Preparation of Li2SnO3 and its application in lithium‐ion batteries

Tin‐based oxide Li₂SnO₃ has been synthesized by a hydrothermal route as negative material for lithium‐ion batteries. The microstructure and electrochemical properties of the as‐synthesized materials were investigated by some characterizations means and electrochemical measurements. The as‐synthesized Li₂SnO₃ is a porous rod, which is composed of many uniform and regular nano‐flakes with a size of 50–60 nm. Li₂SnO₃ also displays an electrochemical performance with high capacity and good cycling stability (510.2 mAh g^?1 after 50 cycles at a current density of 60 mA g^?1 between 0.0 V and 2.0 V verusus Li/Li⁺). Copyright © 2013 John Wiley & Sons, Ltd.     

A Direct and Rapid Route to Synthesize Pd/Si‐MCM‐41 at Room Temperature

The pure silica mesoporous molecular sieve MCM‐41 was synthesized under hydrothermal conditions. Pd/Si‐MCM‐41 was prepared by the incipient wetness impregnation of pure silica MCM‐41 with mixed solution of PdCl₂, ethanol and CH₂Cl₂. The samples were characterized by x‐ray diffraction (XRD), transmission electron microscopy (TEM), and nitrogen adsorption–desorption isotherms at 77 K. The XRD and TEM results reveal that Pd is actually anchored inside the pores of Si‐MCM‐41 and the Si‐MCM‐41 structure is clearly maintained after impregnation.     

Bismuth Tri‐ and Tetraarylcarboxylates: Crystal Structures,In Situ X‐ray Diffraction,Intermediates and Luminescence

A systematic investigation of the systems Bi³⁺/carboxylic acid/HNO₃ for the tri‐ and tetracarboxylic acids pyromellitic acid (H₄Pyr), trimellitic acid (H₃Tri) and trimesic acid (H₃BTC) acid led to the discovery of five new bismuth carboxylates. Structural characterisation allowed the influence of the linker geometry and the Bi³⁺:linker molar ratio in the starting solution on the crystal structure to be determined. The crystallisation of three selected compounds was investigated by in situ energy‐dispersive X‐ray diffraction. Three new crystalline intermediates were observed within minutes, and two of them could be isolated by quenching of the reaction mixture. Their crystal structures were determined from laboratory and synchrotron X‐ray powder diffraction data and allowed a possible reaction pathway to be established. In depth characterisation of the luminescence properties of the three bismuth pyromellate compounds was carried out. Fluorescence and phosphorescence could be assigned to (mainly) ligand‐ and metal‐based transitions. The polymorphs of Bi(HPyr) exhibit different luminescence properties, although their structures are very similar. Surprisingly, doping of the three host structures with Eu³⁺ and Tb³⁺ ions was only successful for one of the polymorphs.     

Synthesis and Morphology Control of AM‐6 Nanofibers with Tailored ‐V‐O‐V‐ Intermediates

Microporous vanadosilicates with octahedral VO₆ and tetrahedral SiO₄ units, better known as AM‐6, have been hydrothermally synthesized with different morphologies by controlling the Na/K molar ratio of the initial gel mixtures. The morphology of the AM‐6 materials changed from bulky cube to nanofiber aggregates as the Na/K molar ratio decreased from 1.9 to 0.2. Raman spectroscopy revealed that the VO₃^? intermediate species plays an important role in the formation of the nanofiber morphology. The orientation of ‐V‐O‐V‐ chains in nanofiber aggregates was examined by confocal polarized micro‐Raman spectroscopy. It was found that these aggregates are assemblies of short ‐V‐O‐V‐ chains perpendicular to the axis of nanofibers. The obtained AM‐6 nanofibers greatly increase the exposed proportion of V? O terminals, and thus improve the catalytic performance.     

