Chemoenzymatic epoxidation of alkenes based on peracid formation by a Rhizomucor miehei lipase-catalyzed perhydrolysis reaction

A chemoenzymatic and selective method for the epoxidation of a series of cyclic and linear alkenes is described. Epoxides have been obtained in moderate to excellent conversions under mild reaction conditions through a two-step sequence, carried out in one-pot. This chemoenzymatic approach is based on a Rhizomucor miehei lipase-catalyzed perhydrolysis reaction to form the corresponding peracid, and subsequent epoxidation of the corresponding alkenes. Reaction parameters with influence in the biotransformation have been optimized specially focusing in the efficient enzymatic peracid formation by means of the correct choice of solvent, oxidant, and peracid precursor. This chemoenzymatic approach has been efficiently applied for the first time, in the regioselective chemical oxidation of (S)-carvone and limonene, both showing an opposite behavior for the oxidation of the internal and external C–C double bond, respectively.     

An ultra-fast and highly efficient multiple proteases digestion strategy using graphene-oxide-based immobilized protease reagents

Highly efficient and rapid proteolytic digestion of proteins into peptides is a crucial step in shotgun-based proteome-analysis strategy.Tandem digestion by two or more proteases is demonstrated to be helpful for increasing digestion efficiency and decreasing missed cleavages,which results in more peptides that are compatible with mass-spectrometry analysis.Compared to conventional solution digestion,immobilized protease digestion has the obvious advantages of short digestion time,no self-proteolysis,and reusability.We proposed a multiple-immobilized proteases-digestion strategy that combines the advantages of the two digestion strategies mentioned above.Graphene-oxide(GO)-based immobilized trypsin and endoproteinase Glu-C were prepared by covalently attaching them onto the GO surface.The prepared GO-trypsin and GO-Glu-C were successfully applied in standard protein digestion and multiple immobilized proteases digestion of total proteins of Thermoanaerobacter tengcongensis.Compared to 12-hour solution digestion using trypsin or Glu-C,14%and 7%improvement were obtained,respectively,in the sequence coverage of BSA by one-minute digestion using GO-trypsin and GO-Glu-C.Multiple immobilized-proteases digestion of the total proteins of Thermoanaerobacter tengcongensis showed 24.3%and 48.7%enhancement in the numbers of identified proteins than was obtained using GO-trypsin or GO-Glu-C alone.The ultra-fast and highly efficient digestion can be contributed to the high loading capacity of protease on GO,which leads to fewer missed cleavages and more complete digestion.As a result,improved protein identification and sequence coverage can be expected.     

Chemoenzymatic synthesis of deoxy analogues of the DNA topoisomerase II inhibitor eleutherin and the 3C-protease inhibitor thysanone

The asymmetric synthesis of (−)-9-demethoxyeleutherin 6, (+)-9-demethoxyeleutherin 7 and (+)-7,9-deoxythysanone 8 has been achieved using a microwave assisted kinetic resolution of racemic alcohol 11 with Novozyme 435^® as the key step.     

Covalent attachment of Candida rugosa lipase on chemically modified hybrid matrix of polysiloxane-polyvinyl alcohol with different activating compounds

Candida rugosa lipase was immobilized by covalent binding on hybrid matrix of polysiloxane–polyvinyl alcohol chemically modified with different activating agents as glutaraldehyde, sodium metaperiodate and carbonyldiimidazole. The experimental results suggested that functional activating agents render different interactions between enzyme and support, producing consequently alterations in the optimal reaction conditions. Properties of the immobilized systems were assessed and their performance on hydrolytic and synthetic reactions were evaluated and compared with the free enzyme. In hydrolytic reactions using p-nitrophenyl palmitate as substrate all immobilized systems showed higher thermal stability and optima pH and temperature values in relation to the free lipase. Among the activating compounds, carbonyldiimidazole resulted in a total recovery of activity on the support and the highest thermal stability. For the butyl butyrate synthesis, the best performance (molar conversion of 95% and volumetric productivity of 2.33 g L⁻¹ h⁻¹) was attained with the lipase immobilized on POS–PVA activated with sodium metaperiodate. The properties of the support and immobilized derivatives were also evaluated by scanning electron microscopy (SEM), energy dispersive X-ray spectroscopies and chemical composition (FTIR).     

Determination of lipoprotein lipase activity in post heparin plasma of streptozotocin-induced diabetic rats by high-performance liquid chromatography with fluorescence detection

The activity of lipoprotein lipase (LPL), an enzyme responsible for lipoprotein metabolism, would vary in diseases and metabolic disorders. For determination of LPL activity, a highly sensitive high performance liquid chromatography (HPLC) method using a fluorescent reagent, 4-nitro-7-piperazino-2,1,3-benzoxadiazole (NBD-PZ) was applied to determinate the oleic acid (OA) generated from triolein by LPL activity without multiple solvents extraction step. We studied the optimal conditions of the reaction including the effect of emulsifiers, deproteinizing solvents, and the concentration of bovine serum albumin (BSA). Ten millimolar concentrations of triolein, 5% of BSA, 1% of Gum arabic (GA), and acetonitrile showed the optimum conditions for measuring the LPL activity. The accuracy values for the determination of LPL activity in 10 microL of rat post heparin plasma were 108.73 approximately 114.36%, and the intra- and inter-day precision values were within 1.28% and 2.91%, respectively. The limit of detection was about 4.53 nM (signal-to-noise ratio 3). The proposed method was applied to determination of LPL activity in post heparin plasma of normal and streptozotocininduced diabetic rats associated with 52.3% reduction. The established assay system could be used for determining LPL activity in different physiological and pathological conditions to clarify the relationship between LPL activity and diabetes mellitus.     

