在位分散聚合聚甲基丙烯酸甲酯/二氧化硅纳米复合材料研究

应用在位分散聚合方法制备了分散相粒径介于１３０ｎｍ左右的聚甲基丙烯酸甲酯／二氧化硅ＰＭＭＡ／ＳｉＯ２纳米复合材料，并利用ＳＥＭ，ＤＭＡ，ＴＧＡ等手段研究了该体系的性能．结果表明，经表面处理的ＳｉＯ２无机填料在复合材料基体中分散均匀，界面粘结好．ＳｉＯ２填充粒子的用量对基体的热稳定性，动态力学行为，光学行为以及拉伸强度，弹性模量，断裂伸长率等力学性能都有较大影响     

Hydrogen Oxidation on a Platinum Microelectrode: Effect of Carbon Monoxide Impurities

The kinetics of the hydrogen oxidation and the CO adsorption on a Pt (ultra)microelectrode is studied in a 0.5 M H₂SO₄ solution saturated with a mixture of gaseous H₂ and CO at partial CO pressures p _CO = 10–500 ppm. The balance between rates of diffusion and adsorption of CO at different adsorption times is studied. Studied is the effect of CO impurities in H₂ on steady-state polarization curves for the hydrogen ionization and nonsteady-state curves of the oxidation current decay with time at 0.02–0.05 V. Conditions under which in a certain time interval and at a certain CO concentration the slope of an I vs. t curve is proportional to p _CO are determined. The obtained dependence may be used when designing a technique for monitoring CO impurities in technical hydrogen.     

Feasibility of using solid sampling graphite furnace atomic absorption spectrometry for speciation analysis of volatile and non-volatile compounds of nickel and vanadium in crude oil

A method for the direct determination of volatile and non-volatile nickel and vanadium compounds in crude oil without previous treatment using direct solid sampling graphite furnace atomic absorption spectrometry is proposed. The crude oil samples were weighed directly onto solid sampling platforms using a microbalance and introduced into a transversely heated solid sampling graphite tube. In previous work of our group losses of volatile nickel and vanadium compounds have been detected, whereas other nickel and vanadium compounds were thermally stable up to 1300 and 1600 °C, respectively. In order to avoid this problem different chemical modifiers (conventional and permanent) have been investigated. With 400 μg of iridium as permanent modifier, the signal started to drop already after two atomization cycles, possibly because of an interaction of nickel (which is a catalyst poison) with iridium. Twenty micrograms of palladium applied in each determination was found to be optimum for both elements. The palladium was deposited on the platform and submitted to a drying step at 150 °C for 75 s. After that the sample was added onto the platform and submitted to the furnace program. The influence of sample mass on the linearity of the response and on potential measurement errors was also investigated using four samples with different nickel content. For the sample with the lowest nickel concentration the relationship between mass and integrated absorbance was found to be non-linear when a high sample mass was introduced. It was suspected that the modifier had not covered the entire platform surface, which resulted in analyte losses. This problem could be avoided by using 40 μL of 0.5 g L⁻¹ Pd with 0.05% Triton X-100. Calibration curves were established with and without modifier, with aqueous standards, oil-in-water emulsions and the certified reference material NIST SRM 1634c (trace metals in residual fuel oil). The sensitivity for aqueous standards and emulsions was close to that for SRM 1634c, making possible the use of aqueous standards for calibration. The limits of detection and quantification obtained for nickel and vanadium under this condition were found to be 0.02 and 0.06 μg g⁻¹, respectively, for both elements, based on 10 mg of sample. Nickel and vanadium were determined in the samples with (total Ni and V) and without the use of Pd (thermally stable compounds), and the concentration of volatile compounds was calculated by difference. The results were compared with those obtained by high-resolution continuum source graphite furnace atomic absorption spectrometry by emulsion technique; no significant differences were found for total Ni and V at the 95% confidence level according to a Student's t-test.     

氟化γ-Al2O3表面酸性的NMR和FTIR表征

用红外光谱和核磁共振技术研究了氟化作用对γ-Al2O3的表面酸性（酸中心类型、强度及数量）的影响。吡啶和二甲基吡啶在氟化γ-Al2O3（F／γ-Al2O3）表面上吸－脱附的IR光谱和三甲基膦在F／γ-Al2O3表面上吸附的^31P MAS NMR结果表明，F／γ-Al2O3表面上既存在Lewis酸位又存在Broensted酸位。L酸的总量随氟含量的增加而减少。但其强度随之增加，且同时产生几种新的L酸位。B酸的数量和强度在样品含氟量为2％－3％间存在极大值。研究还表明，三甲基膦是一种测量F／γ-Al2O3表面酸性的灵敏的NMR探针分子，^31P MAS NMR和红外光谱的测试结果基本一致。同时，对氟化过程中酸位形成和变化机理进行了探讨。     

Preparation of flame retardant polyamide 6 composite with melamine cyanurate nanoparticles in situ formed in extrusion process