硫/水热碳球复合材料的制备及对锂硫电池倍率性能的影响

在锂硫电池正极材料的研究中,碳材料可以有效改善电池倍率及循环性能.为了提高锂硫电池的高倍率放电性能,通过水热合成的方法,制备了由非均匀粒径碳球组成的碳材料.与硫热合成后,硫均匀分布在碳材料表面及周围,复合材料含硫量为52wt%.0.2C放电电流下,首次放电比容量为1174mAh·g^-1,100次循环后放电比容量为788mAh·g^-1.在4C的放电电流下,放电比容量稳定维持在600mAh·g^-1,循环过程中,库伦效率高于90%.该碳材料有良好的导电网络,且制备方便,成本低廉,对于穿梭效应和放电过程中的膨胀效应有一定的抑制作用,是一种优秀的正极材料.     

由草酸及双咪唑基配体构筑的二维锰(Ⅱ)配位聚合物的水热合成及晶体结构

通过水热法合成了一个新的金属-有机配位聚合物[Mn(C2O4)(bimb)]n.0.25nH2O(H2C2O4=草酸,bimb=1,4-双(咪唑基-1-基)丁烷)。并对其进行了元素分析、红外光谱、紫外光谱、热重和X-射线单晶衍射测定。该配合物属于三斜晶系,P1空间群。在晶体结构中,锰原子为六配位与来自2个不同的C2O42-配体上的4个羧基氧原子和来自2个bimb配体上的2个氮原子配位,呈现畸变的八面体几何构型。     

Ca0.8-2x(YbxTb0.1Na0.1+x)2xWO4近红外下转换荧光粉水热合成及发光性质

一种在近红外光谱(NIR)区域高效的量子剪裁现象已在Ca0.8-2x(Ybx Tb0.1Na0.1+x)2x WO4(x=0～0.2)荧光粉中得到证实,该量子剪裁通过吸收紫外线光子发射近红外光子,能量传递包括两个协同过程,分别是WO42-基团到Yb3+离子和WO42-基团到Tb3+离子再到Yb3+离子,Yb3+离子的掺杂浓度对荧光粉在可见光和近红外光谱的发光,荧光寿命和量子效率的影响已进行了详细的研究。经计算,量子效率最大达到135.7%。铽与镱共掺钨酸钙的近红外量子剪裁,通过吸收太阳光谱的1个紫外光子到2个1 000 nm光子(2倍光子数增加)的下转化机制实现高效率硅太阳能电池的途径。     

离子液体辅助水热法合成六方WO3纳米棒束

提出了利用简单的离子液体1-甲基-3-乙基-咪唑溴辅助水热法合成六方WO₃纳米棒束的方法,对其结构进行了表征,并讨论其形成机理。TEM照片表明：WO₃纳米棒束由长200~300 nm、直径25~30 nm的纳米棒组装而成。离子液体1-甲基-3-乙基-咪唑溴在纳米棒的形成过程中起到了结构导向剂的作用。     

含硼杂原子Na-B-ZSM-5分子筛对甲醇脱氢制甲醛反应的催化性能

以白炭黑为硅源、硼酸为硼源、NaOH为碱源、四丙基溴化铵(TPABr)和1,6-己二胺(HMDA)混合模板剂,采用水热合成法制备含硼杂原子Na-B-ZSM-5分子筛,用XRD、SEM、FT-IR、UV-vis、11B MAS NMR、NH3-TPD等方法对其进行表征。在连续流动常压固定床反应器上评价Na-B-ZSM-5分子筛对甲醇脱氢制甲醛反应的催化性能,考察n(Si)/n(B)、n(Na2O)/n(SiO2)、晶化温度和晶化时间等制备参数以及反应温度和质量空速等工艺参数对催化性能的影响。结果表明,硼进入了分子筛的骨架结构中,存在与B酸中心有关的骨架四配位硼和与L酸中心有关的骨架三配位硼,Na-B-ZSM-5分子筛含有较多的弱酸位和少量的中强酸位。催化剂的最佳制备参数为n(Si)/n(B)比值为7.5、n(Na2O)/n(SiO2)比值为0.14、晶化温度170℃、晶化时间48 h。Na-B-ZSM-5(7.5)分子筛在反应温度550℃、质量空速1.85 h-1的反应条件下对甲醇的转化率为62.97%,甲醛的选择性为68.86%。