Review of Fluorescence Spectroscopy in Environmental Quality Applications

Fluorescence spectroscopy is an optical spectroscopic method that has been applied for the assessment of environmental quality extensively during the last 20 years. Most of the earlier works have used conventional light sources in spectrofluorometers to assess quality. Many recent works have used laser sources of light for the same purpose. The improvement of the energy sources and of the higher resolution spectrometers has led to a tremendous increase in applications. The motivation for the present review study is the increasing use of laser sources in environmental applications. The review is divided in two parts. The fundamental principles of fluorescence spectroscopy are described in the first part. The environmental applications are described in the second part.     

Propagation of Light in an Ensemble of Tripod Level Atoms

We study the propagation of a quantum probe light in an ensemble of tripod level atoms when the atoms are coupled to two other classical control fields. First we calculate the dispersion properties, such as susceptibility and group velocity, of the probe light within such an atomic medium under the case of three-photon resonance via the dynamical algebra method of collective atomic excitations. Then we calculate the dispersion of the probe light in the case that two classical control fields have the different detunings to the relative atomic transitions. Our results show that in both cases the phenomenon of electromagnetically induced transparency can occur. Especially under the second case, we can find two transparency windows for the probe light.     

硅锗合金Seebeck系数影响因素的研究

作为一种洁净能源,硅锗合金的热电转换性能的研究越来越受到人们的重视.本文重点研究了不同Ge浓度的硅锗合金以及Si、Ge单晶在300～1100K温度范围内,Seebeck系数随温度的变化.并对组分相同导电类型不同、晶向不同以及结晶状态不同的样品的Seebeck系数进行了比较.在研究温度区间,Seebeck系数的绝对值大小一般在200～600μV/K之间,随温度不同连续变化.通过对比发现SiGe合金的Seebeck系数大小不仅与Ge的浓度和温度有关,其他因素对其绝对值也有影响,其中晶向最为明显,表现出了明显的各向异性.此外,材料本身的电阻率除了作为一个热电参数影响最优值外,其大小还对Seebeck系数的绝对值有影响,即掺杂济浓度对Seebeck系数的影响.     

熔融纺丝制备中空纤维膜研究进展

中空纤维膜作为一种重要的分离膜材料,其制备方法一直以来是膜技术研究领域的热点。相对于溶液法纺丝制膜方法而言,熔融纺丝法具有使用溶剂量少、环境友好、所得中空纤维膜力学性能较优等特点,已成为目前中空纤维膜制备的重要技术之一。本文根据工艺将熔融纺丝制膜方法区分为熔融纺丝-拉伸法和热致相分离法,分别就这两种方法中空纤维膜的制备技术及致孔机理进行介绍,并对二者的研究历史及现状进行了论述,最后,还指出了熔融纺丝制备中空纤维膜研究领域有待解决的问题。     

电场的增强作用对介质膜光栅损伤形貌的影响

研究了电场在介质膜光栅结构中的增强效应对其抗激光损伤阈值的影响.使用傅里叶模式方法计算了电场在介质膜光栅浮雕结构内的分布.数值分析表明：电场在介质膜光栅中增强的最大值为入射光的2倍,其最大的位置出现在相对于入射光对面的光栅槽侧壁。实验测试介质膜光栅样品在1 064 nm和12 ns, 51.2°和TE偏振光入射时,其抗激光损伤阈值为6.61 J/cm2.对损伤形貌进行扫描电镜精确分析,发现介质膜光栅的初始损伤产生于电场在介质膜光栅内增强最大的位置处.     

光诱导准一维光子晶格中离散空间光孤子的相互作用

基于分步束传播法数值分析了离散空间光孤子在准一维光诱 导光子晶格中的相干与非相干相互作用过程. 结果表明: 对于相干孤子, 同相时相互吸引, 反相时相互排斥. 然而, 由于非线性响应的各向异性, 横向排布的非相干孤子会因间隔波导数目的增加而由相互吸引变为相互排斥. 并且, 沿对角方向排布的两个非相干孤子在孤子相 互作用力和布拉格反射的共同影响下, 会呈现出"钟摆式"振荡传输现象. 研究结果有助于进一步理解非线性各向异性对离散孤子相互作用的影响机制, 并为后续实验研究提供理论参考.     

