New travelling wave solutions for a nonlinearly dispersive wave equation of Camassa-Holm equation type

In this paper, the integral bifurcation method is used to study a nonlinearly dispersive wave equation of Camassa-Holm equation type. Loop soliton solution and periodic loop soliton solution, solitary wave solution and solitary cusp wave solution, smooth periodic wave solution and non-smooth periodic wave solution of this equation are obtained, their dynamic characters are discussed. Some solutions have an interesting phenomenon that one solution admits multi-waves when parameters vary.     

Effects of stress dependent electrochemical reaction on voltage hysteresis of lithium ion batteries

Intercalation of lithium ions into the electrodes of lithium ion batteries is affected by the stress of active materials, leading to energy dissipation and stress dependent voltage hysteresis. A reaction-diffusion-stress coupling model is established to investigate the stress effects under galvanostatic and potentiostatic operations. It is found from simulations that the stress hysteresis contributes to the voltage hysteresis and leads to the energy dissipation. In addition, the stress induced voltage hysteresis is small in low rate galvanostatic operations but extraordinarily significant in high rate cases. In potentiostatic operations, the stresses and stress induced overpotentials increase to a peak value very soon after the operation commences and decays all the left time. Therefore, a combined charge-discharge operation is suggested, i.e., first the galvanostatic one and then the potentiostatic one. This combined operation can not only avoid the extreme stress during operations so as to prevent electrodes from failure but also reduce the voltage hysteresis and energy dissipation due to stress effects.     

A multiplex SNP genotyping by allele‐specificspecific PCR based on stem‐loop and universal fluorescent primers of Chr1daxin mice

Single nucleotide polymorphisms (SNPs) are one of the most common markers in mammals. Rapid, accurate, and multiplex typing of SNPs is critical for subsequent biological and genetic research. In this study, we have developed a novel method for multiplex genotyping SNPs in mice. The method involves allele‐specific PCR amplification of genomic DNA with two stem‐loop primers accompanied by two different universal fluorescent primers. Blue and green fluorescent signals were conveniently detected on a DNA sequencer. We verified four SNPs of 65 mice based on the novel method, and it is well suited for multiplex genotyping as it requires only one reaction per sample in a single tube with multiplex PCR. The use of universal fluorescent primers greatly reduces the cost of designing different fluorescent probes for each SNP. Therefore, this method can be applied to many biological and genetic studies, such as multiple candidate gene testing, genome‐wide association study, pharmacogenetics, and medical diagnostics.     

滤波对8字腔掺铒光纤激光器锁模运转的影响

构建了基于损耗非对称非线性光学环镜的8字腔掺铒光纤锁模激光器,并讨论了腔内滤波带宽对腔内脉冲演化和激光器输出特性的影响.在非线性光学环镜中引入双向输出耦合器,耦合器和传输光纤位置的不对称产生非互易性,实现锁模运转.利用自制的可调谐滤波器实验研究了滤波带宽对激光器的影响.当滤波带宽为2.1 nm时,腔内脉冲的演化过程受滤波和孤子效应的共同作用,激光器顺时针和逆时针输出脉冲半高全宽分别为583.7fs和2.94 ps.随着滤波带宽增大,滤波的作用逐渐减弱,激光器两路输出脉冲参数逐渐接近,并接近傅里叶变换极限脉冲.当滤波带宽较大时,腔内脉冲的演化过程受增益谱和孤子效应的共同作用,激光器顺时针和逆时针输出脉冲均为变换极限脉冲,半高全宽约为440 fs.通过调节滤波器中心波长实现了对激光器输出脉冲光谱的连续调谐,调节范围大于30 nm.     

Study on the dynamic critical behavior of a ferroelectric heterostructure

A Landau–Devonshire theory added in Landau–Khalatnikov dynamic equation has been used firstly to explore the dynamic critical behavior of a ferroelectric heterostructure composed of two different ferroelectric films. Two identical surface transition layers within each film are assumed, and an antiferroelectric interfacial coupling between two materials is considered. One interfacial parameter β is introduced to describe the differences of physical characteristics between two constituent films, which can reflect more realistic dynamic mechanism. It is found that the ferroelectric heterostructure may exhibit multi-loop hysteresis loop and four peaks of dielectric susceptibility if the appropriate values of parameter β, antiferroelectric interfacial coupling and size of the system are selected. We obtain the critical behavior of the appearance in multi-loop hysteresis loops and four peaks of dielectric susceptibility by equilibrium action of parameter β and antiferroelectric interfacial coupling, which will provide theoretical guiding for designing the multi-state memory and miniaturized device in future.     

