燃烧系统的离散Boltzmann建模与模拟研究进展

燃烧系统的诸多模拟依托于流体建模, 离散Boltzmann方法(discrete Boltzmann method, DBM) 是近年来发展起来的一种新的流体介观建模方法. 本文简要评述DBM发展的两个方向——Navier-Stokes等偏微分方程的数值逼近解法和复杂系统的微介观动理学建模. 主要介绍在燃烧系统模拟方面DBM已有的工作、新近的思路、与传统流体建模的异同以及近期的研究成果. 本文重点传递的信息为: 作为复杂系统微介观动理学建模出现的DBM在模拟过程中同时给出“流动”及其相伴随的、关系最密切的那部分“热动”非平衡效应; 它为燃烧等复杂系统中各类非平衡行为的描述、非平衡信息的提取、非平衡程度的度量提供了一种简洁、有效的方法; 它所提供的热动非平衡测量量有两类: 一类是直接比较分布函数和平衡态分布函数的动理学矩关系得到的, 一类是来自于Chapman-Enskog多尺度分析给出的热传导和黏性项. 基于第二类DBM, 可以实现(燃烧等)一大类复杂流体系统的多尺度物理建模.     

Improved synthesis of disaccharides with Escherichia coli β-galactosidase using bio-solvents derived from glycerol

A noticeably increase in activity, keeping total regioselectivity was found in the synthetic behaviour of Escherichia coli β-galactosidase in glycerol-based solvents using a 1:7 molar ratio of donor (pNP-β-Gal): acceptor (GlcNAc). Yields of up to 97% of β(1→6) with different solvents were found. These reactions take place without noticeable hydrolytic activity and with total regioselectivity, representing a considerable improvement over the use of aqueous buffer or conventional organic solvents. There is a clear dependence of the catalytic results on the solvent structure, which is analysed in terms of polarity and hydrophobicity.     

Towards the reduction of matrix effects in inductively coupled plasma mass spectrometry without compromising detection limits: The use of argon-nitrogen mixed-gas plasma

The multivariate optimization of a mixed-gas plasma was conducted in an attempt to find conditions minimizing matrix effects without sacrificing the detection limits that are observed with an all argon plasma optimized for maximum sensitivity in inductively coupled plasma mass spectrometry. Compared to the latter, where 49.1 ± 7.1% (n = 17) analyte signal suppression resulted in the presence of 0.1 M Na, 3.8 ± 3.2% suppression (and 2.8 ± 2.1% enhancement in some cases) was observed in the optimized mixed-gas plasma with 0.13% v/v N₂ in the plasma gas and 0.11% in the central channel as a sheath gas around the nebulizer gas flow. Furthermore, improved detection limits were observed for Al, Co, Pd, and V with the optimized mixed-gas plasma compared to an argon plasma at maximum sensitivity. The robustness of this mixed-gas plasma was further demonstrated through the accurate determination of U and Mo in NASS-5 seawater certified reference material using a simple external calibration, without matrix-matching or internal standardization. Indeed, the result obtained for Mo (9.1 ± 1.9 μg/L) was within the 95% confidence interval of the certified value of 9.6 ± 1.0 μg/L, while that obtained for U (3.0 ± 0.2 μg/L) was close to the information value of 2.6 μg/L. Spatial profiling results suggest better energy transfer between the toroidal zone and the central channel in the mixed-gas plasma.     

Synthesis of new intramolecular charge transfer A-D-A tetrathiafulvalene-fused triads exhibiting large solvent sensitive emission behavior

We have synthesized three new acceptor-donor-acceptor (A-D-A) triads incorporating the donor tetrathiafulvalene (TTF) fused with acceptors quinoxaline and dipyrido[3,2-a:2′,3′-c]phenazine (dppz) systems. Solution emission spectral studies of all these compounds show large solvent sensitive behavior with huge Stokes shifts. The large solvent dependence of the emission indicates that the excited state is stabilized in more polar solvents due to the intramolecular charge transfer. We have also described electrochemical studies of one of the title compounds (compound 1b) exhibiting two oxidation responses at 1.02 and 1.31 V versus Ag/AgCl, that correspond to the oxidized species of TTF monocation and dication, respectively.     