溶剂效应对聚苯撑乙烯掺杂二酰亚胺太阳电池性能的影响

研究了不同溶剂对2-甲氧基-5-(2-乙基己氧基)-1,4-对苯撑乙烯(MEH-PPV):N,N′-二(1-乙基丙基)-3,4,9,10-四羧酸二亚酰胺(EP-PTC)复合膜的形貌及其对以MEH-PPV:EP-PTC复合膜为活性层的太阳电池性能的影响.结果表明:非芳香性溶剂不利于MEH-PPV与EP-PTC的相容,MEH-PPV与EP-PTC两相间形成微米尺寸(0.5—5μm)的相分离,因而以MEH-PPV:EP-PTC复合膜为活性层的太阳电池中的电荷分离效率较低,进而电池的能量转换效率较低.而芳香性溶剂有利于MEH-PPV与EP-PTC的相容,MEH-PPV与EP-PTC两相间能形成纳米尺度的相分离,因此MEH-PPV与EP-PTC两相间的界面面积明显增加,界面处的电荷分离概率明显提高.与非芳香性溶剂相比,基于芳香性溶剂的复合膜太阳电池的能量转换效率提高了20倍.     

MXene与溶剂界面电子振动耦合现象的直接观测

作为一种新型的二维材料,MXene凭借其各种优异的物理化学性质已受到极为广泛的关注,例如其具有极其出色的光热转换效率. 然而,人们对MXene的光热转换机制仍然知之甚少. 本文通过结合飞秒可见和中红外瞬态吸收光谱技术,对分散在各种溶剂中MXene(Ti₃C₂T_x)纳米片内的电子能量耗散动力学进行了系统的研究. 结果表明,MXene的激发态寿命在很大程度上取决于周围的溶剂环境. 在MXene被超快激光泵浦后,可以直接观察到MXene纳米片与相邻溶剂分子之间的界面电子振动耦合现象. 这些结果表明界面相互作用在MXene的超快能量传输动力学中起着关键的作用. 这一发现可为二维体系光转换性能的改进提供了一条潜在可行的途径.     

Analysis of the generation mechanism of the S-shaped J—V curves of MoS2/Si-based solar cells

Amorphous-microcrystalline MoS$_{2}$ thin films are fabricated using the sol-gel method to produce MoS$_{2}$/Si-based solar cells. The generation mechanisms of the S-shaped current density-voltage ($J$-$V$) curves of the solar cells are analyzed. To improve the performance of the solar cells and address the problem of the S-shaped $J$-$V$ curve, a MoS$_{2}$ film and a p$^+$ layer are introduced into the front and back interfaces of the solar cell, respectively, which leads to the formation of a p-n junction between the p-Si and the MoS$_{2}$ film as well as ohmic contacts between the MoS$_{2}$ film and the ITO, improving the S-shaped $J$-$V$ curve. As a result of the high doping characteristics and the high work function of the p$^+$ layer, a high-low junction is formed between the p$^+$ and p layers along with ohmic contacts between the p$^+$ layer and the Ag electrode. Consequently, the S-shaped $J$-$V$ curve is eliminated, and a significantly higher current density is achieved at a high voltage. The device exhibits ideal p-n junction rectification characteristics and achieves a high power-conversion efficiency (CE) of 7.55%. The findings of this study may improve the application of MoS$_{2}$ thin films in silicon-based solar cells, which are expected to be widely used in various silicon-based electronic and optical devices.     

Asymmetric conductivity of the Kondo effect in cold atomic systems

Motivated by recent theoretical and experimental advances in quantum simulations using alkaline earth(AE)atoms,we put forward a proposal to detect the Kondo physics in a cold atomic system.It has been demonstrated that the intrinsic spin-exchange interaction in AE atoms can be significantly enhanced near a confinement-induced resonance(CIR),which facilitates the simulation of Kondo physics.Since the Kondo effect appears only for antiferromagnetic coupling,we find that the conductivity of such system exhibits an asymmetry across a resonance of spin-exchange interaction.The asymmetric conductivity can serve as the smoking gun evidence for Kondo physics in the cold atom context.When an extra magnetic field ramps up,the spin-exchange process near Fermi surface is suppressed by Zee-man energy and the conductivity becomes more and more symmetric.Our results can be verified in the current experimental setup.