Improved efficiency of organic solar cells with modified hole‐extraction layers

The aim of this work has been to study the influence of modified hole‐extraction layers on the performance of organic solar cells (OSCs) based on blends of poly (3‐hexylthiophene) and [6,6]‐phenyl‐C₆₁‐butyric acid methyl ester. The hole‐extraction layers consist of poly (3,4‐ethylene dioxythiophene):polystyrene sulfonic acid (PEDOT:PSS) doped with different concentrations of bromine. Compared with pristine OSC without adding bromine to the hole‐extraction layer, the bromine‐doped OSCs show a 49% increase in the power conversion efficiency (from 2.12 to 3.16%), which could be attributed to the increase of electrical and optical properties of PEDOT:PSS films after the addition of bromine. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 50: 125–128, 2012     

Benzodifuran‐containing well‐defined π‐conjugated polymers for photovoltaic cells

Two well‐defined alternating π‐conjugated polymers containing a soluble electroactive benzo[1,2‐b:4,5‐b′]difuran (BDF) chromophore, poly(BDF‐(9‐phenylcarbazole)) (PBDFC), and poly(BDF‐benzothiadiazole) (PBDFBTD) were synthesized via Sonogashira copolymerizations. Their optical, electrochemical, and field‐effect charge transport properties were characterized and compared with those of the corresponding homopolymer PBDF and random copolymers of the same overall composition. All these polymers cover broad optical absorption ranges from 250 to 750 nm with narrow optical band gaps of 1.78–2.35 eV. Both PBDF and PBDFBTD show ambipolar redox properties with HOMO levels of ?5.38 and ?5.09 eV, respectively. The field‐effect mobility of holes varies from 2.9 × 10^?8 cm² V^?1 s^?1 in PBDF to 1.0 × 10^?5 cm² V^?1 s^?1 in PBDFBTD. Bulk heterojunction solar cell devices were fabricated using the polymers as the electron donor and [6,6]‐phenyl‐C₆₁‐butyric acid methyl ester as the electron acceptor, leading to power conversion efficiencies of 0.24–0.57% under air mass 1.5 illumination (100 mW cm^?2). These results indicate that their band gaps, molecular electronic energy levels, charge mobilities, and molecular weights are readily tuned by copolymerizing the BDF core with different π‐conjugated units. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

A comparative study of fluorine substituents for enhanced stability of flexible and ITO‐free high‐performance polymer solar cells

Two low‐band gap polymer series based on benzo[1,2‐b:4,5‐b′]dithiophene (BDT) and dithienylbenzothiadiazole, with different numbers of fluorine substituents on the 2,3,1‐benzothiadiazole unit, have been synthesized and explored in a comparative study of the photochemical stability and operational lifetime in flexible large area roll‐coated bulk heterojunction solar cells. The two polymer series have different side chains on the BDT unit, namely 2‐hexyldecyloxy (BDT_HDO) ( P1–P3 ) or 2‐hexyldecylthiophene (BDT_THD) ( P4–P6 ). The photochemical stability clearly shows that the stability enhances along with the number of fluorine atoms incorporated on the polymer backbone. Fabrication of the polymer solar cells based on the materials was carried out in ambient atmosphere on a roll coating/printing machine employing flexible and indium‐tin‐oxide‐free plastic substrates. Solar cells based on the P4–P6 series showed the best performance, reaching efficiencies up to 3.8% for an active area of 1 cm², due to an enhanced current compared to P1–P3 . Lifetime measurements, carried out according to international summit on OPV stability (ISOS), of encapsulated devices reveals an initial fast decay for P1–P6 in the performance followed by a much slower decay rate, still retaining 40–55% of their initial performance after 250 h of testing under ISOS‐L‐1 conditions. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 , 52, 893–899     

A ghost-cell immersed boundary method for large-eddy simulations of compressible turbulent flows

A methodology to perform a ghost-cell-based immersed boundary method (GCIBM) is presented for simulating compressible turbulent flows around complex geometries. In this method, the boundary condition on the immersed boundary is enforced through the use of ‘ghost cells’ that are located inside the solid body. The computations of variables on these ghost cells are achieved using linear interpolation schemes. The validity and applicability of the proposed method is verified using a three-dimensional (3D) flow over a circular cylinder, and a large-eddy simulation of fully developed 3D turbulent flow in a channel with a wavy surface. The results agree well with the previous numerical and experimental results, given that the grid resolution is reasonably fine. To demonstrate the capability of the method for higher Mach numbers, supersonic turbulent flow over a circular cylinder is presented. While more work still needs to be done to demonstrate higher robustness and accuracy, the present work provides interesting insights using the GCIBM for the compressible flows.     

