methods.

J –V curves and SEM images of the nano and iso‐textured samples. j_sc enhancement of 0.9 mA/cm² together with 0.6% absolute efficiency gain was observed on nano‐textured samples.     

Synthesis,anti‐inflammatory activity,and molecular docking study of novel azo bis antipyrine derivatives against cyclooxygenase‐2 enzyme

We have synthesized a new series of azo‐bis antipyrine derivatives from a one‐pot multicomponent Knoevenagel/Michael addition reaction of antipyrine, with a diversity of azo aldehydes in ethanol and L‐Proline as a catalyst under reflux condition. The anti‐inflammatory activity of the final products was assessed using the inhibition of albumin denaturation technique. Compound 3f showed an inhibitory effect with IC₅₀ values of 3.6 μM with respect to the standard anti‐inflammatory drug Aspirin, with IC₅₀ values of 2 μM. In addition, molecular docking was performed to confirm the in vitro results against the enzymatic inhibition activity of COX‐2 enzymes in which compound 3f showed good binding affinity with an inhibition constant (Ki) of 1.79 nM.     

Remarkably improved cycling stability of 3D porous Cu–Sn anode for lithium-ion full cells by adjusting working voltage range

Numerous studies confirm that three dimensional porous Cu–Sn (3DP Cu–Sn) anode possesses good application prospect in light of its desirable electrochemical performance on lithium ion half cells, but there are a few related systematic researches on lithium ion full cells until now, which is indispensable before its commercialization. Herein, the effects of galvanostatic charge-discharge voltage range on the cycling stability of 3DP Cu–Sn anode for lithium ion full cells are investigated systematically. The results show that the suitable charge-discharge voltage range plays a key role in improving the reversible capacity and cycling stability of the 3DP Cu–Sn||LiCoO₂ full cell, which is closely related to maintaining the electrode structure stable by controlling the amount of Li⁺ extracted and inserted. Especially, in the voltage range of 1.2–3.9 ​V, the full cell exhibits remarkably improved electrochemical properties with the high initial reversible capacity of 2.71 ​mAh cm⁻² and 71.95% capacity retention upon 80 cycles. We believe that this work can provide a significant reference for the practical application of porous Sn-based anodes.     

非平衡溶剂化新理论在有机染料电子光谱中的应用

总结了非平衡溶剂化新理论和在量子化学软件Q-Chem中基于含时密度泛函理论(TD-DFT)实现溶剂效应下计算电子吸收和发射光谱的数值解方法.采用该方法计算了染料敏化太阳能电池(DSSCs)中三苯胺型有机染料■在真空和乙腈溶剂中的电子结构与光谱性质,研究发现,π共轭桥上碳碳双键的个数和溶剂效应会促进光电转换.     

Excellent passivation of thin silicon wafers by HF‐free hydrogen plasma etching using an industrial ICPECVD tool

In this work, hydrogen plasma etching of surface oxides was successfully accomplished on thin (～100 µm) planar n‐type Czochralski silicon wafers prior to intrinsic hydrogenated amorphous silicon [a‐Si:H(i)] deposition for heterojunction solar cells, using an industrial inductively coupled plasma‐enhanced chemical vapour deposition (ICPECVD) platform. The plasma etching process is intended as a dry alternative to the conventional wet‐chemical hydrofluoric acid (HF) dip for solar cell processing. After symmetrical deposition of an a‐Si:H(i) passivation layer, high effective carrier lifetimes of up to 3.7 ms are obtained, which are equivalent to effective surface recombination velocities of 1.3 cm s^–1 and an implied open‐circuit voltage (V_oc) of 741 mV. The passivation quality is excellent and comparable to other high quality a‐Si:H(i) passivation. High‐resolution transmission electron microscopy shows evidence of plasma‐silicon interactions and a sub‐nanometre interfacial layer. Using electron energy‐loss spectroscopy, this layer is further investigated and confirmed to be hydrogenated suboxide layers. (© 2015 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)