The complete closed coexistence curves for 2H,3H,6H,7H,8H-5,8-(Dimethylmethano)-5(R)-methylquinoxaline with water and with deuterium oxide

The complete closed solubility curves for 2H, 3H, 6H, 7H, 8H-5,8-(dimethylmethano)-5(R)-methylquinoxaline with water and with deuterium oxide have been determined. With water the lower critical solution temperature (LCST) was found to be 51.4°C and the critical solution temperature (CST) was found to be 215.0°C. With deuterium oxide the values were 40.4°C for the LSCT and 221.7°C for the CST. The deuterium oxide curve completely encompassed the water curve. Solution compositions at the critical temperatures were also determined.     

Multivariate curve resolution in liquid chromatography—resolving two-way multi-component data using a Varimax extended rotation

The Varimax extended rotations (VER) have been proposed as a new method to mathematically resolve severely overlapped peaks in chromatographic experiments that produce bilinear data. VER employs a four-step procedure to determine the relative concentration and identity of the components that comprise a severely overlapped chromatographic peak. In the first step, the data are pre-processed to ensure that they are in a form suitable for multivariate curve resolution. The second step involves principal component analysis, which reduces the dimensionality of the data matrix while simultaneously retaining the information present in the data. In the third step, a new coordinate system is developed for the data using a Varimax rotation followed by a so-called extended rotation, which assists in identifying the so-called pure regions in the peak. Identifying these regions is crucial to rotating the concentration and spectral matrices towards a solution. The fourth step utilizes alternating least squares (ALS) to improve the estimates of the concentration and spectral profiles of each component. Results from real and simulated data are used to illustrate the efficacy and simplicity of the proposed method.     

Preparation and photocrosslinking behaviors of polyesters derived from trans-2,2′-dihydroxystilbene

The monomer, trans-2,2′-dihydroxystilbene (DHS), has been prepared by asymmetric photocleavage (254 nm) of coumarin dimer acid derived from coumarin dimer. Four new polyesters are successfully synthesized by interfacial polycondensation of the DHS with adipoyl chloride, azelaoyl chloride, sebacoyl chloride, and dodecanedioyl dichloride, respectively. The reduced viscosities of the polyesters decrease from 0.32 to 0.11 dL/g as the number of methylene unit in diacid chlorides increases from 4 to 10. From DSC investigation, it is found that the polyesters are semi-crystalline polymers with T_m = 39–192°C. Under 350 nm light, photocrosslinking behavior in solution and film-state is investigated by UV spectral change with irradiation time (350 nm). The photoreactive stilbene chromophores in the main chain dimerize to form cyclobutane derivatives, and lead to crosslinking of the polyesters. Photosensitivity in the film state has also been evaluated by their characteristic curves. Polyester from dodecanedioyl dichloride ( 5d ) exhibits the highest initial reaction rate and ultimate crosslinking ratio. © 1995 John Wiley & Sons, Inc.     

Effect of partial substitution of nickel for copper on LaNi5 activation

The first cycles of hydrogen absorption-desorption in LaNi₅-H₂ and LaNi_4.5Cu_0.5-H₂ systems were studied using Tian-Calvet differential heat-conduction microcalorimetry, volumetric measurements, and powder X-ray diffraction. The diffraction profiles were analyzed, and the microstructure characteristics of the LaNi₅ and LaNi_4.5Cu_0.5 systems at different stages of activation were determined. The pressure-composition isotherms were plotted, and the enthalpies of phase transitions α→β and β→α were calculated. The effect of substitution on the change in the thermodynamic parameters and microstructure characteristics of the hydride-forming intermetallic compounds during activation was shown. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 915–920, June, 2006.     

铁合金厂回收的硅微粉在不同温度下晶相结构的研究

铁合金厂冶炼过程产生的大量硅微粉烟尘, 可以作为耐火材料和窑具材料的结合剂, 活性剂和矿化剂, 可促进耐火材料固相反应和烧结, 有利于晶型的转变, 提高耐火材料的高温性能。硅微粉在高于或等于1100 ℃不析晶。1200和1300 ℃析晶规律是:首先α-石英转变为α-方石英, 然后转变为α-鳞石英。在1400～1450 ℃首先析出卡片号为290085的石英变体, 然后转变为α-方石英。 而常规转化过程是α-方石英很难形成α-鳞石英, 而且不形成290085的变体, 因此其转化规律与常规不同。在液相存在情况下, 少量α-方石英转变为α-鳞石英, 不同温度下析晶结构探讨为实际生产提供适宜的升温曲线。     

