基于超分子离子晶体的湿度传感构效关系研究

相对湿度是许多领域的关键参数,环境湿度与人们的生活密切相关,因此对湿度进行测量和控制是各个领域中值得关注的问题之一. 在前期的研究中,作者制备了一种新型的超分子离子材料（SIM）,它是由基于咪唑的双阳离子（如1,10-双（3-甲基咪唑-1-基）癸烷,C₁₀(mim)₂）和电活性二阴离子（如2,2'-连氮基-双（3-乙基苯并噻唑啉-6-磺酸）,ABTS）组成的,发现其对湿度具有敏感且快速的响应. 在此基础上,本文制备了6种不同碳链（C₄,C₆,C₈,C₁₀,C₁₂,C₁₄）的咪唑基化合物,发现其中3种（C₁₀,C₁₂,C₁₄）可与ABTS形成水稳定的SIM. 循环伏安法、计时电流法以及石英晶体微量天平表征了这些超分子离子材料的湿度传感性能,发现基于C12的SIM具有最佳的湿度传感性能. 同时,SEM结果显示随着碳链的增加,离子材料的厚度变薄并且形态变得不规则. 因此,作者认为疏水作用和材料比表面积均会影响湿度传感的灵敏度. 本研究为发展新的湿度响应的离子传感材料奠定了基础.     

An Ultrafast Molecular-Rotor-Based Fluorescent Turn-On Sensor for the Perrhenate Anion in Aqueous Solution

Devising sensors for the perrhenate anion in aqueous media is extremely challenging, and has seldom been reported in the literature. Herein, we report a fluorescence turn-on sensor for the perrhenate anion in aqueous media based on the aggregation-induced emission of a popular ultrafast molecular rotor dye, Thioflavin-T. The selective response towards the perrhenate anion has been rationalized in terms of matching water affinity, with the weakly hydrated perrhenate anion spontaneously forming a contact ion pair with the weakly hydrated ultrafast molecule-rotor-based organic cation, Thioflavin-T, which in turn leads to an aggregate assembly that provides a fluorescence turn-on response towards perrhenate. The sensing response of Thioflavin-T has been found to be quite selective towards the perrhenate anion when tested against anions that are ubiquitously present in the environment, such as chloride, nitrate, and sulfate anions. The formation of self-assembled Thioflavin-T aggregates has also been investigated by time-resolved emission and temperature-dependent measurements.     

Crystal and molecular structure of 1-vinyl-3-methyl-imidazolium iodide,C6H9N2I

The title compound crystallizes with two independent molecules in the unit cell. The two molecules arecis-trans isomers. Crystal data: orthorhombic, P2₁2₁2₁,a=7.0417(6),b=9.5341(9),c=25.411(2) Å,Z=8. The crystal structure has been solved by automated Patterson methods and refined toR=0.024 for 1843 observed reflections.     

Substituted imidazolium phenylphosphonate salts for nonlinear optical applications

Three candidates for potential applications as new nonlinear optical materials were investigated using x-ray crystallography to probe the structure and powder second harmonic generation to elicidate the nonlinear response of the materials. Three structures are reported: 1-benzylimidazolium phenylphosphonate, 2-ethylimidazolium phenylphosphonate, and 2-methylimidazolium phenylphosphonate. Of these three salts two, 2-ethylimidazolium phenylphosphonate and 2-methylimidazolium phenylphosphonate, are noncentrosymmetric and therefore display a nonlinear optical response.     

Crystal structures of four complexes produced by reaction of copper(I) cyanide with imidazoles

Four complexes of CuCN with imidazoles have been prepared by adding the ligand to a solution of CuCN in aqueous sodium thiosulfate. The imidazole ligands used were 2-methylimidazole (mim), 1,2-dimethylimidazole (dmim), 5-chloro-1-methylimidazole (clmim), and 2-phenylimidazole (phim). Complex 1, (CuCN)(mim) is monoclinic, C2/c, a = 9.565(3), b = 7.764(5), c = 8.983(8) Å, = 96.76(3)°, Z, = 4, Complex 2, (CuCN)(dmim) is monoclinic, P2₁/c, a = 8.120(2), b = 11.796(4), c = 16.375(9) Å, , = 100.87(4)°, Z = 8. Complex 3, (CuCN) (clmim) is monoclinic, C2/c, a = 24.907(4), b = 6.894(5), c = 18.259(4) Å, = 102.79(2)°, Z = 16. Complex 4, (CuCN)(phim) is orthorhombic, Pca2₁, a = 9.204(4), b = 8.125(2), c = 26.304(6) Å, Z, = 8. Complexes 1, 2, and 4 have one-dimensional chains –Cu–CN–Cu– with an imidazole bonded to each Cu. Complex 3 has a two-dimensional sheet of CuCN, again with an imidazole bonded to each Cu. In 1 the imidazole group is disordered by a two-fold rotation approximately around the N···N direction in the imidazole group. In 3 one of the imidazole groups has a disorder involving exchange of the Cl and CH₃.     

