大气环境下飞秒激光对铝靶烧蚀过程的研究

利用时间分辨的光阴影成像技术研究了在大气环境下飞秒激光烧蚀铝靶的动态过程. 在入射激光能量为4 mJ, 激光光斑超过1 mm时, 激光烧蚀区表面物质以近似平面冲击波形式向外喷射; 在同样激光能量下、激光光斑较小时(约0.6 mm), 激光烧蚀区以近似半球型冲击波形式向外喷射. 当激光能量比较大时(7 mJ), 发现空气的电离对于激光烧蚀靶材有着重要影响. 在光轴附近烧蚀产生的喷射物具有额外的柱状和半圆型的结构, 叠加在平面冲击波结构上.     

Removal of low-concentration benzene in indoor air with plasma-MnO2 catalysis system

Non-thermal plasma (NTP) and combined plasma-MnO₂ catalytic (CPMC) air cleaners were tested for removal of low-concentration benzene in air. Both air cleaners were made of stainless steel needle matrix plate and used DC corona discharger. The effects of discharge power and relative humidity (RH) on benzene removal efficiency were investigated in a closed chamber. The intermediate products produced in purification processes were analyzed using gas chromatography-mass spectrometer (GC-MS). The concentrations of discharge byproducts and CO₂ selectivity produced in both processes were also compared. It was found that the benzene removal efficiency increased with discharge power in both systems; With the increase of RH in air, benzene removal efficiency firstly increased and then decreased in NTP while it gradually decreased in CPMC. For a fixed discharge power of 9 W and RH of 20% in CPMC, the conversion of benzene increased from 82.9% to 89.6%, the CO₂ selectivity increased from 38% to 80%, the concentration of O₃ decreased from 25.3 ppm to 1.3 ppm, and NO₂ formation decreased from 234 ppm to 25.7 ppm, compared with NTP.     

室内空气中甲醛浓度的测定

目的为了快速准确的测定高校室内空气中甲醛浓度。方法采用乙酰丙酮分光光度法,对计算机房、物理实验室、化学实验室三个房间的甲醛浓度进行了测定分析。结果相对于化学实验室来说,计算机房的甲醛浓度多了0.77倍;物理实验室的甲醛浓度比化学实验室的多了0.98倍。结论室内空气质量可能会受新房对甲醛的释放时间以及室内新家具的存放时间影响;乙酰丙酮分光光度法具有简便、易控制、成本低等优点,可以广泛使用于普通室内甲醛浓度的测定。     

湿式氧化用于染料废水脱色:过去20年回顾（英文）

Wet air oxidation(WAO), a liquid phase reaction between organic materials in water and oxygen, is one of the most economical and technologically viable advanced oxidation processes for wastewater treatment, particularly toxic and high organic content wastewater. WAO is the liquid phase oxidation of organics or oxidizable inorganic components at elevated temperatures(125–320 °C) and pressures(0.5–20 MPa) using gaseous oxygen(or air) as oxidant. In the past two decades, the WAO process was widely studied and applied in the treatment of dye wastewater. Compared to conventional WAO, catalytic WAO processes have higher efficiency and use moderate reaction conditions. The catalysts included homogenous and heterogeneous types. The key points that need to be solved are recycling of homogenous catalysts and better stability of heterogeneous catalysts. In the present review, the technological processes are first introduced, then some research history and hotspots of WAO research are presented, and finally, its application in the treatment of dye wastewater in the past two decades is summarized to reveal the impressive changes in modes, trends, and conditions used. The application includes model pollutant studies and wastewater tests.     

Sorbents for the Direct Capture of CO2 from Ambient Air

The urgency to address global climate change induced by greenhouse gas emissions is increasing. In particular, the rise in atmospheric CO₂ levels is generating alarm. Technologies to remove CO₂ from ambient air, or “direct air capture” (DAC), have recently demonstrated that they can contribute to “negative carbon emission.” Recent advances in surface chemistry and material synthesis have resulted in new generations of CO₂ sorbents, which may drive the future of DAC and its large‐scale deployment. This Review describes major types of sorbents designed to capture CO₂ from ambient air and they are categorized by the sorption mechanism: physisorption, chemisorption, and moisture‐swing sorption.     

