Synthesis and Characterization of Metabolites and Potential Impurities of Lansoprazole,an Antiulcerative Drug

Lansoprazole (Prevacid) is an antiulcerative drug used for the treatment of duodenal and gastric ulcers, reflux oesophagitis, and Zollinger–Ellison syndrome. During the bulk synthesis of lansoprazole, we have observed five impurities: lansoprazole N-oxide, lansoprazole sulfone N-oxide, lansoprazole sulfide, lansoprazole sulfone and N-aralkyl lansoprazole. The present work describes the synthesis and characterization of these impurities.     

Development of multi-elemental method for quality control of parenteral component solutions using ICP-MS

An inductively coupled plasma mass spectrometry (ICP-MS) method for elemental impurities determination in components used for parenteral nutrition solutions is proposed. Solutions of amino acids (10% m/v), glucose (50% m/v) and lipids (20% m/v) were analyzed. Arsenic, Cd, Cu, Pb and Mo were determined by ICP-MS operated at standard mode, whilst pneumatic nebulization was used for introducing the sample solution into the ICP. Mercury was determined using cold vapor generation (CVG) coupled to ICP-MS. Chromium, Mn, Ni and V were determined by means of dynamic reaction cell-inductively coupled plasma mass spectrometry (DRC-ICP-MS), while ammonia was used as reaction gas. The operational conditions of each technique were optimized in order to achieve better sensitivity, precision and accuracy. The influence of the sample matrix, mainly carbon, on all investigated elements was evaluated. The use of DRC was effective to reduce interferences on Cr, Mn, Ni and V determination. The other investigated elements (As, Cd, Cu, Pb, Mo and Hg) were determined directly in the samples, which were properly diluted. Results obtained were in good agreement (between 96 and 103%) with certified values (certified reference materials of water were analyzed), at the same time as the relative standard deviation was lower than 5%. Sample throughput was relatively high (up to 30 samples of components used for parenteral nutrition solution could be analyzed per hour). In this way, the proposed method can be recommended for routine analysis.     

Signal transducers and enzyme cofactors are susceptible to oxidation by nanographite impurities in carbon nanotube materials

Carbon nanotubes (CNTs) are often employed in biofuel cells, artificial photosystems and bioelectronics in order to enhance electron transfer and to efficiently shuttle electrons between redox active molecules and the electrode surface. However, it should be noted that typical CNTs are highly heterogeneous materials, containing large amounts of impurities. Herein, we report the influence of nanographite impurities contained within CNTs upon the redox properties of signal transducers and enzyme cofactors that are vital for the functioning of biofuel cells, artificial leaves and bioelectronics as well as for the survival of living organisms. We investigate the susceptibility of tyrosine and tryptophan, amino acids involved in electron transfer and biorecognition reactions as well in the synthesis of neurotransmitters, in addition we also consider the susceptibility of the principal electron carrier β-nicotinamide adenine dinucleotide. We conclude that nanographite impurities within CNTs are responsible for the "electrocatalytic" oxidation of NADH and two amino acids involved in signal transduction, tyrosine and tryptophan. Our findings are of high importance for both industrial and biomedical applications.     

电感耦合等离子体质谱法测定高纯钼中12种杂质元素

采用反应池技术消除了复合离子对Ca、Fe和Si等元素的干扰,以内标校正法直接测定了其它9种元素。优化选择了测定同位素和内标元素,考察了基体效应对测定结果的影响,建立了电感耦合等离子体质谱测定了高纯钼中12种杂质元素含量的方法。方法测定下限介于0.10～0.37μg/g之间,加标回收率为93％～105％,RSD＜10％。...     

Phase diagram of Ge:(C,Sn)

We present the self-assembling conditions of 1C4Sn tetrahedral nanoclusters with carbon atoms in their centers in Ge:(C, Sn) in the wide temperature range as a function of the impurity contents and temperature. These conditions are the phase diagram of Ge:(C, Sn) since nanocluster occurrence and completion of self-assembling when all carbon atoms are in nanoclusters are results of the continuous phase transitions. The significant decrease of the strain energy after formation of nanoclusters is a cause of self-assembling. It is shown that the nanocluster occurrence temperature depends only on the Sn content. The impurity content conditions when all carbon atoms are in 1C4Sn nanoclusters are obtained for the temperatures up to 855 ^°C.     

辉光放电质谱法测定核级石墨粉中痕量杂质

建立了直流辉光放电质谱法(DC-GDMS)测定核级石墨粉中痕量杂质元素的方法。用一定的压力将石墨粉镶嵌在高纯铟片上,形成一个直径约为5 mm的圆形石墨薄层,用铟片辅助石墨粉放电,实现了粉状样品直接检测。优化的实验条件为放电电流0.8 mA,放电电压1.2 kV,放电气体流速0.437 mL/min。用石墨粉标准样品(19J T61029)单点校准了仪器相对灵敏度因子,消除基体效应,实现15个关键杂质元素定量分析。方法检出限为5.0 ng/g,在单侧0.05显著性水平下,利用Student’s t检验,方法测定结果 t值均小于临界值,与标准值无显著性差异。相对标准偏差(RSD)均小于10%。本方法与电感耦合等离子体光谱法测定结果比较,相对误差在2.4%～17.4%之间。     

杂质对KDP晶体光学质量的影响

研究了几类可能出现在KDP晶体的生长溶液中的有机物杂质和无机阴离子杂质基团对KDP晶体散射、透过率、光损伤阈值等光学质量的影响,结果表明,不同种类的杂质的影响并不相同,造成这一结果的根本原因在于杂质离子的结构及其与晶体表面原子成键能力的不同。     

KDP晶体的杂质与光学性能分析

测量常规方法与快速方法生长的非线性光学KDP晶体紫外及近红外波段透射光谱性能,并测定了晶体不同生长区域杂质的含量,通过对实验结果的分析比较讨论了影响晶体紫外透过性能的因素;采用多脉冲平均方式测量了不同方法生长晶体在1 064nm及532 nm皮秒激光脉冲作用下的晶体损伤阈值,晶体的体吸收系数与晶体抗损伤能力的对应关系表明晶体内部的杂质与缺陷存在着明显的光吸收, 从而降低了晶体对高能量脉冲的负载能力。     

Ultra-high-speed liquid chromatography combined with mass spectrometry detection analytical methods for the determination of nitrosamine drug substance-related impurities

In the present study, five simple, feasible, and sensitive Ultra-high-speed liquid chromatography combined with mass spectrometry detection methods, using electrospray ionization are proposed. These methods were developed and validated for the determination of four different nitrosamine drug substance-related impurities—N-nitrosoacebutolol, N-nitrosobisoprolol, N-nitrosometoprolol, and N-nitrososotalol—in five beta blockers active pharmaceutical ingredients—acebutolol HCl, bisoprolol fumarate, metoprolol tartrate, metoprolol succinate, and sotalol HCl. The proposed methods were validated as per regulatory guidelines. Acquity HSS T3 (3.0 × 100 mm, 1.8 μm) column and formic acid 0.1% in water combined with methanol or acetonitrile were used for chromatographic separation in all methods. The limit of detection and the limit of quantification were found to be in the range of 0.02–1.2 and 2–20 parts per billion, respectively. The accuracy and precision of the five methods have been demonstrated in the working range of each one, giving values of recovery within the range of 64.1%–113.3%, and the regression coefficients (R) were found to be in the range of 0.9978–0.9999. These methods could be used for controlling nitrosamine drug substance-related impurities content for beta blockers drug substances batches manufactured at Moehs group.