Ferroelectric,magnetoelectric and photoelectric properties of BiFeO3 /LaNiO3 heterostructure

BiFeO₃/LaNiO₃ (BFO/LNO) heterostructure was fabricated on quartz substrate via RF sputtering method. The microstructure and surface morphology of the BFO/LNO heterostructure was demonstrated. BFO layer shows good ferroelectric and weak ferromagnetic characters at room temperature. The dielectric constants of the heterostructure under an applied magnetic field 1.2T and zero field are both decreased with increasing frequency at room temperature and the dielectric constant under the applied magnetic field is larger, which is attributed to the coupling between the electric and magnetic dipoles, and further demonstrated in the framework of the Ginzburg-Landau theory for second phase transition. Additionally, the photoconductivity of the heterostructure under blue-laser illumination was observed, and the photoconductivity increase with the enhanced power of the blue-laser.     

Hysteresis loops of fiber-reinforced ceramic-matrix composites under in-phase/out-of-phase thermomechanical and isothermal cyclic loading

In this paper, the stress?strain hysteresis loops of fiber-reinforced ceramic-matrix composites (CMCs) under in-phase/out-of-phase thermomechanical and isothermal cyclic loading have been investigated. The thermomechanical hysteresis loops models have been developed considering synergistic effects of thermal temperature cycling, stress levels and fiber/matrix interface debonding. The relationships between thermal cyclic temperatures, peak stress, fiber/matrix interface shear stress and stress?strain hysteresis loops under in-phase/out-of-phase thermomechanical and isothermal cyclic loading have been established. The effects of fiber volume fraction, peak stress, matrix crack spacing, interface frictional coefficient, interface debonded energy and temperature range on the stress?strain hysteresis loops under in-phase/out-of-phase thermomechanical and isothermal cyclic loading have been analyzed. The hysteresis loops of cross-ply SiC/magnesium aluminosilicate (MAS) composite under in-phase/out-of-phase thermomechanical and isothermal fatigue loading have been predicted.     

Ka频段GaN功放的预失真线性化器设计

基于满足目前高效复杂的调制技术对功率放大器线性化度越来越高的需求的目的,采用模拟预失真技术设计了一种线性化器,用来改善Ka频段氮化镓(GaN)固态功放的非线性化失真。通过改进传统的并联式二极管预失真电路,采用开环技术,将两个肖特基二极管并联。改变二极管的偏置状态,得到不同的改善程度的预失真信号。结合使用专用电磁仿真软件ADS2013做电路仿真,通过参数扫描得到二极管偏置状态的初始值,为实物调试提供理论基础。通过对已加工的实物测试,结果表明：增益幅度补偿达到6.4dB,相位补偿达到28°。     

平板式mLHP的仿真与实验研究

环路热管是一种靠蒸发器的毛细芯产生毛细力来驱动回路运行,利用工质相变来传递热量的高效传热装置.本文研制了一套不锈钢外壳,以氨为工质的小型平板式环路热管(mLHP),并着重研究其在不同热负荷条件下启动特性及变工况条件下的稳定运行特征,通过对平板 mLHP 运行机制理论分析,建立了合理的数学物理模型,实现了对整个系统动态仿真.实验结果表明,小型平板式 mLHP 可以在不同热流密度下快速启动,并具有良好的适应变热负荷能力.实现了平板式 mLHP 系统中各个主要节点的压力、温度和流量的动态仿真,与实验数据对比,仿真结果和实验数据吻合较好,加深了对 LHP 系统运行机理的理解.通过实验和动态仿真结果对系统结构进行优化,为应用在电子器件散热的高效率平板式 mLHP 系统的设计与优化提供依据.     

All-optical microwave notch filter with flat passband based on semiconductor optical amplifier

An all-optical filter structure for interference mitigation of microwave signals is proposed and demonstrated. The structure is based on a recirculating delay line loop (RDLL) and a fiber Bragg grating. The RDLL is comprised of a semiconductor optical amplifier (SOA) followed by a tunable narrowband optical filter and an optical variable delay line. Negative tap is generated using wavelength conversion based on the cross-gain modulation of amplified spontaneous emission spectrum of the SOA. A negative band-pass filter and a broadband all-pass filter are synthesized to achieve a narrow notch filter with flat passband which can excise interference with minimal impact on the wanted signal over a wide microwave range. Experimental results show the notch rejection ratio of 30 dB, good shape factor and tunability.