Chemical maps of patterned samples by microline‐imaging laser‐induced plasma spectrometry

The potential of a microline‐imaging laser‐induced plasma spectrometry (LIPS) system for surface and depth analysis of heterogeneous solid samples in air at atmospheric pressure has been demonstrated. A pulsed Nd : YAG laser beam operating at 532 nm, with a homogeneous energy distribution (flat top laser), was used to generate a microline plasma on the sample surface. Subsequent light from the microline plasma was resolved spectrally and spatially and detected with an imaging spectrograph and an intensified charged‐coupled device detector. A patterned metal sample was chosen as the most appropriate for this study. Three‐dimensional chemical maps of Ni and Cu from the edge connectors of a printed circuit board have been obtained. With this experimental configuration, the lateral resolution (limited by crater width) was 42 µm and the spatial resolution along the spectrometer slit was 17.4 µm. The results illustrate the capability of microline imaging for fast mapping of large‐area samples and for depth profiling purposes. Copyright © 2003 John Wiley & Sons, Ltd.     

直流放电制备CN自由基及其LIF探测

CN自由基是研究化学反应动力学的典型自由基，CN的动力学行为，如CN＋O2的反应已成为研究自由基－自由基反应的模型体系[1]，同时也在许多实际过程如燃烧过程，星际气体的形成过程中起着重要的作用[2，3]．利用含有CN的化合物进行光解、放电、与亚稳态原子分子进行传能反应是目     

Improving the properties of the proton exchange membranes by introducing α-methylstyrene in the pre-irradiation induced graft polymerization

New proton exchange membranes (PEMs) were prepared by pre-irradiation induced grafting of α-methylstyrene (AMS)/styrene (STY)/divinylbenzene (DVB) into the crosslinked polytetrafluoroethylene (RX-PTFE) films and successively sulfonated. The new PEMs showed the improved glass transition temperature and chemical stability as compared with the PEMs prepared by pre-irradiation induced grafting of STY/DVB. The balance of the cost, grafting kinetic, thermal properties and the properties of the resulted proton exchange membrane is the key point of this work.     

Conformation and internal mobility of 5H-dibenzo[a,d]cycloheptene derivatives in solution. Conformational analysis of highly flexible structures,part II

Summary The conformational possibilities of 5-(3-N,N-dimethylaminopropyl)-5H-dibenzo[a,d]cycloheptene (1), 5-(3-N,N-dimethylaminopropylidene)-10,11-dihydro-5H-dibenzo[a,d]cycloheptene (2), and 5-(3-N,N-dimethylaminopropyl)-10,11-dihydro-5H-dibenzo[a,d]cycloheptene (3) are analysed using empirical force field methods. Minimum energy conformations, interconversion pathways, interconversion graphs and interconversion energies are examined in view of the analysis of conformer equilibria of1,2, or3 in solution. In addition, some basic requirements of the analysis of fast interconverting conformers using the lanthanide induced shift method are discussed.

---

Konformation und interne Beweglichkeit von 5H-Dibenzo[a,d]cyclohepten Derivaten in Lösung. Konformationsanalyse hochflexibler Strukturen, Teil 2

Zusammenfassung Die konformativen Möglichkeiten von 5-(3-N,N-dimethylaminopropyl)-5H-dibenzo[a,d]cyclohepten (1), 5-(3-N,N-dimethylaminopropylidene)-10,11-dihydro-5H-dibenzo[a,d]cyclohepten (2) und 5-(3-N,N-dimethylaminopropyl)-10,11-dihydro-5H-dibenzo[a,d]cyclohepten (3) wurden mit Hilfe empirischer Kraftfeldmethoden analysiert. Jene Konformationen, die einem energetischen Minimum entsprechen, sowie Interkonversionswege, Interkonversionsgraphen und Interkonversionsenergien wurden in Hinblick auf die Analyse der Konformerengleichgewichte von1,2 oder3 in Lösung untersucht. Weiters werden noch einige grundlegende Voraussetzungen für die Analyse von sich schnell ineinander umwandelnden Konformeren mittels der Lanthaniden-induzierten Verschiebungsmethode besprochen.

     

重氮树脂-聚(4-羧酸苯基)乙炔自组装膜与光电转换

近年来 ,自组装及其形成的多层复合膜已经在导电、生物传感器及非线性光学等领域得到深入研究 ,特别是以聚阴离子与聚阳离子相互作用的静电自组装研究更为深入 .这一技术制备方法简单 ,无需特别的设备 ,对膜层厚度能随意调控 ,并以水作为介质 ,对环境无害 [1～ 3] .共轭高分子 (如聚苯胺、聚吡咯及聚苯亚乙烯等 )通过自组装形成共轭高分子膜 ,对制备具有导电、光电和传输等功能的薄膜半导体器件具有重要意义 .聚乙炔类是最早被发现且理论与应用研究最多的一类共轭高分子材料[4 ,5] .本文以聚 ( 4 -羧酸苯基 )乙炔 ( PCPA)为聚阴离子 ,以重…     

