Misfit‐Layered Bi1.85Sr2Co1.85O7.7−δ for the Hydrogen Evolution Reaction: Beyond van der Waals Heterostructures

Recent research on stable 2D nanomaterials has led to the discovery of new materials for energy‐conversion and energy‐storage applications. A class of layered heterostructures known as misfit‐layered chalcogenides consists of well‐defined atomic layers and has previously been applied as thermoelectric materials for use as high‐temperature thermoelectric batteries. The performance of such misfit‐layered chalcogenides in electrochemical applications, specifically the hydrogen evolution reaction, is currently unexplored. Herein, a misfit‐layered chalcogenide consisting of CoO₂ layers interleaved with an SrO–BiO–BiO–SrO rock‐salt block and having the formula Bi_1.85Sr₂Co_1.85O_7.7?δ is synthesized and examined for its structural and electrochemical properties. The hydrogen‐evolution performance of misfit‐layered Bi_1.85Sr₂Co_1.85O_7.7?δ, which has an overpotential of 589 mV and a Tafel slope of 51 mV per decade, demonstrates the promising potential of misfit‐layered chalcogenides as electrocatalysts instead of classical carbon.     

Electrodes/Electrolyte Interfaces in the Presence of a Surface‐Modified Photopolymer Electrolyte: Application in Dye‐Sensitized Solar Cells

Since hundreds of studies on photoanodes and cathodes show that the electrode/electrolyte interfaces represent a key aspect at the base of dye‐sensitized solar cell (DSSC) performances, it is reported here that these interfaces can be managed by a smart design of the spatial composition of quasi‐solid electrolytes. By means of a cheap, rapid, and green process of photoinduced polymerization, composition‐tailored polymer electrolyte membranes (PEMs) with siloxane‐enriched surfaces are prepared, and their properties are thoroughly described. When assembled in DSSCs, the interfacial action promoted by the composition‐tailored PEMs enhances the photocurrent and fill factor values, thus increasing the global photovoltaic conversion efficiency with respect to the non‐modified PEMs. Moreover, the presence of the siloxane‐chain‐enriched surface increases the hydrophobicity and reduces the water vapor permeation into the device, thus enhancing the cell′s durability.     

Effects of Mn2+ on the chrome‐free colored Ti/Zr‐based conversion coating on 6063 aluminum alloy

The conversion coating with golden color and improved corrosion resistance had been prepared by adding Mn²⁺ in the Ti/Zr conversion coating solution. Comparing with that of conversion coating without Mn²⁺, the optimal treatment time of this conversion coating was much shorter and the corrosion resistance was obviously improved. The effect of Mn²⁺ on the formation of golden Ti/Zr conversion coating was thoroughly investigated by means of energy dispersive X‐ray spectroscopy, SEM, XPS, and Raman and electrochemical workstation. The results showed that the conversion coating had a double‐layer structure: the outer layer consisted of the metal‐organic complex and the inner layer was mainly made up of Na₃AlF₆. Mn²⁺ was oxidized into MnOOH in solution and precipitated on the substrate surface which provided the nucleus to Na₃AlF₆ crystal and accelerated Na₃AlF₆ crystal formation and also made the microstructure of conversion coating change to the cubic. The mechanism of the formation of the conversion coating can be deemed as nucleation, growth of Na₃AlF₆ crystal, and formation of metal‐organic complex. Copyright © 2015 John Wiley & Sons, Ltd.     

变频节能设计实验的实践探索

在化工原理实验课程中,流体流动综合实验包含了离心泵曲线的测定、流量计的标定等实验项目。通过最新变频技术开展了离心泵流量的测定与频率的关系的实验,有效弥补了目前教材中缺乏有关变频节能内容的不足,具有很高的创新性,对于提高学生主动学习能力具有重要的意义,培养了学生的工程素质,提高了他们的综合能力。     

Alleviation of ion suppression effect in sonic spray ionization with induced alternating current voltage

In this study, alleviation of ion suppression effect in sonic spray ionization mass spectrometry (SSI‐MS) was investigated. Ion suppression effect was firstly compared between electrospray ionization (ESI) and conventional SSI, and more severe ion suppression effect was observed with SSI. Ion suppression effect of SSI was also found difficult to be alleviated by simply optimizing major parameters. Alternatively, we found that with the assistance of an alternating current (AC) voltage with low amplitude, the ion suppression effect was greatly alleviated (comparable with conventional ESI). That AC voltage was applied outside the SSI spray tip, and no direct contact between the electrode and spray solution was necessary. Besides the alleviation of the ion suppression effect, this newly‐developed method, termed as induced electrosonic spray ionization (IESSI), appeared to preserve similar charge state distribution with SSI for protonated cytochrome c, hemoglobin, and bradykinin. IESSI could also obtain significantly improved ion intensities (~1000‐fold over conventional SSI). In addition, tolerance of concentrated salts for IESSI‐MS was investigated through the analysis of cytochrome c in the presence of concentrated sodium chloride (NaCl) or ammonium acetate (NH₄OAc). Copyright © 2014 John Wiley & Sons, Ltd.     

