羟乙基壳聚糖的合成及其与聚乳酸的相容性

本文以异丙醇为溶剂,碱化壳聚糖与2-氯乙醇反应制备了羟乙基壳聚糖,对产物的结构与性能进行了分析表征;然后以二甲基亚砜为溶剂,采用溶液共混法制备了一系列不同组成的壳聚糖/聚乳酸和羟乙基壳聚糖/聚乳酸复合膜,对两组分间的相容性进行了研究。结果表明,羟乙基化反应在-OH和-NH2上均有发生,壳聚糖单元糖环上的羟乙基取代度为2.46;改性后,壳聚糖结晶性能和起始热分解温度下降,溶解性能得到改善。复合膜的电镜结果显示,在壳聚糖/聚乳酸复合膜中,相分离现象显著存在,壳聚糖在聚乳酸基体中的分散不均匀,有团聚现象,随着壳聚糖含量增加,两组分间的相分离程度增大,团聚现象更为严重,当壳聚糖含量达到50%时,已难以制备完整的复合膜;与之相反,羟乙基壳聚糖/聚乳酸复合膜中两种组分之间的相容性有所改善,相分离现象不明显,并且,当羟乙基壳聚糖含量从10%增加到50%,复合膜中两种组分之间的相容性变化不大。     

Synthesis,Characterization and Catalytic Behaviour of Silica Supported Zinc Salicylaldimine Complex

Zinc salicylaldimine complex immobilized on silica gel was used as a promising catalyst for the transesterification reaction of dimethyl terephthalate (DMT) and ethylene glycol (EG).The catalyst was characterized by Fourier transform infra‐red spectroscopy (FT‐IR), thermogravimetric analysis (TGA) and atomic absorption spectroscopy (AAS). The product bis‐(2‐hydroxyethyl)terephthalate (BHET)was confirmed by mass and ¹H‐NMR studies. In comparison to zinc acetate i.e., homogeneous catalyst, a polymer supported catalyst showed better stability, catalytic activity and ease of separation from the reaction product. The catalyst can be reutilized during successive catalytic cycles.     

Application Properties of Stimuli-Responsive Polyglycerol Hydrogels

Transient state swelling behavior and swelling kinetics of novel stimuli-responsive polyglycerol hydrogels were studied at 293, 310 and 333 K. Depending on temperature, Fickian or anomalous diffusion behavior was observed. Mechanical properties of the hydrogels in the swollen and dry states were investigated and the average molecular weight between crosslinks was calculated. To assess the potential for biodegradation of hydrogels, initial swelling behavior in phosphate buffered saline (PBS) solution and mass loss profiles as a function of degradation time were investigated over a period of 30 days. All swelling behavior, mechanical properties and degradations were clearly affected by the degree of cross-linking. The hydrophilicity and biodegradability of polyglycerol hydrogels make them suitable for pharmaceutical, biomedical and biotechnological applications. They could potentially serve as a substitute for common fossil-based hydrogels such as poly(ethylene glycol) and poly(vinyl alcohol) hydrogels.     

Dye attached poly(hydroxyethyl methacrylate) cryogel for albumin depletion from human serum

Cibacron Blue F3GA was immobilized on poly(hydroxyethyl methacrylate) cryogel and it was used for selective and efficient depletion of albumin from human serum. The poly(hydroxyethyl methacrylate) was selected as the basic component because of its inertness, mechanical strength, chemical and biological stability, and biocompatibility. Cibacron Blue F3GA was covalently attached to the poly(hydroxyethyl methacrylate) cryogel to produce poly(hydroxyethyl methacrylate)-Cibacron Blue F3GA cryogel affinity column. The poly(hydroxyethyl methacrylate)-Cibacron Blue F3GA cryogel was characterized with respect to gelation yield, swelling degree, total volume of macropores, Fourier Transform Infrared spectroscopy, and scanning electron microscopy. It was found that the maximum amount of adsorption (343 mg/g of dry cryogel) obtained from experimental results is very close to the calculated Langmuir adsorption capacity (345 mg/g of dry cryogel). The maximum adsorption capacity for poly(hydroxyethyl methacrylate)-Cibacron Blue F3GA cryogel column was obtained as 950 mg/g of dry cryogel for nondiluted serum. The adsorption capacity decreased with increasing dilution ratios while the depletion ratio of albumin remained as 77% in serum sample. Finally, the poly(hydroxyethyl methacrylate)-Cibacron Blue F3GA cryogel was optimized for using in the fast protein liquid chromatography system for rapid removal of the high abundant proteins from the human serum.     