A comparison of statistical methods for prenatal screening for Down syndrome

Currently, prenatal screening for Down Syndrome (DS) uses the mother's age as well as three biochemical markers for risk prediction. Risk calculations for the biochemical markers use a quadratic discriminant function. In this paper we compare several classification procedures to quadratic discrimination methods for biochemical-based DS risk prediction, based on data from a prospective multicentre prenatal screening study. We investigate alternative methods including linear discriminant methods, logistic regression methods, neural network methods, and classification and regression-tree methods. Several experiments are performed, and in each experiment resampling methods are used to create training and testing data sets. The procedures on the test data set are summarized by the area under their receiver operating characteristic curves. In each experiment this process is repeated 500 times and then the classification procedures are compared. We find that several methods are superior to the currently used quadratic discriminant method for risk estimation for these data. The implications of these results for prenatal screening programs are discussed.     

La3Ga5SiO14的BAW传播特性

详细推导计算了声体波(BAW)在La3Ga5SiO14(LGS)晶体中分别沿YZ、XY、XZ面传播的纯切变波,准切变波,准纵波的表达式.绘制了LGS晶体在(100)、(010)、(001)这三个主晶面内声的慢度分布曲线图.计算了声速的最大值并与石英进行比较,结果表明LGS晶体的BAW传播速度一般比石英低1000m/s左右.为该晶体在声体波器件等方面的设计和应用提供了一定的理论指导作用.     

Characterization of stress‐strain behavior for binary blends of isotactic polypropylene with ethylene‐α‐olefin copolymer

The characterization of the mechanical nonlinear behavior of isotactic polypropylene/ethylene‐1‐hexene copolymer blends with various kinds of morphology was carried out using a nonlinear constitutive equation in which the plastic deformation and the anharmonicity of elastic response are taken into account. It was found that the mechanical nonlinearity of the incompatible blends showing phase separation is much greater than that of the compatible blends having rubbery components in the interlamellar regions. Moreover, the mechanical behavior is governed by the plastic deformation for the incompatible blends, whereas the anharmonicity strongly affects the mechanical behavior for the compatible blends. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 1513–1521, 1999     

Segmental and chain orientational behavior of spandex fibers

The internal structure and orientation behavior of two series of spandex fibers, which were made with different spinning methods and different soft and hard segment types, were studied by FTIR (Fourier Transform Infrared Spectroscopy), polarizing light microscopy, and Instron. The orientation behavior of hard and soft segments was studied with FTIR and those of polymeric chains with polarizing miscroscopy while the fibers were being stretched by the mechanical stretcher. The orientation behavior of dry-spun fibers was observed to be very different from that of the melt-spun fibers, which may be explained in terms of the internal structural difference such as the degree of phase separation and mechanical stability of the hard domains between the two types of fibers. In general, the dry-spun fibers showed better elastic recovery property than the melt-spun fibers. Since the polymer for the dry-spun fibers was synthesized with ethylene diamine as a chain extender resulting in the urea groups in the hard segments, it forms more stable hard domain due to the high cohesion energy between the urea groups. The change of the birefringence values during the cyclic deformation was studied with the polarizing light microscopy. The birefringence behaviors of the two dry-spun fibers were similar, whereas there was a noticeable difference between the two melt-spun fibers. The difference was explained in terms of the effect of crosslinking agent in one of the melt-spun fibers, which can stabilize the hard domain structure against the external stress. Mechanical hysteresis values measured gave results consistent with those of FTIR and birefringence measurements. © 1997 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 35: 1821–1832, 1997     

Investigation of adhesion hysteresis in poly(dimethylsiloxane) networks using the JKR technique

The JKR technique was used to determine the source and nature of the adhesion hysteresis present in modified poly(dimethylsiloxane) (PDMS) networks. As controlled excess amounts of the tetrafunctional crosslinker were added to the networks, the adhesion hysteresis increased. It was found that by poisoning the catalyst with a thiol the hysteresis could be significantly lowered, and completely removed in some cases. We believe that the adhesion hysteresis in this system stems from a complexation between the excess crosslinker and the catalyst. We found that the work of adhesion in this case is a function of the unloading rate. The unloading rate dependence of this chemical adhesion hysteresis was attributed to the rate of bond dissociation. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36: 2129–2139, 1998