Malva sylvestris L. extract suppresses desferrioxamine‐induced PGE2 and PGD2 release in differentiated U937 cells: the development and validation of an LC‐MS/MS method for prostaglandin quantification

Malva sylvestris is a species used worldwide as an alternative to anti‐inflammatory therapies; however, its mechanism of action remains unknown. In this paper, the anti‐inflammatory effects of M. sylvestris alcoholic extracts were evaluated by measuring the pro‐inflammatory mediators PGE₂ and PGD₂ in desferrioxamine‐stimulated phorbol 12‐myristate 13‐acetate‐differentiated U937 cells. An HPLC‐DAD fingerprint of the M. sylvestris extract was performed and caffeic acid, ferulic acid and scopoletin were identified and quantified. An HPLC‐MS/MS method was developed and validated to separate and measure the prostaglandins. The lower limits of detection (~0.5 ng/mL for PGE₂ and PGD₂) and quantification (1.0 ng/mL for PGE₂ and PGD₂) indicated that the method is highly sensitive. The calibration curves showed excellent coefficients of correlation (r > 0.99) over the range of 1.0–500.0 ng/mL, and at different levels, the accuracy ranged from 96.4 to 106.4% with an RSD < 10.0% for the precision study. This method was successfully applied using U937‐d cells. A significant dose‐dependent reduction of PGE₂ and PGD₂ levels occurred using 10 µg/mL (10.74 ± 2.86 and 9.60 ± 6.89%) and 50 µg/mL of extract (48.37 ± 3.24 and 53.06 ± 6.15%), suggesting that the anti‐inflammatory mechanisms evoked by M. sylvestris may be related to modulation of these mediators. Copyright © 2014 John Wiley & Sons, Ltd.     

Platinum Nanoparticles Modified with Perfluorinated Alkylamines as a Model Cathode Catalyst for Fuel Cells

Platinum nanoparticles (NPs) modified with undecafluorohexylamine (UFHA) and octylamine were synthesized as a novel model cathode catalyst for fuel cells. The modified Pt NPs were well characterized by FTIR, X‐ray photoelectron spectroscopy, thermogravimetric analysis, and transmission electron microscopy. These NPs supported on carbon black were applied as electrocatalysts for the oxygen reduction reaction. The UFHA‐modified Pt NP catalyst showed high electrocatalytic activity and durability compared to a commercial catalyst. Besides suppression of undesired oxide formation on the Pt surface, the affinity between the perfluorinated alkyl chains of UFHA and Nafion^® improved the catalyst activity by creating a desirable proton conduction path. Additionally, UFHA modification improved durability by suppressing Pt dissolution and carbon corrosion because of restricted water accessibility. The β ‐oxide formation, which is responsible for Pt dissolution, was significantly attenuated by surface modification.     

Synthesis and proton conductivity of sulfonated,multi‐phenylated poly(arylene ether)s

A series of sterically‐encumbered, sulfonated, poly(arylene ether) copolymers were synthesized and their proton conductivity examined. The series was prepared by copolymerizing a novel monomer, 2″,3″,5″,6″‐tetraphenyl‐[1,1′:4',1″:4″,1″':4″',1″″‐quinquephenyl]‐4,4″″‐diol, with 4,4'‐difluorobenzophenone and bisphenol A. Subsequent sulfonation and solution casting provided membranes possessing ion exchange capacities of 1.9 to 2.7 mmol/g and excellent mechanical properties (Young's modulus, 0.2–1.2 GPa; tensile strength, 35–70 MPa; elongation at break, 62–231%). Water uptake ranged from 34 to 98 wt% at 80 °C/100% RH. Proton conductivities ranged between 0.24 to 16 mS/cm at 80 °C/60% RH, and 3 to 167 mS/cm at 80 °C/95% RH. TEM analysis of the polymers, in the dehydrated state, revealed isolated spherical aggregates of ions, which presumably coalesce when hydrated to provide highly conductive pathways. The strategy of using highly‐encumbered polymer frameworks for the design of mechanically‐robust and dimensionally‐stable proton conducting membranes is demonstrated. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2579‐2587     

Naphthodithiophene-based donor materials for solution processed organic solar cells

As an emerging donor building block, naphthodithiophene (NDT) is causing more concerns in the field of organic semiconductors. With the rigid and coplanar molecule structure, NDT will exhibit more application space relying on its own advantage for facilitating the charge carrier transport. In this review article, we have summarized the development progress on the NDT-based donor materials for solution processed organic solar cells. Discussions and comments on those representative NDT type materials about structure and property are also presented.     

Anti‐inflammatory activities and glycerophospholipids metabolism in KLA‐stimulated RAW 264.7 macrophage cells by diarylheptanoids from the rhizomes of Alpinia officinarum

Alpinia officinarum is used for its anti‐inflammatory activity historically in China. Diarylheptanoids isolated from A. officinarum play important biological roles in the prevention and treatment of inflammatory disorders. Seven diarylheptanoids (1–7) were isolated from A. officinarum. The cell viabilities and anti‐inflammatory activities of diarylheptanoids were evaluated by MTT assay and tumor necrosis factor‐α production in Kdo2‐lipid A‐stimulated RAW 264.7 cells in vitro. The relationships between their anti‐inflammatories and structure‐activities are discussed. The results indicated that compounds 1 and 3–7 had significant anti‐inflammatory activities. The relationships between inflammation and phospholipids metabolism were elucidated by multivariate data analysis. Twenty‐two potential biomarkers were identified in inflammatory group vs. blank group, and 11 potential biomarkers were identified for inflammatory group vs. drug‐treatment groups. Ten common phospholipids were characterized. On the basis of a previous study in our laboratory, we found that phosphatidylethanolamine (18:0/18:1) might be the important glycerophospholipid biomarker in inflammation. In this study, we firstly combined anti‐inflammatory activities and glycerophospholipids changes of traditional Chinese medicine. This work suggests that the anti‐inflammatory activities of diarylheptanoids might be significantly related to glycerophospholipids and could provide a useful database for investigating the anti‐inflammatory effects of traditional Chinese medicine.