THF—FER沸石的系列研究—1．晶体结构稳定性

四氢呋喃（THF）-Na2O-SiO2-Al2O3-H2O体系水热合成的THF-FER沸石，经酸交 换-焙烧脱THF（Ⅰ）或焙烧脱THF-酸交换（Ⅱ）的不同方式处理，均可制得低钠H- FER沸石。经XRD，^27Al与^29Si MAS NMR,低温氮吸附等表征证明，通过1273K高温 的热处理和1073K饱和水蒸气下的水热处理，H-FER沸石骨架保持高度稳定。在高温 水蒸气作用下，Si(2Al）容易从骨架上脱离，而Si(1Al）则保持相对稳定，以（Ⅱ ）方法处理，制备的H-FER沸石在水热条件下易产生较多的硅差劲基缺陷。经高温 热和水热处理后，H-FER沸石孔道结构基本保持完美、开放。     

A Simple Hydrothermal Route to Large‐Scale Synthesis of Uniform Silver Nanowires

This paper describes the preparation of uniform silver nanowires by reducing freshly prepared silver chloride with glucose at 180 °C for 18 hours in the absence of any surfactants or polymers. Scanning electron microscopy studies indicated that the silver nanowires are about 100 nm in diameter and up to 500 μm in length. High‐resolution transmission electron microscopy analyses showed that the silver nanowires grow perpendicularly to the Ag(200) plane. The silver nanowires are believed to grow through a solid–solution–solid process. Some influential factors on the growth of silver nanowires are also discussed.     

KIT-1介孔分子筛的化学修饰及吸附性能

介孔分子筛MCM-41具有较大、可调的孔径和较高的比表面积，其骨架组成具有较强的可调变性．为该材料的应用提供了很大的空间。但全硅MCM-41分子筛在潮湿空气中，即使在室温条件下也会发生水解反应，使其介孔结构遭到破坏。前人已针对MCM-41分子筛稳定性不足的问题相继合成了稳定性较高的介孔分子筛KIT-1,     

Continuous pH monitoring during pretreatment of yellow poplar wood sawdust by pressure cooking in water

Yellow poplar wood sawdust consists of 41% cellulose and 19% hemicellulose. The goal of pressure cooking this material in water is to hydrate the more chemically resistive regions of cellulose in order to enhance enzymatic conversion to glucose. Pretreatment can generate organic acids through acid-catalyzed degradation of monosaccharides formed because of acids released from the biomass material or the inherent acidity of the water at temperatures above 160°C. The resulting acids will further promote the acid-catalyzed degradation of monomers that cause both a reduction in the yield and the formation of fermentation inhibitors such as hydroxymethyl furfural and furfural. A continuous pH-monitoring system was developed to help characterize the trends in pH during pretreatment and to assist in the development of a base (2.0 M KOH) addition profile to help keep the pH within a specified range in order to reduce any catalytic degradation and the formation of any monosac-charide degradation products during pretreatment. The results of this work are discussed.     

不熔化沥青球在低速流化床中炭化和活化的初步研究

不熔化沥青球在低速流化床中炭化和活化的初步研究乔文明，王克温，凌立成，刘朗周承泽，王瑾，郑斌（中国科学院山西煤炭化学研究所，太原０３０００１）（上海太平洋化工（集团）公司焦化总厂，２００２４１）关键词低速流化床，活化，炭化，球形活性炭由于球形活性炭，...     

水热改性对NiMo/γ-Al2O3加氢脱氮催化剂结构及性能的影响

The influence of hydrothermal modification on the structure and hydrodenitrogenation (HDN) activity of NiMo/γ-Al₂O₃catalyst was studied in the range 140～180 ℃. The experimental results indicated that the hydrodenitrogenation reaction rate of pyridine was accelerated using the NiMo/γ-Al₂O₃catalyst synthesized via hydrothermal route due to the change of the structure, the increase of the amount of Mo and Ni and the rise of the specific surface area. The change of the structure of catalysts was enhanced at higher hydrothermal temperature, producing NiMo/γ-Al₂O₃catalyst with better HDN activity.     