A system with non-aqueous birefringent microemulsions

Non-aqueous birefringent microemulsions were found in a system ofp-xylene, glycerol, triethanolammonium oleate and oleic acid. The microemulsions showed long term stability once formed, but failed to form spontaneously when the components were contacted. After partial separation by centrifugation, no signs of spontaneous reformation were found.     

Micellization of Sodium Dodecyl Sulfate in Glycerol Aqueous Mixtures

The effect of glycerol on both micellar formation and the structural evolution of the sodium dodecyl sulfate (SDS) aggregates in the context of the action mechanism of the cosolvent has been studied. The critical micelle concentration and the degree of counterion dissociation of the surfactant over a temperature range from 20°C to 40°C were obtained by the conductance method. The thermodynamic parameters of micellization were estimated by using the equilibrium model of micelle formation. The analysis of these parameters indicated that the lower aggregation of the surfactant is mainly due to a minor cohesive energy of the mixed solvent system in relation to the pure water. The effect of glycerol on the mean aggregation number of the micelles of SDS was analyzed by the static quenching method. It was found that the aggregation number decreased with the glycerol content. This reduction in the micellar size seems to be controlled by an increase in the surface area per headgroup, which was ascribed to a participation of glycerol in the micellar solvation layer. Studies on the micropolarity of the aggregates, as sensed by the probe pyrene, indicated that this microenvironmental parameter is almost unaffected by the presence of glycerol in the mixture. However, an increase in the micellar microviscosity at the surface region was observed from the photophysical behavior of two different probes, rhodamine B and auramine O. These results suggest a certain interaction of the cosolvent in the micellar solvation of SDS micelles.     

Microcalorimetric Determination of Serum Triglycerides and Cholesterol

Abstract

Reaction heats measured in a microcalorimeter between varying amounts of human serum and 700 IU of lipase (EC 3.1.1.3) and those between serum and 8 U of cholesterol oxidase (EC 1.1.3.6) were significantly linear with the contents of triglycerides (r=1.00) and cholesterol (r=0.99), respectively. However, when sera from 13 human volunteers were subject to comparative study between the micro-calorimetric and spectrophotometric methods, the correlation became less appreciable (r=0.70 and r=0.71) presumably due to the individual variations in free glycerol and cholesterol ester-constituents that were deliberately omitted in the microcalorimetric method but were routinely included in the standard (multi-enzymatic) spectro-photometric clinical method. The contribution of interfering substances, if any, is not totally ruled out.     

Copolymerization of 2‐hydroxyethyl methacrylate with a comonomer with spiroacetal moiety

The study reports the synthesis of a copolymer based on 2‐hydroxyethyl methacrylate and 3,9‐divinyl‐2,4,8,10‐tetraoxaspiro[5.5]undecane (U) acquired through radical polymerization in the presence of 2,2′‐azobis(2‐methylpropionitrile). The attempt was to have a solid content as high as 10 wt %. The polymerization process was conducted in the presence of a classic ionic surfactant—sodium lauryl sulfate—and comparatively using two variants of protective colloid β‐cyclodextrin and poly(aspartic acid), respectively. The prepared dispersions were characterized from the viewpoint of their hydrodynamic radius, zeta potential, and conductivity evolution during syntheses. The mean particle size and size distribution and zeta potential and conductivity were also evaluated for the synthesized polymeric particles. The compositions of the polymers were confirmed by FTIR and ¹H NMR spectra, and also, the thermal stability of the polymeric compounds was evaluated. SEM and AFM investigations of the polymer morphology are also presented. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Lanthanum immobilized on chitosan: a highly efficient heterogeneous catalyst for facile synthesis of novel (α,β‐unsaturated) β‐aminoketones

A new heterogeneous catalyst, lanthanum immobilized on chitosan, was synthesized and used for the aza‐Michael reaction of β‐enaminone under microwave irradiation. The characteristic structural features of the catalyst were determined using Fourier transform infrared spectroscopy, powder X‐ray diffraction, energy‐dispersive X‐ray spectroscopy, transmission and scanning electron microscopies and inductively coupled plasma atomic emission spectroscopy. The stability of the catalyst was evaluated using thermogravimetric analysis. The use of recyclable catalyst and glycerol as solvent makes this procedure environmentally benign and economically viable. Copyright © 2016 John Wiley & Sons, Ltd.