Co_3O_4/BiOI复合催化剂的制备及其光催化性能

考察了两种方法制备的BiOI光催化剂,结果显示溶剂热法制备的BiOI比液相沉淀法制备的BiOI具有更好的光催化活性.然后,以溶剂热法制备的BiOI采用浸渍法制备了CoOx/BiOI复合催化剂,用X射线衍射(XRD)、紫外-可见(UV-vis)漫反射光谱、透射电子显微镜(TEM)等手段对其进行了表征,探讨了煅烧温度,煅烧时间以及Co掺杂量对其光催化性能的影响.结果显示:在300℃煅烧2h,Co的掺杂量为2.0%(Co/BiOI)的条件下,CoOx/BiOI复合物紫外光催化活性最高.结构研究表明,Co是以Co3O4的形式呈针状分布在团聚后的BiOI的表面,这有效地促进了BiOI的光催化性能.     

Photoelectrochemical Properties of Annealed Anodic TiO2 Layers Covered with CuOx

In this work, we present a systematic study on the influence of Cu²⁺ ion concentration in the impregnation solution on the morphology, structure, optical, semiconducting, and photoelectrochemical properties of anodic CuO_x-TiO₂ materials. Studied materials were prepared by immersion in solutions with different concentrations of (CH₃COO)₂Cu and subjected to air-annealing at 400 °C, 500 °C, or 600 °C for 2 h. The complex characterization of all studied samples was performed using scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), X-ray diffraction (XRD), reflectance measurements, Mott–Schottky analyses, and photocurrent measurements. It was found that band gap engineering based on coupling CuO with TiO₂ (E_g~3.3 eV) is an effective strategy to increase the absorption in visible light due to band gap narrowing (CuO_x-TiO₂ materials had E_g~2.4 eV). Although the photoactivity of CuO-TiO₂ materials decreased in the UV range due to the deposition of CuO on the TiO₂ surface, in the Vis range increased up to 600 nm at the same time.     

Thermal quenching of photoluminescence of Eu3+ ions in an Eu(fod)3 complex

We have studied the photoluminescence (PL) spectra of Eu³⁺ ions in the complex Eu(fod)₃ (fod = 6,6,7,7,8,8,8-heptafluoro-2,2-dimethyl-3,5-octadione) and also in polymers doped with Eu(fod)₃ with the help of supercritical carbon dioxide. We have established that in the temperature range 20°C–100°C, we observe thermal quenching of the photoluminescence of Eu³⁺ ions, and this quenching is most efficient in polycrystalline Eu(fod)₃ powder and Eu(fod)₃-doped polypropylene. __________ Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 73, No. 3, pp. 315–319, May–June, 2006.     

不同Pt-SnO2制备工艺对乙醇燃料电池性能影响

本文在石墨烯改性碳纤维的基础上,通过添加聚偏氟乙烯(PVDF)造孔、浸渍法、水热法制备出不同的Pt-SnO2/改性碳纤维阳极催化剂。以扫描电镜(SEM)、X射线衍射仪(XRD)、拉曼光谱图、电催化性能、单电池发电性能等手段来表征和测试,结果表明添加PVDF造孔后催化剂催化性能最好,峰电流密度可达137.33mA.cm-2,其电阻也明显减少,当制备成单电池时也具有最高功率密度,为22.89 mW.cm-2。     

Applicability of the Kissinger equation in thermal analysis

Pt/WO_x–ZrO₂ bifunctional catalysts were synthesized using impregnation and polymeric precursor methods. After the synthesis process the samples were calcined at 600, 700 and 800°C and characterized by X-ray diffraction, nitrogen adsorption and temperature programmed reduction study by thermogravimetry. DTG-TPR profiles showed between three and five reduction events at different temperatures attributed to platinum reduction and to different stages of tungsten species reduction. A comparative study of the synthesis method influence on the DTG-TPR curves was accomplished.     

