TC4钛合金超高周次轴向振动疲劳试验

应用基于压电超声疲劳试验技术开发的20kHz轴向振动疲劳试验系统,完成了室温下TC4钛合金超高周疲劳试验,获得了TC4合金在107～109周次范围内的轴向振动疲劳寿命曲线(S-N曲线);运用C.Paris推导公式预测了TC4合金材料的寿命,得到各应力水平下破坏率为50％、95％、99％的安全寿命.结果表明:在疲劳循环大于107周次时,试件仍会发生疲劳断裂,疲劳强度随循环次数的增加而下降,并不存在明显的疲劳极限.TC4合金的S-N曲线在107～109周次的范围内呈连续下降型.在轴向振动超高周疲劳试验中,试件的裂纹扩展寿命只占其在50％破坏率下疲劳安全寿命的一小部分,其疲劳寿命主要由试件的裂纹萌生寿命决定.     

显式模拟类橡胶材料Mullins效应滞回圈

通过显式、直接的方法提出一个多轴可压缩应变能函数,用来模拟类橡胶材料在加载——卸载作用下,由于Mullins效应而产生的应力——应变滞回圈. 本文的创新点在于将表征能量耗散的变量引入到应变能函数.新的弹性势具有以下两个特点:第一,在加载情况下,新引入的变量不会对弹性势产生任何影响,因此,只要给出合适的形函数显式表达,3个基准实验,包括单轴拉伸和压缩,等双轴拉伸和压缩,以及平面应变,都可精确模拟;第二,新引入的变量在卸载情况下将被激活.在不同的卸载应力下,变量将发生改变,从而影响弹性势,使其最终产生不同的应力——应变关系卸载曲线,与对应的加载曲线共同构成应力——应变滞回圈.通过对Mullins效应实验数据进行分析和研究,得出了卸载形函数在不同卸载应力下变化的规律,并预测不同卸载应力下的应力——应变关系.最后,我们将得到精确匹配实验数据的数值模拟结果,从而证明本文方法不仅可以精确匹配至少3个基准实验,还可以模拟和预测类橡胶材料在加载——卸载作用下由于Mullins效应而产生的滞回圈.      

近壁面柱体涡激振动的迟滞效应

柱体涡激振动是典型的流固耦合问题,其响应规律标识码在升速流动和远离壁面条件下获得的. 而自然环境流动通常不断经历升速和降速过程,近壁面柱体的涡激振动可呈现与远离标识码体不同的响应特征. 本研究结合大型波流水槽,设计了具有微结构阻尼的柱体涡激振动装置. 基于量纲分析,开展系列水槽标识码验,通过同步测量柱体涡激振动位移时程和绕流流场变化,研究了升降流速作用下柱体涡激振动触发和停振的临界速度(即上临标识码临界速度)变化规律,探究了近壁面柱体涡激振动迟滞效应. 采用自下向上激光扫射的 PIV 流场测量系统,对比分析了固定柱体标识码振动柱体的绕流特征. 实验观测表明,近壁面柱体涡激振动触发的临界速度呈现随壁面间距比减小而逐渐减小的变化趋势;但标识码速条件下的涡激振动停振所对应的下临界速度却明显小于升速时的涡激振动触发所对应的上临界速度. 采用上临界与下临界约标识码差值可定量表征涡激振动迟滞程度,研究发现该值随着柱体间距比减小呈线性增大趋势. 涡激振动迟滞现象通常伴随振幅阶跃标识码阶跃值则随着间距比减小而非线性减小.      

Zero—field—cooled and field—cooled magnetizations and magnetic susceptibility of itinerant ferromagnet SrRuO3

Zero-field-cooled(ZFC) magnetization,field-cooled(FC) magnetization,ac magnetic susceptibility and major hysteresis loops of itinerant ferromagnet SrRuO3 have been measured at magnetic ordering temperatures ranging from 5 to 160K.An empirical model is proposed to calculate the measured ZFC magnetization.The result indicates that the calculated ZFC magnetization compares well with the measured one.Based on the generalized Preisach model.both the ZFC and FC curves are reproduced by numerical simulations.The critical temperature and critical exponents are determined by measuring the ac magnetic susceptibility in different bias magnetic fields at temperatures in the vicinity of the point of phase transition.     

Determination of the second step microstructure for superhydrophobic surfaces

A selection of suitable microstructures is critical to fabrication and properties of superhydrophobic surfaces (SHS). In this study, we introduce a three‐dimensional droplet model to thermodynamically analyze the superhydrophobic properties for the purpose of determining the second step of a two‐step microstructure suitable for the SHS based on the common models within the reach of the existing macro‐machining technology. It is found that a sinusoidal microstructure is the most suitable, followed by a cone frustum and a prism in the composite wetting state, as well as the transition from hydrophilic to hydrophobic depends basically on the solid fraction rather than non‐determinative surface microscopic topography. The predictions of the model are found in quite good agreement with the experimental observations. This study will facilitate fabrication of the SHS on how to select the suitable morphology. Copyright © 2012 John Wiley & Sons, Ltd.     

空间参数曲线的双目标能量极小化方法及其应用

能量极小化方法已广泛用于平面曲线的构造,而在空间曲线构造方面的应用尚少。首先介绍了空间参数曲线的弯曲能和扭曲能,然后提出了一种以弯曲能和扭曲能同时极小为目标的空间参数曲线构造方法,最后以空间三次Bézier曲线为例,探讨了该方法在曲线的构造、延拓、平滑等问题中的应用。所提出的方法更符合空间参数曲线既需考虑弯曲又需考虑扭曲的特点。     

基于BP网络的混凝土耗能器骨架曲线拟合

结合5种混凝土延性柱耗能器在低周期反复荷载作用下的试验数据研究,利用神经网络的工作原理,通过建立神经网络的输入层、隐含层、输出层,确定输入单元、输出单元和隐含层节点数,从而建立了BP神经网络的模型,并根据已有的部分试验数据数据.对网络进行训练,对各种混凝土延性柱耗能器骨架曲线进行了预测拟合,实现混凝土延性柱耗能器骨架曲线的数字化,使其成为具有分析和判断的拟合曲线功能,完整的描绘混凝土延性柱耗能器的骨架曲线,为后续混凝土延性柱耗能器性能研究的仿真模拟提供了可靠的数据模型.结果表明,这种方法是可行的.     

Fredholm theory for pseudoholomorphic curves with brake symmetry

We study the pseudoholomorphic curves with brake symmetry in symplectization of a closed contact manifold. We introduce the pseudo-holomorphic curves with brake symmetry and the corresponding moduli space. Then we get the virtual dimension of the moduli space.     

椭圆曲线y~2=x~3-21x+90的正整数点

利用初等方法证明了椭圆曲线y~2=x~3-21x+90无正整数点.     

Two-dimensional four-line models of the Ising model type

We briefly describe the theory of root transfer matrices for four-line models with the field in the new indexless form. We use theoretical and numerical methods to reveal new effects in the theory of singular points and phase transitions. A substantial part of the results is obtained using a numerical algorithm that drastically (at least exponentially) reduces the computational complexity of Ising-type models by using the extremely sparse root transfer matrix. __________ Translated from Teoreticheskaya i Matematicheskaya Fizika, Vol. 149, No. 2, pp. 281–298, November, 2006.