Self-assembly approach toward chiral bimetallic catalysts: bis-urea-functionalized (salen)cobalt complexes for the hydrolytic kinetic resolution of epoxides

A series of novel bis-urea-functionalized (salen)Co complexes has been developed. The complexes were designed to form self-assembled structures in solution through intermolecular urea-urea hydrogen-bonding interactions. These bis-urea (salen)Co catalysts resulted in rate acceleration (up to 13 times) in the hydrolytic kinetic resolution (HKR) of rac-epichlorohydrin in THF by facilitating cooperative activation, compared to the monomeric catalyst. In addition, one of the bis-urea (salen)Co(III) catalyst efficiently resolves various terminal epoxides even under solvent-free conditions by requiring much shorter reaction time at low catalyst loading (0.03-0.05 mol %). A series of kinetic/mechanistic studies demonstrated that the self-association of two (salen)Co units through urea-urea hydrogen bonds was responsible for the observed rate acceleration. The self-assembly study with the bis-urea (salen)Co by FTIR spectroscopy and with the corresponding (salen)Ni complex by (1)H NMR spectroscopy showed that intermolecular hydrogen-bonding interactions exist between the bis-urea scaffolds in THF. This result demonstrates that self-assembly approach by using non-covalent interactions can be an alternative and useful strategy toward the efficient HKR catalysis.     

Solvent and TMEDA effects on the configurational stability of chiral lithiated aryloxiranes

The employment of hexane/N,N,N',N'-tetramethylethylenediamine (TMEDA) dramatically hinders the racemization of those lithiated styrene oxides (trifluoromethyl-, chloro-, and phenylthio-substituted) that have been proven to be configurationally unstable in THF on the timescale of their reactions. The barriers to inversion and the activation parameters, calculated (Eyring equation) for reactions performed in THF, THF/TMEDA, and hexane/TMEDA, suggest the intervention of particular enantiomerization mechanisms for each case. The role of TMEDA in both coordinating and noncoordinating solvents has also been questioned and discussed in light of the kinetic data gathered and a model for deprotonation in hexane/TMEDA has also been proposed. The synthetic benefits of our results became apparent on establishing an asymmetric synthesis of an industrially important antifungal agent.     

Selectivity in the addition reactions of organometallic reagents to aziridine-2-carboxaldehydes: the effects of protecting groups and substitution patterns

Good to excellent stereoselectivity has been found in the addition reactions of Grignard and organozinc reagents to N-protected aziridine-2-carboxaldehydes. Specifically, high syn selectivity was obtained with benzyl-protected cis, tert-butyloxycarbonyl-protected trans, and tosyl-protected 2,3-disubstituted aziridine-2-carboxaldehydes. Furthermore, rate and selectivity effects of ring substituents, temperature, solvent, and Lewis acid and base modifiers were studied. The diastereomeric preference of addition is dominated by the substrate aziridines' substitution pattern and especially the electronic character and conformational preferences of the nitrogen protecting groups. To help rationalize the observed stereochemical outcomes, conformational and electronic structural analyses of a series of model systems representing the various substitution patterns have been explored by density functional calculations at the B3LYP/6-31G* level of theory with the SM8 solvation model to account for solvent effects.     

Rational design of zinc-organic coordination polymers directed by N-donor co-ligands

A family of Zn^II‐based metal–organic coordination polymers (MOCPs) [Zn(L)(imid)₂] ( 1 ), [Zn(L)(2,2′‐bpy)] ( 2 ), [Zn₂(L)₂(Py)₃] ( 3 ), [Zn(L)(DPP)]?DMF ( 4 ), [Zn(L)(DPEA)] ( 5 ), [Zn₂(L)₂(4,4′‐bpy)] ( 6 ), [Zn(L)(3,4′‐DPEE)]?DMF ( 7 ), and [Zn₃(L)₃(3,4′‐DPEE)₂]?DMF ( 8 ) (L=dithieno[3,2‐b:2′,3′‐e]benzene‐2,6‐dicarboxylic acid, imid=imidazole, bpy=bipyridine, Py=pyridine, DPP=1,3‐di(pyridin‐4‐yl)propane, DPEA=1,2‐di(pyridin‐4‐yl)ethane, and DPEE=(E)‐3,4′‐(ethene‐1,2‐diyl)dipyridine) have been rationally designed and generated in the solvothermal reaction systems of the new conjugated thiophene derivative L, Zn(ClO₄)₂?6 H₂O, and seven different aromatic N‐donor co‐ligands separately. These N‐donor compounds were carefully selected and employed in the crystal preparation of the eight MOCPs as structure‐directing co‐ligands owing to their structural specialties and habitual coordination fashions. Among these MOCPs, compounds 1 – 3 are 1D polymers with different chain structures. Compounds 4 , 7 , and 8 are 2D structures, in which 4 has two sets of twofold interpenetrating layers, whereas 7 and 8 are both built from three independent sheets. Compounds 5 and 6 are 3D frameworks, in which 5 exhibits a fivefold interpenetrating diamondoid network, whereas 6 shows a typical twofold interpenetrating pillared layer structure with nanoscale channels. The photoluminescent properties of these MOCPs, including excitation, emission, and radiactive lifetime, have also been investigated to help us tentatively understand their structure–property relationships.