基于在线HHT和SVM的汽油机轻微漏气故障识别方法

针对汽油机轻微漏气故障会被闭环反馈控制所掩盖,提出了一种基于在线希尔伯特变换(Hilbert-Huang Transform,HHT)和支持向量机(Support vector machine,SVM)的两阶段微小故障识别方法(Online HHT-SVM,OHS).第一阶段在嵌入式两滑动时间窗内通过HHT对发动机空燃比数据流进行在线时频分析,以实时获取空燃比发生异常的时刻;第二阶段通过SVM对异常时刻的数据流故障模式进行离线识别.根据氧传感器信号特征,对经验模态分解(Empirical mode decomposition,EMD)算法进行了改进,并从理论上进行了证明.基于两款发动机的实际运行数据验证了该方法的有效性.     

超声浸渍对费托合成Co/Zr/SiO2催化剂性能的影响

采用超声浸渍法制备了费托合成Co/Zr/SiO2催化剂,考察了超声波功率对催化剂费托反应性能的影响,并运用N2物理吸附、X射线衍射、H2程序升温脱附、H2程序升温还原和透射电子显微镜对催化剂进行了表征,结果表明,超声波处理可以增大催化剂的比表面积,减小金属Co的粒径,并使其较为均匀地分散于载体表面,其中以高功率超声波作...     

Permeability of Clustered Fiber Networks: Modeling of the Unit Cell

The paper is focused on estimating the permeability of a clustered fiber network by variational methods. First, a laminar flow in ducts is considered by using polynomial trial functions. Then, a longitudinal flow through a square array is described by expanding the flow-rate field in trigonometric and Laurent series. Finally, a formal scheme for estimating the longitudinal permeability in a cluster with an irregular distribution of fibers is given. The irregular distribution is modeled by setting an individual effective radius for each fiber and then letting this fiber reach its minimum gravitational energy. The results obtained here form a basis for future predictions of the permeability of fibrous reinforcements.     

（NH_4）_2MOS_4在活性炭上浸渍过程的研究Ⅰ．浸渍参数对（NH_4）_2

（ＮＨ＿４）＿２ＭＯＳ＿４在活性炭上浸渍过程的研究Ⅰ．浸渍参数对（ＮＨ＿４）＿２ＭＯＳ＿４在活性炭上分布的影响秦慧芳，张成芳，陆岗，俞丰，朱子彬（华东理工大学无机化工研究所，上海２００２３７）关键词硫代钼酸铵，浸渍，活性炭，钼分布负载型催化剂制备一般...     

Physicochemical and Quality Properties of Dried Courgette Slices: Impact of Vacuum Impregnation and Drying Methods

The aim of this study was to determine the effects that the type of impregnating solution and drying method (freeze drying (FD) and vacuum drying (VD) at 45 °C and convective drying (CD) at 50, 60, and 70 °C) had on the physicochemical and quality properties of courgettes. Courgette slices were vacuum-impregnated (6 kPa) in freshly squeezed onion, kale, and onion and kale (50:50) juices with 3% NaCl solution (N). The application of vacuum impregnation (VI) with impregnating solutions from freshly squeezed onions and kale had a beneficial effect on the bioactive values of courgette. The highest contents of quercetin (41.84 μg/g d.m.) and carotenoids (276.04 μg/g d.m.) were found in courgette impregnated with onion juice after freeze drying. The highest values of lutein and zeaxanthin (216.42 μg/g d.m.) were recorded for courgette impregnated with kale juice and convective dried. By analysing the kinetics of convective drying, the best matching of the logistic model was found. Increasing the drying process temperature from 50 to 70 °C reduced the drying time from 15% to 36%, depending on the type of impregnating solution used. Water activity < 0.6 was recorded for courgette dried by freezing, vacuum, and convection at 60 and 70 °C. Conclusions: The vacuum impregnation process and the impregnation solutions from freshly squeezed vegetables can be used to develop new snacks with high levels of bioactive compounds. The FD method is the most appropriate considering both the bioactive compounds content and the obtained colour and water activity.     

Synthesis of hybrid organic-inorganic perovskite platelets by vacuum impregnation

In perovskite solar cells and optoelectronics, perovskite film morphology controls the performance of the device. Various methods have been developed to control the morphology and coverage of the perovskite films. In this article platelet type perovskite morphlogy was synthesized using low temperature vacuum impregnation of the perovskite solution CH₃NH₃PbI₃ resulting in complete coverage on TiO₂ film. Vacuum impregnation synthesis of perovskites has the advantage of low cost and low temperature which faciliates application in flexible electronics and solar cells.     

高温超导无绝缘线圈励磁电压特性研究

本文通过实验研究了焊锡浸渍、励磁电流PI控制、励磁速率以及励磁幅值对高温超导无绝缘线圈励磁电压特性的影响。实验结果表明:高温超导无绝缘线圈励磁电压具有时延特性,焊锡浸渍、励磁电流PI控制分别会增大和减小时延特性,而励磁速率和励磁幅值不会影响时延特性;励磁电压幅值随励磁速率增大而增大;焊锡浸渍可降低励磁电压幅值,而励磁电流控制对励磁电压幅值影响不明显。     

负载型Pt/CeO_2-Al_2O_3催化剂的制备及其脱氢性能

通过超声辅助共沉淀法制备了具有高比表面积、大孔容和大孔径的CeO_2-Al_2O_3复合载体,并以此制备了一系列负载型Pt/CeO_2-Al_2O_3催化剂,采用XRD、氮吸附、NH3-TPD、SEM和TEM等方法对复合载体和催化剂进行了表征;以甲基环己烷为模型化合物,考察了Pt/CeO_2-Al_2O_3催化剂的脱氢性能,研究了载体中Ce/Al物质的量比及反应温度对其催化脱氢性能的影响。结果表明,当Ce/Al物质的量比为0.5时,Pt/CeO_2-Al_2O_3催化剂在450℃下具有较高的脱氢性能;甲基环己烷转化率达到88.53%,甲苯的选择性达94.63%。     

CO2／CH4重整镍基催化剂制备与性能的关系

一般浸渍法与真空浸渍法的比较说明,真空浸渍制备的催化剂,其表面具有较多的Ｎｉ原子,催化活性较高,现场ＴＰＯ实验表明,ＣＯ岐化的积炭量大于ＣＨ４解离的积炭量。从而提出镍基催化剂的积炭主要来自反应生成气ＣＯ的岐化。     

氧化钙和氟化钾负载高岭土固体碱催化制备新型生物柴油

以高岭土为载体,利用浸渍法制备了氧化钙和氟化钾负载高岭土固体碱(GCK);利用X射线粉末衍射(XRD)、扫描电子显微镜(SEM)、红外光谱(FT-IR)和哈密特指示剂法等技术手段对催化剂进行表征;考察了KF负载量和反应条件对月桂酸甲酯(ML)与乙二醇单甲醚(EGME)酯交换反应制备新型生物柴油产率的影响。 结果表明,GCK碱强度(H_)在7.2~18.4之间,KCaF₃为主要活性组分,当氟化钾负载量为25%、EGME与ML摩尔比3.0、催化剂用量相对于ML的质量分数为4.5 %、120 ℃下反应2 h,新型生物柴油的收率高达97.1%。 最后对催化剂的重复利用性能进行了考察。