Influence of preparation conditions on thermal properties of lanthanide benzenepolycarboxylates

Properties of lanthanide 1,2,4-benzenetricarboxylates and lanthanide 1,2,4,5-benzenetetracarboxylates obtained by a classical synthesis method and under hydrothermal conditions were compared. Solid 1,2,4-benzenetricarboxylates and 1,2,4,5-benzenetetracarboxylates of cerium, neodymium and erbium were prepared by a classical precipitation method. The same lanthanide compounds were obtained also from hydrothermal reaction. All obtained products were examined by elemental analysis. General formulae of complexes were: Ln(1,2,4-btc)·xH₂O and Ln₄(1,2,4,5-btec)₃·yH₂O. The thermal analysis shows that hydrothermal conditions cause the coordination of less number of water molecules to complex molecule. Because lanthanide ions exhibit the most often the coordination number equal 8 or 9 one can conclude that the coordination ability of carboxylic groups under hydrothermal conditions is different from that under mild ones. Probably, in hydrothermal conditions the carboxylic groups of 1,2,4-benzenetricarboxylate ions are able to form more coordination bonds with lanthanide ions than under normal pressure.     

One Novel Vanadium-Phosphate Cluster [PV_(2.5)O_(8.5)]-3.83{H_2O} with Three-Dimensional Architecture

A novel vanadium-phosphate compound [PV_2.5O_8.5]·3.83{H_2O}(1)was obtained from the hydrothermal reac-tion and structurally characterized by elemental analysis and single-crystal X-ray diffraction,which exhibited thatthe title complex crystallized in cubic space group I-43m with crystal data:a=1.6115(1)nm,V=4.1848(1)nm~3,Z=12,D_c=1.783 g/cm~3,F(000)=2278,R_1=0.0528,and wR_2=0.1329[I>2σ(I)](all data).The basic unit of{PV_2.5O_8.5}symmetrically extended to closed sphere-like structure of{P_4V_(10)O_(34)},which was further linked to in-terleaving three-dimensional network via sharing four phosphate through μ_3-oxygen atoms around the closedsphere-like structures.     

溶剂热/水热条件下空旷结构草酸锌的合成

应用水热法及溶剂热方法，选择两种模板剂1，2-丙二胺和4，5-二氮芴-9-酮连氮(L)设计合成了草酸锌空旷结构材料[Zn₂(C₂O₄)3][C₃H₁₂N₂]·H₂O (Ⅰ)和[Zn₂(C₂O₄)₃]·L·6[H₃O] (Ⅱ)，使用CHN元素分析、     

Synthesis, nuclear, and magnetic structures and magnetic properties of [Mn3(OH)2(SO4)2(H2O)2

[Mn(3)(OH)(2)(SO(4))(2)(H(2)O)(2)] and its deuterated analogue were synthesized by a hydrothermal technique and characterized by differential thermal analysis, thermogravimetric analysis, and IR spectroscopy. Its nuclear structure, determined by single-crystal X-ray analysis and Rietveld analysis of neutron powder-diffraction data, consists of a 3D network of chains of edge-sharing Mn(1)O(6), running along the c axis, connected by the apices of Mn(2)O(6) and SO(4) units. It is isostructural to the nickel analogue. Determination of the magnetic structure and measurements of magnetization and heat capacity indicate the coexistence of both magnetic long-range ordering (LRO) and short-range ordering (SRO) below a Néel temperature of 26 K, while the SRO is retained at higher temperatures. The moments of the two independent Mn atoms lie in the bc plane, and that of Mn(1) rotates continuously by 54 degrees towards the c axis on decreasing the temperature from 25 to 1.4 K. While the SRO may be associated with frustration of the moments within a Mn(3) trimer, the LRO is achieved by antiparallel alignment of the four symmetry-related trimers within the magnetic unit cell. A spin-flop field, measured by dc and ac magnetization on a SQUID, is observed at 15 kOe.