Shape analysis based critical Eotvos numbers for buoyancy induced partial detachment of oil drops from hydrophilic surfaces

Removal of oil drops from solid surfaces immersed in an aqueous medium is of interest in many applications. It has been shown that drop shape analysis can be used to predict conditions at which the stability limit of a lighter than water oil drop on a solid surface immersed in an aqueous bath is reached (Adv. Colloid Interface Sci. 98 (2002) 265). However the above analysis is restricted to cases where the contact angle made by the drop is below 90degrees and when the surface conditions result in a 'pinned' contact line. In this paper, it is shown that drop shape analysis can be used to predict the critical conditions at which drop stability limit is reached for drop contact angles of 90degrees and above, which is encountered with 'hydrophilic' surfaces. This critical condition can predict the occurrence of partial oil drop detachment, before complete removal due to 'roll-up', which occurs when the hydrophilic surface is adequately smooth which prevents 'pinning' of the contact line. The critical conditions at which partial drop detachment occurs can also be approximately predicted from simple force balances. It has been shown (Adv. Colloid Interface Sci. 98 (2002) 265) that for contact angles less than 90degrees, the critical limit based on shape analysis appears to resolve the differences that arise due to alternate expressions for capillary retention force. This paper shows that even for contact angles above 90degrees, the critical conditions predicted from the shape analysis resolves the differences in the predictions from the alternate force balances. Drop shape analysis used in this paper is based on the 'Arc-length' form of Young-Laplace or 'drop shape' equation, which is different from the 'Y vs X' form of the above equation that is used in Adv. Colloid Interface Sci. 98 (2002) 265. The above drop shape equation is solved by a fourth order Runge-Kutta technique and it is shown that for angles less than 90degrees, the two forms of the drop shape equation, predict almost identical values of the critical Eotvos number. This paper highlights the competing effects of interfacial tension lowering induced drop instability and 'roll-up', a term that is used to describe the retraction of the contact line of an oil drop on a surface, in being the primary c ause for drop detachment.     

Mass shifting roles of negative kernel mass in density estimation

f(x) is a univariate density in C ⁴ with bounded support. For any n and sufficiently small kernel bandwidths, the symmetric appendage of any negative mass, –U, to any smooth unimodal symmetric kernel of order p=2 shifts expected estimator mass from regions where f(x)>0 to regions where f(x)<0. For large n, the mean automatic kernel adaptation induced by –U is analyzed in the simplest MISE reduction scenario: The symmetric appendage of –U to the uniform kernel K(x, X) over MISE-optimal bandwidths reduces MISE by shifting K(x, X) mass asymmetrically across the observation X in the direction of decreasing |f(x)|.     

黑腔靶X光转换,输运的定量测量

为了测量黑腔靶X光引光效率、转换效率,我们设计了相应的分解靶(泄漏靶)实验,1989～1992年在″神光″装置上共进行了四次漏靶分解实验,利用灵敏度作了绝对标定的平响应X光二极管对漏靶注入孔、引光孔流出的X光角分布进行了测量,测出了x光角分布,得到了黑腔靶X光转换效率为50％～60％,引光效率约6％,为以后辐射驱动内爆研究的理论计算和靶的优化设计提供了重要的数据。     

Large-scale synthesis of tube-like ZnS and cable-like ZnS-ZnO arrays: Preparation through the sulfuration conversion from ZnO arrays via a simple chemical solution route

Arrayed structures are desirable for many applications, but the fabrication of many material arrays remains a significant challenge. As a prominent II-VI semiconductor, large-scale arrayed ZnS structure has not been easily fabricated. Here, we introduce a simple structure conversion route for the synthesis of novel arrayed structures, and large-scale tube-like ZnS structure arrays and cable-like ZnS-ZnO composite arrays were successfully prepared through sulfuration conversion from arrayed rod-like ZnO structure based on a hydrothermal method at low temperature. XRD, EDS, SEM, TEM and PL are used to confirm the formation of the novel arrayed structure and trace the conversion process. The results show that the conversion ratio can be conveniently tailored by the reaction time, and the PL properties of the obtained materials can be adjusted through the conversion ratio. Especially, the cable-like structure holds the PL properties of both ZnO and ZnS structures. This simple solution method can be further extended to the preparation of other semiconductor sulfide and selenide, and can amplify the application field of large-scale arrays of semiconductors.     

微波等离子体光谱法测定碲的研究

微波等离子体原子发射光谱法(MIPAES)测定碲,前人已作过一些工作。本文利用我们建立的微量进样系统与MIPAES联用,对碲的测定进行了研究。实验中发现,加入适量的SnCl_2可降低检出限约一个数量级,Te_(214.3nm)的检出限为5 ng/mL,同时还研究了碱金属卤化物对碲的测定的影响。