Two Step Purification of <Emphasis Type="Italic">Acinetobacter</Emphasis> sp. Lipase and Its Evaluation as a Detergent Additive at Low Temperatures

Acinetobacter sp. lipase was purified to homogeneity by a two-step process. The crude enzyme (along with biomass) was subjected to partial purification by aqueous two phase system (ATPS), avoiding centrifugation and filtration steps. Conditions for lipase partitioning by ATPS were optimized by response surface methodology (RSM) and a combination of 29.45% polyethylene glycol 8000, 15.5% phosphate, and a pH of 7.0 resulted in an optimal partition coefficient. Partially pure lipase was further purified by a modified batch process using Octyl Sepharose CL-4B in a vacuum filtration apparatus. This two-step process resulted in a purified lipase with a yield of 74.6% having a specific activity of 88.8 U/mg of protein and a purification fold of 14.92. The homogeneity of the lipase preparation obtained by the purification process was confirmed by reversed phase high performance liquid chromatography profile. The molecular weight of the purified lipase was found to be around 32 kDa as determined by sodium dodecyl sulfate-polyacrylamide gel electrophoresis. The purified lipase exhibited pH and temperature optima of 8.5 and 37 degrees C, respectively. The lipase was active at low temperatures and it retained 86.8% activity at 10 degrees C. It also displayed other features such as stability over a broad range of pH (3.0-9.0) as well as stability in the presence of hydrogen peroxide and commercial detergents. Based on these characteristics, the potential of this lipase as an additive in laundry detergent formulation was evaluated under low temperature wash conditions. The results indicated that Acinetobacter sp. lipase increased the washing efficiency of the detergent Nirma by 21-24% at 15 degrees C-20 degrees C, respectively.     

New immobilized Schiff bases

In this study, three new immobilized Schiff bases and their Co(II), Cu(II) and Ni(II) metal complexes have been prepared. The ligands silica-Si[N-(3-propyl)2,4-dihydroxybenzaldimine] (1) H₂L, silica-Si[N-(3-propyl)4-methylsalicylaldimine-3-methoxy] (2) HL and silica-Si[N-(3-propyl)2-pyridinecarboxyaldimine] (3) L have bidentate characters. Therefore, the complexes are the mononuclear. Ligands and metal complexes were characterized by FTIR, AAS and thermoanalytical techniques. On the basis of analytical data and IR studies, a 1:1 metal to ligand stoichiometry has been suggested. TG and DTA results showed that these ligands and complexes had good thermal stability. The heat capacities of ligands were reported in the temperature range 273–363 K as no thermal anomaly was found in this temperature range.     

Quantitation of Monosodium Glutamate Using Immobilized Glutamate Oxidase/Peroxidase and Flow Injection Analysis

ABSTRACT

A rapid and sensitive flow injection method is developed for the quantitation of glutamate in food samples. The method incorporates a covalently immobilized glutamate oxidase and peroxidase bioreactor linked in tandem. The H₂O₂ liberated from the glutamate samples as a result of enzymatic action is monitored spectrophotometrically at 552 nm using 4-aminoantipyrine and 3-dimethylaminobenzoic acid as a new chromogenic reagent. Glutamate calibration curves are linear up to 140 μM with a detection limit of 1 μM. Recovery yields from soup matrices are in the range 97 – 101%. Inter- and intra-day precision studies gave CV's of less than 3.5%. The immobilized enzymes show good storage and operational stabilities. Up to 40 samples h^?1 can be manually analyzed. Excellent correlation is obtained from a comparison of the glutamate content of various soup brands and matrix type (solid, condensed and broths) obtained by the proposed FI method with those obtained for the same samples analyzed by the standard reference method (y 0.99x + 0.034).     

Triglyceride Assay by Amperometric Microbial Biosensor: Sample Hydrolysis and Kinetic Approach

ABSTRACT

A triglyceride assay based on triglyceride hydrolysis and glycerol detection was developed. Non-specific lipase isolated from Candida rugosa and intact Gluconobacter oxydans cells, containing membrane-bound glycerol dehydrogenase, were used to develop a biosensor. Two approaches were investigated: analysis of pre-hydrolysed samples and a kinetic approach. The sensor prepared from G. oxydans cells exhibited sensitive and fast response to glycerol: detection limit 20 μM (S/N=3), linear range up to 2 mM and response time 84 s (90% of steady-state). The triglyceride assay of pre-hydrolysed samples was based on a 20 min hydrolysis and determination of released glycerol by the biosensor. A calibration curve linear up to 12 mM was obtained for triolein samples. The kinetic approach was based on simultaneous glyceride hydrolysis and glycerol detection. Analysis time of 10 min, linear range up to 30 mM, and estimated detection limit of 50 μM were achieved using the kinetic approach. The kinetic triglyceride assay is not influenced by free glycerol present in a sample. Storage stability, expressed as a half life (50% of the initial response), was 7 days when trehalose was used as a stabiliser.