Unpaired 3d Electrons on Atomically Dispersed Cobalt Centres in Coordination Polymers Regulate both Oxygen Reduction Reaction (ORR) Activity and Selectivity for Use in Zinc–Air Batteries

Reversible oxygen conversion is important for various green energy technologies. Herein we synthesize a series of bimetallic coordination polymers by varying the Ni/Co ratio and using HITP (HITP=2,3,6,7,10,11‐hexaiminotriphenylene) as the ligand, to interrogate the role of metal centres in modulating the activity of the oxygen reduction reaction (ORR). Co₃HITP₂ and Ni₃HITP₂ are compared. Unpaired 3d electrons in Co₃HITP₂ result in less coplanarity but more radical character. Thus, despite of a reduced crystallinity and conductivity, the best ORR activity, comparable to 20 % Pt/C, is obtained for Co₃HITP₂, showing the 3d orbital configuration of the metal centre promotes ORR. Experimental and DFT studies show a transition of ORR pathway from four‐electron for Co₃HITP₂ to two‐electron for Ni₃HITP₂. Rechargeable zinc–air batteries using Co₃HITP₂ as the air cathode catalyst demonstrate excellent energy efficiency and stability.     

A Hydrolytically Stable Vanadium(IV) Metal–Organic Framework with Photocatalytic Bacteriostatic Activity for Autonomous Indoor Humidity Control

Metal–organic frameworks (MOFs) with long‐term stability and reversible high water uptake properties can be ideal candidates for water harvesting and indoor humidity control. Now, a mesoporous and highly stable MOF, BIT‐66 is presented that has indoor humidity control capability and a photocatalytic bacteriostatic effect. BIT‐66 (V₃(O)₃(H₂O)(BTB)₂), possesses prominent moisture tunability in the range of 45–60 % RH and a water uptake and working capacity of 71 and 55 wt %, respectively, showing good recyclability and excellent performance in water adsorption–desorption cycles. Importantly, this MOF demonstrates a unique photocatalytic bacteriostatic behavior under visible light, which can effectively ameliorate the bacteria and/or mold breeding problem in water adsorbing materials.     

Photo‐excited Oxygen Reduction and Oxygen Evolution Reactions Enable a High‐Performance Zn–Air Battery

The storage of solar energy in battery systems is pivotal for a sustainable society, which faces many challenges. Herein, a Zn–air battery is constructed with two cathodes of poly(1,4‐di(2‐thienyl))benzene (PDTB) and TiO₂ grown on carbon papers to sandwich a Zn anode. The PDTB cathode is illuminated in a discharging process, in which photoelectrons are excited into the conduction band of PDTB to promote oxygen reduction reaction (ORR) and raise the output voltage. In a reverse process, holes in the valence band of the illuminated TiO₂ cathode are driven for the oxygen evolution reaction (OER) by an applied voltage. A record‐high discharge voltage of 1.90 V and an unprecedented low charge voltage of 0.59 V are achieved in the photo‐involved Zn–air battery, regardless of the equilibrium voltage. This work offers an innovative pathway for photo‐energy utilization in rechargeable batteries.     

阻尼对空爆荷载等效静载动力系数的影响

为考查阻尼参数对空爆荷载等效静载动力系数的影响,理论推导了空爆荷载下结构等效单自由体系弹塑性位移解及延性比解,设计并计算了阻尼比0.000 1～0.1、延性比1～4的20种典型工况的动力系数,并与现行抗爆设计规范动力系数公式结果进行了对比。结果表明:阻尼比小于0.000 1时可基本代表无阻尼状态,阻尼比0.01的动力系数比无阻尼的最大降低幅度为2.08%,数值差异很小,因此阻尼比为0.01以内时,可忽略阻尼对动力系数的影响;阻尼比0.05的动力系数比无阻尼的降低幅度约9.92%,数值差异较大,认为阻尼比0.05以上时将具有明显的经济效益;现行设计规范动力系数更适用于柔性结构体系,运用于刚性结构抗爆设计时,计算误差较大,对阻尼比较小的结构设计更不利。     

激光大气等离子体的电子密度空间分布特性研究

利用Nd∶YAG激光器产生的1.06 μm激光束(脉冲能量为500 mJ,脉冲宽度为10 ns, 重复频率30 Hz)聚焦击穿大气形成长约为8 cm、最大直径为5 cm的激光大气等离子体柱,用光谱测量的方法,分别沿平行于激光束方向和垂直于激光束方向探测该等离子体柱的空间分辨光谱,并由此反演得出电子密度空间分布特性。实验结果表明,激光大气等离子体中各种离子和电子呈橄榄形分布,沿激光束方向不对称,而垂直激光束方向对称分布,最大电子密度为1018 cm-3。文章还探讨了激光大气等离子体中处在不同状态的各种原子、分子和离子在空间的分布特性,为进一步揭示激光大气等离子体的微观空间分布规律提供了实验依据。