On the induced‐fit mechanism of substrate‐enzyme binding structures of nylon‐oligomer hydrolase

We present a detailed computational investigation of the induced‐fit motion in a nylon‐oligomer hydrolase (NylB) upon substrate binding. To this aim, we resort on the recently introduced parallel cascade selection molecular dynamics approach, allowing for an accelerated access to the set of conformational changes from an open‐ to a closed‐state structure to form the enzyme‐substrate complex in a specific induce‐fit mechanism. The structural investigation is quantitatively complemented by free energy analyses within the umbrella sampling algorithm accompanied by weighted histogram analysis. We find that the stabilization free energy is about 1.4 kcal/mol, whereas the highest free energy barrier to be overcome is about 2.3 kcal/mol. Conversely, the energetic contribution for the substrate binding is about 20 kcal/mol, as estimated from Generalized Born/Surface Area. This means that the open‐close induced‐fit motion could occur frequently once the substrate binds to the open state of NylB. © 2014 Wiley Periodicals, Inc.     

傅立叶变换红外光谱技术在超临界CO2作用聚合物体系中的应用

超临界CO₂（scCO₂）作为一种物理化学性质优良、具有高扩散速率及优良溶解性能的溶剂,在科学研究及工业生产中广受青睐。将scCO₂应用于聚合物体系中,CO₂ 与聚合物间特殊的相互作用有利于CO₂分子在聚合物中的吸附与扩散。同时通过CO₂的吸附及其对聚合物的溶胀和塑化作用,聚合物所处微观化学环境以及整体结构性质会发生一定的变化。由于傅立叶变换红外光谱（FTIR）技术能够有效地考察化学环境变化对分子结构造成的影响,这一表征技术在超临界CO₂作用体系中广为应用。本文主要选取了近年来利用FTIR技术考察scCO₂作用于聚合物体系的一些实例,从CO₂-聚合物相互作用机理,scCO₂对聚合物或生物大分子的加工过程的影响两方面,阐述了利用红外光谱技术在scCO₂作用体系中的应用以及前景。     

温和条件下元素对M~(2+)/Fe~(2+)/Fe~(3+)-LDHs转化成尖晶石铁氧体过程的影响(英文)

研究了二价金属离子在温和条件下(低于100℃,暴露于空气中)从水滑石M2+/Fe2+/Fe3+-LDHs(M=Co,Ni,Mn,Zn)转化成尖晶石铁氧体的过程中所起的作用。结果表明,该转化过程不仅与晶化温度有关,还与M2+在元素周期表中所处的位置有关。当这些二价金属离子处于同一周期并且相邻较近时,M2+的半径越大,水滑石微晶向尖晶石铁氧体的转化就越容易。此外,Fe2+在转化过程中起着至关重要的作用,如果没有Fe2+的参与,在此条件下的转化将无法进行。     

具有聚集诱导发光特性的咔唑衍生物的合成及其理化性质研究

以咔唑、亚芴基肼等为原料,通过suzuki反应合成了2个新型咔唑衍生物:N-乙基-3,6-双(亚芴基肼基-5-亚甲基-2-噻吩)咔唑(S1)和N-(亚芴基肼基-4-亚甲基苯基)-3,6-双(亚芴基肼基-5-亚甲基-2-噻吩)咔唑(S2)。用FTIR、1HNMR、元素分析对S1和S2的结构进行表征,并考察其紫外吸收光谱、荧光光谱、电化学行为和热稳定性。结果表明:S1和S2薄膜的最大发射波长分别在637和649nm处,均发射红色荧光,且S1和S2均具有良好的聚集诱导发光(AIE)特性;S1和S2的HOMO能级分别是-5.26和-5.29e V,与正电极(ITO)的功函数(-4.8 e V)相匹配,可有效降低空穴注入能垒,有利于空穴的传输;S1和S2的热分解温度分别是351和360℃,均具有良好的热稳定性。     

Direct on-strip analysis of size- and time-resolved aerosol impactor samples using laser induced fluorescence spectra excited at 263 and 351 nm

We report a novel atmospheric aerosol characterization technique, in which dual wavelength UV laser induced fluorescence (LIF) spectrometry marries an eight-stage rotating drum impactor (RDI), namely UV-LIF-RDI, to achieve size- and time-resolved analysis of aerosol particles on-strip. The UV-LIF-RDI technique measured LIF spectra via direct laser beam illumination onto the particles that were impacted on a RDI strip with a spatial resolution of 1.2 mm, equivalent to an averaged time resolution in the aerosol sampling of 3.6 h. Excited by a 263 nm or 351 nm laser, more than 2000 LIF spectra within a 3-week aerosol collection time period were obtained from the eight individual RDI strips that collected particles in eight different sizes ranging from 0.09 to 10 μm in Djibouti. Based on the known fluorescence database from atmospheric aerosols in the US, the LIF spectra obtained from the Djibouti aerosol samples were found to be dominated by fluorescence clusters 2, 5, and 8 (peaked at 330, 370, and 475 nm) when excited at 263 nm and by fluorescence clusters 1, 2, 5, and 6 (peaked at 390 and 460 nm) when excited at 351 nm. Size- and time-dependent variations of the fluorescence spectra revealed some size and time evolution behavior of organic and biological aerosols from the atmosphere in Djibouti. Moreover, this analytical technique could locate the possible sources and chemical compositions contributing to these fluorescence clusters. Advantages, limitations, and future developments of this new aerosol analysis technique are also discussed.