高纯铜初始层裂的微损伤特性研究

本文对平面冲击加载下高纯铜初始层裂的微损伤特性进行了研究. 利用准三维的表面轮廓测试技术, 对冲击加载“软回收”的样品截面进行测试. 通过对测试数据的重构、量化和统计分析, 结果表明: 拉伸应力持续时间和加载应力幅值的增加, 都会加剧样品内部损伤局域化程度. 样品内损伤区域宽度是亚微米尺度的损伤演化的结果, 并且亚微米尺度的演化速率随着拉伸应变率的增加而单调递增. 通过统计获得了样品内微损伤的尺寸分布特征, 并分析了其与损伤演化进程的关联.     

介孔纳米 MoPO-AlPO4 的制备及其对异丁烯选择氧化的催化性能

 分别采用溶胶-凝胶法和等体积浸渍法制备了 MoPO-AlPO4 催化剂, 考察了钼物种存在状态对催化剂晶格氧活性以及异丁烯选择氧化反应性能的影响. N2 吸附-脱附、X 射线衍射、高分辨透射电镜、X 射线光电子能谱、傅里叶变换红外光谱、程序升温还原和微反实验结果表明, 与浸渍法制备的催化剂相比, 溶胶-凝胶法制备的 MoPO-AlPO4 催化剂为介孔纳米材料, 其比表面积和孔数量均有较大程度的提高. 在浸渍法制备的催化剂中, 钼物种以四面体 MoO42− 和八表面体 MoO66− 形式存在; 而在溶胶-凝胶法制备的催化剂中钼物种主要以四面体 MoO42− 的形式存在, 并有部分钼物种嵌入到了 AlPO4 骨架中. 钼物种的种类对异丁烯选择氧化反应的活性和选择性有较大影响, 溶胶-凝胶法制备的催化剂由于嵌入 AlPO4 骨架中钼物种的存在, 异丁烯选择氧化反应性能得到较大提高.     

Influence of preparation method on the structure and catalytic activity of supported solid sulfuric acid

Summary FT-IR and ²⁹Si-NMR studies suggested the interaction of H₂SO₄ with the SiO₂ support in the material synthesized by the sol-gel method. ¹H-NMR results showed that the acid strength of solid sulfuric acid was almost the same as that of liquid sulfuric acid. The catalyst showed higher catalytic activity and stability than that prepared by impregnation method.     

制备方法对Pt-Sn-K-Mg/γ-Al2O3催化剂正十二烷脱氢性能的影响

以正十二烷脱氢反应为探针反应,采用顺序浸渍、乙醇共浸渍、盐酸共浸渍的方法制备了Pt-Sn-K-Mg/γ-Al2O3催化剂,并采用NH3-TPD、CO脉冲吸附、H2-TPR、准原位XPS等表征手段探究浸渍顺序和溶剂对催化剂构效关系的影响。结果表明,盐酸水溶液共浸渍的方法制备的催化剂表现出了最佳的初始活性和较好的稳定性。催化剂的弱酸性位点的增加有利于Pt的分散,从而提高催化性能。采用乙醇为溶剂的共浸渍方法更有利于PtSn间形成更强的相互作用生成更多的PtSn合金,这对初始活性不利,但对选择性影响较小。     

Preparation of SiO2-TiO2 Aerogels Using Supercritical Impregnation

The preparation of SiO₂-TiO₂ aerogels by supercritical impregnation of titanium alkoxides into silica alcogels was investigated. A mixture of CO₂ and 2-propanol with dissolved titanium tetraisopropoxide modified with acetylacetone was used as the impregnation medium. Prior to the experiments, the supercritical behaviour of the impregnation solution was investigated. The microstructure and properties of aerogels prepared by the supercritical impregnation method were almost identical to those generated by the liquid impregnation. However, the time for impregnation was substantially decreased and the homogeneity of the impregnated titanium distribution on the aerogel increased.