电感耦合等离子体发射光谱法(ICP-AES)测定高铼酸钾中的19种杂质元素

建立了一种用稀盐酸溶解样品,标准工作溶液中匹配钾,ICP-AES测定高铼酸钾中19种杂质元素的方法。在选定的仪器工作条件下,样品加标回收率(%)分别为：钠94.4～101、钙98.8～102、铝98.1～102、镁95.8～99.1、钴98.4～101、钼97.3～103、钛97.6～102、钒96.6～106、锆96.2～97.7、铬97.8～101、铜98.1～108、铁92.9～104、锰95.5～98.4、镍93.6～101、钯93.3～101、铅96.5～103、锌95.2～103、铂95.9～99.9、铑94.5～96.3;方法精密度RSD%(n=7)分别为：钠2.0～5.5、镁1.1～3.5、铝0.9～2.5、钙1.5～7.3、钴1.1～3.1、钼0.9～4.5、钛1.0～2.8、钒1.6～4.0、锆1.4～3.6、铬0.77～4.6、铜0.74～1.8、铁1.3～3.8、锰1.1～2.0、镍0.99～5.0、钯1.1～2.4、铅1.3～9.1、锌0.80～6.7、铂1.2～10、铑0.78～8.6。方法简便、快速、准确, 满足生产分析要求。     

四硅氧烷Gemini咪唑表面活性剂的合成及表面性能

以三甲基氯硅烷、 γ-氯丙基三氯硅烷、 1,4-二氯丁烷和咪唑等为原料合成了一种新型的四硅氧烷Gemini咪唑表面活性剂([Si₄-4-Si₄im]Cl₂), 通过质谱(MS)和核磁共振氢谱(¹H NMR)证明所得产物为目标产物. 通过Wilhelmy板法测得其在25 ℃下的临界胶束浓度(cmc)为0.54 mmol/L, 水溶液的表面张力(γ_cmc)降至18.6 mN/m. 通过电导率法研究了其胶束形成热力学参数(Δ\begin{array}{c}{G}_m^{0—}\end{array},Δ\begin{array}{c}{H}_m^{0—}\end{array}和Δ\begin{array}{c}{S}_m^{0—}\end{array}), 表明在15~35 ℃下其胶束化过程是自发进行的, 且为熵驱动过程.     

Polymerizable Ionic Liquid Crystals

Polymerizable vinylimidazolium ionic liquids (ILs) that contain mesogenic coumarin and biphenyl units, respectively, have been synthesized. The N‐alkylation of N‐vinylimidazole with bromoalkylated mesogenic units 7‐(6‐bromohexyloxy)coumarin ( 1 ) and 4,4′‐bis(6‐bromohexyloxy)biphenyl ( 2 ) was then carried out. The thermal behavior of the obtained ILs 3 and 4 was investigated by differential scanning calorimetry and polarizing optical microscopy. These measurements showed that the attached mesogenic units induce the self‐assembly of ILs and, therefore, the occurrence of liquid crystalline phases. Subsequently, the ionic liquid crystals (ILCs) 3 and 4 were polymerized by a free‐radical mechanism.

     

Reactions of a modified lysine with aldehydic and diketonic dicarbonyl compounds: an electrospray mass spectrometry structure/activity study

The phenomenon known as non-enzymatic glycation is described as the reaction of reducing sugars with basic amino groups of proteins and nucleic acids, as well as with simple amines, without enzyme mediation. Non-enzymatic model glycation reactions that make use of low-molecular-weight compounds make an important contribution in the elucidation of glicated processes in vitro and in vivo. Four alpha-dicarbonyl compounds, aldehydic (glyoxal, methylglyoxal and phenylglyoxal) and ketonic (diacetyl), were reacted with the modified amino acid N(alpha)-acetyl-L-lysine (AcLys) in an attempt to establish structure/activity relationships for the reactivity of alpha-dicarbonyls with the amine compound. Electrospray ionization mass spectrometry (ESI-MS) combined with tandem mass spectrometry (MS/MS) and collision-induced dissociation (CID) was used to identify and characterize reagents, intermediates and reaction products. The formation of dicarbonyl-derived lysine dimers was observed exclusively. Especially, attention is drawn to alkyl- (asymmetrical dicarbonyl systems) and carboxyl- (glyoxal system) substituted imidazolium ions, at ring position 2.The main differences observed in the reactions studied were related to the reactivity with the diimine intermediate. This intermediate can react either with a non-hydrated dicarbonyl molecule at the aldehydic carbonyl, or with a mono-hydrated one at the ketonic carbonyl, particularly for asymmetrical dicarbonyls. For 2-carboxyl-substituted imidazolium ion (glyoxal reaction), besides the usual keto-enol rearrangement from the diol group, an alternative reaction pathway (proton abstraction) appears to contribute also for the imidazolium ring-closure process. Moreover, the formation of imidazolium ring structures can depend on several factors, namely, the presence (or absence) of electron donor substituents at the formed diol, the degree of stability of the new electrophile generated and/or the equilibrium concentration of the non- and mono-hydrated dicarbonyl forms in solution, the last being particularly important for asymmetrical dicarbonyls.The results reported reveal the complexity of reactivity as well as the diversity of imidazolium molecular structures.