NFR (Natural Frequency Region) approach for dynamic evaluation of anti-vibration systems with rebound resilience method

There is no universal method to perform dynamic analysis on solid rubber anti-vibration systems. In this article, an equivalent damping ratio is introduced to account for rubber hysteresis using a resilience experiment. A new concept, NFR (Natural Frequency Region), is defined for dynamic evaluation based on natural characteristics of a rubber anti-vibration system itself. Two typical industrial products were selected to verify the proposed NFR approach. The verification procedure involves three parts: natural frequencies, harmonic spectra and impact responses. The dynamic responses from both simulation and experiment have been compared and have not only demonstrated that the proposed approach is reliable but that it could also be used to guide the design of rubber anti-vibration systems in industry. The key points for applying this approach are also presented through the verification procedure.     

Observational effects from quantum cosmology

The status of quantum cosmologies as testable models of the early universe is assessed in the context of inflation. While traditional Wheeler–DeWitt quantization is unable to produce sizable effects in the cosmic microwave background, the more recent loop quantum cosmology can generate potentially detectable departures from the standard cosmic spectrum. Thus, present observations constrain the parameter space of the model, which could be made falsifiable by near‐future experiments.     

环路跟踪卡尔曼滤波算法的性能分析

基于卡尔曼滤波的环路跟踪算法多是通过一定仿真证明算法性能,没有系统性性能评估,难以较好指导工程应用。在原有算法基础上进行了优化,并系统性地对比分析、评估了基于卡尔曼环路滤波算法性能,以期为算法工程化提供指导。首先提出对跟踪环路反馈调整量进行预测,使之更符合系统实际,减小环路跟踪误差。而后基于卫星信号模拟器输出信号和自生产信号源,充分评估基于卡尔曼滤波环路跟踪算法的收敛时间和灵敏度。仿真结果表明,相比目前工程常用的二阶FFL辅助三阶PLL算法,基于卡尔曼滤波环路跟踪算法能够缩短环路所需稳定时间约90%,并能提升跟踪灵敏度约5 d B,有效改善弱信号场景中接收机输出信息的完好性和连续性。     

Global hysteresis in ferroelectrics with incommensurate phases

A review of the basic experimental results connected with the formation of long-living metastable states in the incommensurate phases of ferroelectric crystals and related phenomena is given. The interpretation and appropriate physical mechanisms underlying the global hysteresis phenomena associated with these states are considered.     

级联光栅结合Sagnac环的可调谐光纤激光器

提出并验证了一种单-双波长可调谐掺铒光纤激光器。利用级联光纤布拉格光栅(Cascaded Fiber Bragg gratings,Cascaded FBGs)结合Sagnac环结构所产生的复合滤波效应,实现较高精细度滤波,并通过调节环内偏振控制器(Polarization Controller,PC),引入双折射效应,得到波长可调谐的光纤激光器。基于耦合模理论并使用传输矩阵法对该结构的传输特性进行了分析,在此基础上搭建实验系统,验证了理论分析的正确性。实验结果表明:通过调节PC,激光器输出激光的波长范围约为1 555.644～1 556.112 nm,双波长间隔的可调范围约为0.108～0.452 nm,单-双波长的边模抑制比(SMSR)均高于40 dB;在稳定性测试中,输出单-双波长激光的波长最大漂移量小于0.008 nm。该方法具有结构简单、调谐方便、易于实现且精细度较高的优点,可应用于密集波分复用及全光通信系统等领域。     

Microstructure change in deuterium implanted CLAM steel induced by electron irradiation

As Reduced Activation Ferritic/Martensitic (RAFM) steel is considered the primary candidate for use as a structural material in fusion power reactors,many countries are developing different kinds of RAFM.China is developing new CLAM (China Low Activation Martensitic) steel.The study investigates microstructural changes in CLAM steel implanted with deuterium ions induced by 1250 keV electron irradiation from R.T.to 873 K,and observes both the growth and shrinkage of the defect clusters produced by deuterium ...     

Dynamic Rebound Behavior of Silica/Natural Rubber Composites: Fly Ash Particles and Precipitated Silica

This article investigated the elastic response of natural rubber (NR) compounds filled with silica from fly ash particles (FASi) and commercial precipitated silica (PSi), through a dynamic rebound test. The effects of silica content and initial drop‐height on the height and number of rebounds, dynamic stiffness, and the energy loss were of interest. The results suggested that the unfilled NR vulcanizates exhibited a greater elastic response than the FASi and PSi‐filled vulcanized composites. For given silica contents, the NR compounds with FASi had better elastic response than those with PSi, where the elastic response decreased with an increase in silica content. The greater the silica contents, the higher the dynamic stiffness of the composites. The initial drop‐height had no effects on the elastic response change for the unfilled NR compound, but resulted in an increase in the energy loss for the silica‐filled NR composites. The differences in the elastic responses for the NR compounds filled with silica from FASi and PSi were associated with the differences in crosslink density and the filler–filler interaction influenced by content of bis(3‐triethoxysilylpropyl) tetrasulfane (designated as Si69) used.     

Synthesis and Liquid Crystalline Behavior of Random Copolymer of Poly(ethylene oxide) Macromonomer and Liquid Crystalline Monomer by the Photon Transmission Technique

Random copolymers of poly(ethylene oxide) macromonomer with p‐vinylbenzyl end‐functional group (PEOVB) and liquid crystalline monomer, namely 6‐(4‐cyanobiphenyl‐4′‐oxy)hexyl acrylate (COA), were prepared by conventional free radical polymerization. A living anionic polymerization technique was employed for the synthesis of PEO macromonomers bearing p‐vinylbenzyl moiety at one end. The photon transmission method was also applied to study the phase transitions of COA monomer and its random copolymer with PEO. It was found that, for both samples, the nematic‐smectic A transition is continuous, but the critical fluctuation regions do not allow to obtain 3D XY values. Instead, we have obtained the values close to mean field regime. Scaling of thermal hystersis for random copolymer sample near the nematic‐isotropic transition was studied as well. Thermal hysteresis loops were produced under linearly varying temperature. It was shown that the areas of the hysteresis loops scale with the temperature scanning rate with an exponent being equal to 0.614 which is in good agreement with the field‐theoretical value.     

Critical Evaluation of Adsorption–Desorption Hysteresis of Heavy Metal Ions from Carbon Nanotubes: Influence of Wall Number and Surface Functionalization

Single‐, double‐, and multi‐walled carbon nanotubes (SWCNTs, DWCNTs, and MWCNTs), and two oxidized MWCNTs with different oxygen contents (2.51 wt % and 3.5 wt %) were used to study the effect of the wall number and surface functionalization of CNTs on their adsorption capacity and adsorption–desorption hysteresis for heavy metal ions (Ni^II, Cd^II, and Pb^II). Metal ions adsorbed on CNTs could be desorbed by lowering the solution pH. Adsoprtion of heavy metal ions was not completely reversible when the supernatant was replaced with metal ion‐free electrolyte solution. With increasing wall number and amount of surface functional groups, CNTs had more surface defects and exhibited higher adsorption capacity and higher adsorption–desorption hysteresis index (HI) values. The coverage of heavy metal ions on the surface of CNTs, solution pH, and temperature affect the metal ion adsorption–desorption hysteresis. A possible shift in the adsorption mechanism from mainly irreversible to largely reversible processes may take place, as the amount of metal ions adsorbed on CNTs increases. Heavy metal ions may be irreversibly adsorbed on defect sites.