水热法制备Sb2S3纳米棒有序阵列

以Sb(S₂CNEt₂)₃为单源前驱体，通过改变时间、温度、表面活性剂等反应条件，用水热法成功合成了各种尺寸的Sb₂S₃纳米棒及其有序阵列。X-射线衍射(XRD)、能量分散光谱(EDS)以及选区电子衍射(SAED)研究表明纳米棒由正交晶系Sb₂S₃单晶构成。扫描电子显微镜(SEM)和透射电子显微镜(TEM)研究显示Sb₂S     

THF—FER沸石的系列研究—1．晶体结构稳定性

四氢呋喃（THF）-Na2O-SiO2-Al2O3-H2O体系水热合成的THF-FER沸石，经酸交 换-焙烧脱THF（Ⅰ）或焙烧脱THF-酸交换（Ⅱ）的不同方式处理，均可制得低钠H- FER沸石。经XRD，^27Al与^29Si MAS NMR,低温氮吸附等表征证明，通过1273K高温 的热处理和1073K饱和水蒸气下的水热处理，H-FER沸石骨架保持高度稳定。在高温 水蒸气作用下，Si(2Al）容易从骨架上脱离，而Si(1Al）则保持相对稳定，以（Ⅱ ）方法处理，制备的H-FER沸石在水热条件下易产生较多的硅差劲基缺陷。经高温 热和水热处理后，H-FER沸石孔道结构基本保持完美、开放。     

Syntheses and properties of related polyoxadiazoles and polytriazoles

New aromatic poly-1,2,4-triazoles and poly-1,3,4-oxadiazoles are studied as thermally stable membrane materials. Various groups were introduced onto the pendant phenyl groups of poly-1,2,4-triazoles. Glass transition temperature, degradation temperature, and cold crystallization behavior were studied as a function of these groups. Cold crystallization appeared to be highly sensitive to macromolecular regularity. The solubility of poly-1,3,4-oxadiazoles was highly improved upon incorporation of 5-t-butylisophthalic, 1,1,3-trimethyl-3-phenylindane, 4,4′-(2,2′-diphenyl) hexafluoro propane, and diphenyl ether groups into the polymeric main chain, whereas the high glass transition temperatures and degradation temperatures typical for aromatic poly-1,3,4-oxadiazoles were maintained. © 1994 John Wiley & Sons, Inc.     

Crystallization kinetics of the monoclinic modification of poly(3,3-dimethyl oxetane)

Poly(3,3-dimethyl oxetane) fractions ranging in number average molecular weights from 18500 to 130000 have been isothermally crystallized from the relaxed melt state in the temperature range from 12 to 44 °C, where only the monoclinic modification is formed. The influence of molecular weight and undercooling in crystallization kinetics has been analyzed. The level of crystallinity is very slightly dependent on molecular weight but the influence of this parameter on the time scale of the crystallization is relatively pronounced. The crystallization temperature coefficient was determined and it was found a constant value of the product of the interfacial energies in the range of molecular weights which has been analyzed. Growth rate measurements were carried out for fraction ¯M _n=130000 and it was found that the temperature coefficients for overall and growth rates are equal. Finally, the comparison of the experimental results for this polymer with those reported for poly(oxetane) shows two main differences: first, the crystallization rate is slower for poly(3,3-dimethyl oxetane) and second, the temperature coefficient is smaller for this polymer.     

Fraktionierte Kristallisation von Ammonium- und Magnesiumdoppelnitraten der Ceriterden; Bestimmung der Trennfaktoren und Vergleich der Trennwirkung

Summary The Separation Factors for Pr/La, Nd/Pr, and Sm/Nd, characterizing the crystallization of ammonium and magnesium double nitrates under practical conditions, were determined analytically and are discussed. They confirm that La and Pr can be separated better by fractional crystallization of ammonium double nitrates, whereas in the presence of Sm the magnesium double nitrates are preferable.

     

A Simple Hydrothermal Route to Large‐Scale Synthesis of Uniform Silver Nanowires

This paper describes the preparation of uniform silver nanowires by reducing freshly prepared silver chloride with glucose at 180 °C for 18 hours in the absence of any surfactants or polymers. Scanning electron microscopy studies indicated that the silver nanowires are about 100 nm in diameter and up to 500 μm in length. High‐resolution transmission electron microscopy analyses showed that the silver nanowires grow perpendicularly to the Ag(200) plane. The silver nanowires are believed to grow through a solid–solution–solid process. Some influential factors on the growth of silver nanowires are also discussed.     

Effect of multi-walled carbon nanotubes on non-isothermal crystallization kinetics of polyamide 6

The non-isothermal crystallization behaviors of multi-walled carbon nanotubes (MWNTs)/polyamide 6 (PA6) composites were investigated by differential scanning calorimetry (DSC). Three methods, namely, Avrami, Ozawa and Mo, were carried out to analyze the non-isothermal crystallization data. The results showed that the MWNTs in PA6 acted as effective nucleation agents. However the crystallization rate of composites obtained was lower than that of the neat PA6. It is indicated that the presence of MWNTs influenced the mechanism of nucleation and the growth of PA6 crystallites.     

KIT-1介孔分子筛的化学修饰及吸附性能

介孔分子筛MCM-41具有较大、可调的孔径和较高的比表面积，其骨架组成具有较强的可调变性．为该材料的应用提供了很大的空间。但全硅MCM-41分子筛在潮湿空气中，即使在室温条件下也会发生水解反应，使其介孔结构遭到破坏。前人已针对MCM-41分子筛稳定性不足的问题相继合成了稳定性较高的介孔分子筛KIT-1,     

分子量对聚丙烯等温结晶的影响

<正> 在高聚物结晶动力学的研究中,分子量对结晶速率的影响是一个有实际意义和理论兴趣的研究课题,由于聚烯烃可以得到分子量变化范围相当宽(MW从10~3到10~6)的试样,因而它是研究结晶速率分子量依赖性较合适的对象,其中研究最多的是聚乙烯和聚丙烯。从前入的研究报道看来,影响聚丙烯结晶速率的因素比聚乙烯要复杂。除了聚丙烯可生成多种晶型结构,会影响其结晶速率以外,用不同聚合方法制备的试样,由于其链结     

聚己内酯/硝基纤维素共混体系结晶行为的研究

通过对聚己内酯／硝基纤维素共混体系的热分析、傅立叶变换红外光谱的研究，证实了该共混体系在聚己内酯含量较高时，是一个热力学相容的体系，同时两组分之间存在强的氢键相互作用。在此体系中聚己内酯长成了清晰规整的环带球晶。聚己内酯结晶形态随结晶温度和共混物组成的变化表明，在共混体系中聚己内酯结晶速率与非晶第二组分的扩散速率存在一定的匹配关系，是影响环带球晶形成的重要因素。