This paper is focused on in situ preparation of melamine cyanurate (MCA) nanoparticles from reaction of melamine (MEL) and cyanuric acid (CA) and their flame retardant polyamide 6 (PA6) composite in the extrusion process through a novel reactive processing method. Fourier transform infrared (FT-IR), X-ray diffraction (XRD), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA) and scanning electron microscopy (SEM) were utilized to characterize the in situ formed MCA nanoparticles and their blends with PA6. Introduction of pentaerythritol (LTP) and water-bound plasticizer dioctyl phthalate (DPT) into the extrusion reaction system greatly inhibits the evaporation of water required for melamine and cyanuric acid reaction at high temperature (higher than 180 °C), laying a foundation for successful in situ preparation of MCA through reactive processing. XRD and FT-IR measurements indicate that under the effect of pentaerythritol, dioctyl phthalate and water, melamine really reacts with cyanuric acid to in situ form MCA in extrusion process. The reaction degree is close to 100%. A very important finding through SEM is that the in situ formed MCA particles, which were found to have aspect ratio of about 7.5, radial size in the range of 70-300 nm (mostly 70-90 nm) and crystallite size of less than 22 nm, are uniformly dispersed in the matrix PA6 at nanoscale. The in situ formed MCA nanoparticles greatly improve the flame retardancy and the mechanical properties of flame-retarded PA6 materials, and the introduced plasticizer dioctyl phthalate also ameliorates the related impact property. The obtained flame-retarded PA6 materials have good comprehensive performance with flame retardancy UL-94 V-0 rating at 1.6 and 3.2 mm thickness, tensile strength 48.0 MPa, elongation at break 106.3% and Izod notched impact strength 8.92 kJ/m². Compared with flame-retarded PA6 material with in situ formed MCA, the one prepared through conventional blending of PA6 with commercial MCA product has improved tensile strength but deteriorated impact strength and flame retardancy.     

Structure of thiocyanate adlayers on Rh(111): an in situ STM study

In situ scanning tunneling microscopy (STM) was used to examine the structure of thiocyanate adlayers specifically adsorbed on Rh(111) in solutions of potassium hydroxide and perchloric acid, both containing potassium thiocyanate (KSCN). An atomically flat terrace-step structure was consistently observed on Rh(111) surfaces prepared by the flame-annealing-quenching method. The Rh(111)-(1 × 1) atomic structure was discerned on the atomically flat terrace even in the alkaline solution. High-resolution STM images disclosed two different structures of the SCN⁻ adlayers, () and (2 × 2), in the alkaline and the acidic media, respectively. In each structure, an individual adsorbed SCN⁻ ion appeared as a single spot with a constant corrugation height in STM images, suggesting that SCN⁻ ions adsorbed predominantly with their S-ends at particular bonding sites on Rh(111). The difference in the adlayer structure in the two solutions can be attributed to the interaction between adsorbed SCN⁻ and coadsorbed K⁺ in the alkaline solution, and is different from that between adsorbed SCN⁻ and H⁺ in the acidic solution. Received: 26 February 1997 / Accepted: 3 March 1997     

Impact of electron-electron interaction on the electron energy distribution function in molecular plasmas under rf field action

Calculations of the electron energy distribution and of relevant macroscopic quantities of collision-dominated, weakly ionized plasmas under rf field action have been performed with increasing degrees of ionization, and the impact of the electron-electron interaction on these quantities was determined. The investigations were performed for the gas plasmas in CO and H₂ as representatives of molecular plasmas The energy distribution and macroscopic quantities are obtained by solving the nonstationary Bolizmann equation for a given rf field and degree of ionization taking into accoung and additional Fokker-Planck term besides the collision integrals for the elastic and the main inelastic collision processes. In these molecular plasmas a remarkable impact of the electron-electron interaction connected with increasing Maxwellization is observed for degrees of ionization greater than 10.     

蒿甲醚在模拟体内酸碱环境中的代谢动力学研究

 利用高效液相法对蒿甲醚进行了模拟体内酸碱环境的代谢动力学研究 ,测定了蒿甲醚及其代谢产物双氢青蒿素、蒿甲醚呋喃酯的代谢曲线。结果表明 ,蒿甲醚在模拟体内肠道和血液的弱碱性环境条件下半衰期为2 87 2min(计算值 ) ;在模拟体内胃液的酸性环境条件下半衰期为 74 6min ;在两种条件下的主要代谢产物均为双氢青蒿素和蒿甲醚呋喃酯。该方法克服了以往文献所报道方法的一些缺点 ,不仅简化了样品制备方法 ,也提高了检测结果的准确性。     

Determination of Organophosphorus Pesticides in Soil by MMSPD-GC-NPD and Confirmation by GC-MS

A novel method, modified matrix solid-phase dispersion (MMSPD), has been developed for quantitative analysis of organophosphorus pesticide residues in soil. It was based on matrix solid-phase dispersion (MSPD) and continuous liquid-solid extraction (continuous LSE), using Florisil as sorbent and dichloromethane as the recycling solvent. Two soils with different texture and physicochemical properties were studied to validate the method. The effect of residence time of pesticides in soil was also studied. MMSPD was compared with MSPD and continuous LSE respectively. Determination was carried out by gas chromatography with nitrogen-phosphorus detection (GC-NPD). The method gave recoveries ranging from 72–105% with relative standard deviations (RSDs) lower than 15% for the pesticides studied. The limits of detection (LODs) ranged from 0.1 to 0.6 ng g⁻¹. Two pesticide residues have been detected in real soil samples from Fujian, China, using MMSPD. The pesticides were confirmed by gas chromatography-mass spectrometry (GC-MS) in a selected-ion monitoring (SIM) mode. Revised: 4 and 9 April 2006