Carbon Dots (C‐dots) from Cow Manure with Impressive Subcellular Selectivity Tuned by Simple Chemical Modification

Improved cellular selectivity for nucleoli staining was achieved by simple chemical modification of carbon dots (C‐dots) synthesized from waste carbon sources such as cow manure (or from glucose). The C‐dots were characterized and functionalized (amine‐passivated) with ethylenediamine, affording amide bonds that resulted in bright green fluorescence. The new modified C‐dots were successfully applied as selective live‐cell fluorescence imaging probes with impressive subcellular selectivity and the ability to selectively stain nucleoli in breast cancer cell lineages (MCF‐7). The C‐dots were also tested in four other cellular models and showed the same cellular selection in live‐cell imaging experiments.     

Fabrication and microstructural characterization of functionally graded porous acrylonitrile butadiene styrene and the effect of cellular morphology on creep behavior

The ability to control material properties in space and time for functionally graded viscoelastic materials makes them an asset where they can be adapted to different design requirements. The continuous microstructure makes them advantageous over conventional composite materials. Functionally graded porous structures have the added advantage over conventional functionally graded materials of offering a significant weight reduction compared to a minor drop in strength. Functionally graded porous structures of acrylonitrile butadiene styrene (ABS) had been fabricated with a solid‐state constrained foaming process. Correlating the microstructure to material properties requires a deterministic analysis of the cellular structure. This is accomplished by analyzing the scanning electron microscopy images with a locally adaptive image threshold technique based on variational energy minimization. This characterization technique of the cellular morphology is analyst independent and works very well for porous structures. Inferences are drawn from the effect of processing on microstructure and then correlated to creep strain and creep compliance. Creep is strongly correlated to porosity and pore sizes but more associated to the size than to porosity. The results show the potential of controlling the cellular morphology and hence tailoring creep strain/compliance of ABS to some desired values. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 795–803     

The effect of cationic groups on the stability of 19F MRI contrast agents in nanoparticles

Fluorine‐19 (¹⁹F)‐based contrast agents are increasingly used for magnetic resonance imaging. Conjugated to polymers, they provide an excellent quantitative imaging tool to detect the movement of the polymeric nanoparticles in vivo as there is no background signal in tissue. One of the challenges is the decline in signal intensity when the conjugated hydrophobic fluorinated functionalities aggregate. Therefore, a new fluorinated monomer was prepared from l ‐arginine that carries a 2,2,2‐trifluoroethyl functional group for imaging. The resulting monomer, 2,2,2‐trifluoroethylamide l ‐arginine methacrylamide (3FArgMA), was copolymerized with poly(ethylene glycol) methyl ether methacrylate (PEGMEMA), [2‐(2,3,4,6‐tetra‐O‐acetyl‐α‐d ‐mannopyranosyloxy)ethyl methacrylate or 1‐O‐methacryloyl‐2,3:4,5‐di‐O‐isopropylidene‐β‐d ‐fructopyranose, respectively, using poly(methyl methacrylate) macro‐reversible addition–fragmentation chain transfer polymerization agent. The resulting block copolymers, which varied in 3FArgMA content, were self‐assembled into micelles of hydrodynamic diameters from 25 to 60 nm. The permanently positively charged arginine functionality on the 3FArgMA displayed repulsive forces against aggregation enabling high spin–spin relaxation times (T₂) in acidic as well as alkaline solutions. However, the longer poly(ethylene glycol) side functionality in PEGMEMA enabled better steric stabilization (T₂~30 ms) while the short fructose side chain was not enough to maintain high T₂ values, in particular when a higher 3FArgMA content was used. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 1994–2001     

A Disulfide Intercalator Toolbox for the Site‐Directed Modification of Polypeptides

A disulfide intercalator toolbox was developed for site‐specific attachment of a broad variety of functional groups to proteins or peptides under mild, physiological conditions. The peptide hormone somatostatin (SST) served as model compound for intercalation into the available disulfide functionalization schemes starting from the intercalator or the reactive SST precursor before or after bioconjugation. A tetrazole–SST derivative was obtained that undergoes photoinduced cycloaddition in mammalian cells, which was monitored by live‐cell imaging.     

FRET-based ratiometric fluorescent detection of arginine in mitochondrion with a hybrid nanoprobe

A ratiometric fluorescent hybrid nanoprobe CDs-1 for arginine(Arg),exhibiting high sensitivity(the limit of detection,LOD,being 6.5×10^-8 mol/L) and excellent selectivity and anti-interference ability,was fabricated through fluorescence resonance energy transfer(FRET) and the electrostatic attraction between positively-charged hemicyanine molecules and negatively-charged carbon dots(CDs).Arg can be quantitatively detected in the concentration range from 6.0×10^-5 mol/L to 2.7×10^-4 mol/L.Further,due to its ability to target mitochondrion and low cytotoxicity,intracellular Arg was succes s fully tracked through ratiometric fluorescence imaging.     

Mass spectrometry imaging of latent fingerprints using titanium oxide development powder as an existing matrix

Recent research has focused on increasing the evidentiary value of latent fingerprints through chemical analysis. Although researchers have optimized the use of organic and metal matrices for matrix‐assisted laser desorption/ionization‐mass spectrometry imaging (MALDI‐MSI) of latent fingerprints, the use of development powders as matrices has not been fully investigated. Carbon forensic powder (CFP), a common nonporous development technique, was shown to be an efficient one‐step matrix; however, a high‐resolution mass spectrometer was required in the low mass range due to carbon clusters. Titanium oxide (TiO₂) is another commonly used development powder, especially for dark nonporous surfaces. Here, forensic TiO₂ powder is utilized as a single‐step development and matrix technique for chemical imaging of latent fingerprints without the requirement of a high‐resolution mass spectrometer. All studied compounds were successfully detected when TiO₂ was used as the matrix in positive mode, although, generally, the overall ion signals were lower than the previously studied CFP. TiO₂ provided quality mass spectrometry (MS) images of endogenous and exogenous latent fingerprint compounds. The subsequent addition of traditional matrices on top of the TiO₂ powder was ineffective for universal detection of latent fingerprint compounds. Forensic TiO₂ development powder works as an efficient single‐step development and matrix technique for MALDI‐MSI analysis of latent fingerprints in positive mode and does not require a high‐resolution mass spectrometer for analysis.     

Supramolecular Assembly of TPE-Based Glycoclusters with Dicyanomethylene-4H-pyran (DM) Fluorescent Probes Improve Their Properties for Peroxynitrite Sensing and Cell Imaging

Two red-emitting dicyanomethylene-4H-pyran (DM) based fluorescent probes were designed and used for peroxynitrite (ONOO⁻) detection. Nevertheless, the aggregation-caused quenching effect diminished the fluorescence and restricted their further applications. To overcome this problem, tetraphenylethylene (TPE) based glycoclusters were used to self-assemble with these DM probes to obtain supramolecular water-soluble glyco-dots. This self-assembly strategy enhanced the fluorescence intensity, leading to an enhanced selectivity and activity of the resulting glyco-dot comparing to DM probes alone in PBS buffer. The glyco-dots also exhibited better results during fluorescence sensing of intracellular ONOO⁻ than the probes alone, thereby offering scope for the development of other similar supramolecular glyco-systems for chemical biological studies.     

A pH-Sensitive Zwitterionic Iron Complex Probe with High Biocompatibility for Tumor-Specific Magnetic Resonance Imaging

Accurate diagnosis of tumor characteristics, including its location and boundary, is of immense value to subsequent therapy. Activatable magnetic resonance imaging (MRI) contrast agents that respond to tumor-specific microenvironments, such as the redox state, pH, and enzyme activity, enable better mapping of tumor tissue. However, the practical application of most reported activatable agents is hampered by problems including potential toxicity, inefficient elimination, and slow activation. In this study, we developed a zwitterionic iron complex (Fe-ZDS) as a positive MRI contrast agent for tumor-specific imaging. Fe-ZDS could dissociate in weakly acidic solution rapidly, accompanied by clear longitudinal relaxivity (r₁) enhancement, which enabled the complex to act as a pH-sensitive contrast agent for tumor-specific MR imaging. In vivo experiments showed that Fe-ZDS rapidly enhanced the tumor-to-normal contrast ratio by >40 %, which assisted in distinguishing the tumor boundary. Furthermore, Fe-ZDS circulated freely in the bloodstream and was excreted relatively safely via kidneys owing to its zwitterionic nature. Therefore, Fe-ZDS is an ideal candidate for a tumor-specific MRI contrast agent and holds considerable potential for clinical translation.     

氧化铁纳米颗粒在磁共振成像中的应用

目前临床诊断中钆基造影剂的应用十分广泛,然而其对人体的毒性无法忽视,因此研究者致力于低毒性造影剂的研发。氧化铁纳米颗粒(Iron Oxide Nanoparticles,IONP)因其超顺磁性在磁共振成像(Magnetic Resonance Imaging,MRI)中具有良好的暗对比效果,并且具有良好的生物相容性。随着生物材料和分子影像技术的发展,IONP在MRI成像中的应用愈发广泛。近年来,IONP在多模态成像和诊断治疗一体化方面取得了进展。本文将以IONP的MRI成像机理、制备和表面修饰为基础,阐述近年来IONP在MRI成像应用的研究成果和问题,期望IONP取得更好的发展。     

Microscopic functional specificity can be predicted from fMRI signals in ventral visual areas

Functional areas specialized for recognition can be activated by a non-preferred stimulus as well as a preferred stimulus. The functional magnetic resonance imaging signals detected in response to different stimuli in an area may have the same or different amplitudes. However, it is uncertain whether the responses originate from the same neuronal populations or heterogeneous ones. To address this concern, we propose a novel method that uses multi-echo echo-planar imaging sequences to evaluate changes in the transverse relaxation profile caused by stimulation. According to this method, the areas related with visual recognition, i.e. fusiform face area and parahippocampal place area, have different transverse relaxation profiles to preferred and non-preferred stimuli, which can be considered as reflecting a difference in neuronal population processing stimuli in those areas. The proposed method can be useful for probing the microscopic functional specificity of brain areas.