Pt 含量对Co@Pt/C核壳结构催化剂性能的影响

采用两步还原法制得Co@Pt/C核壳结构催化剂, 其中Co与Pt 的总质量分数为20%. 通过改变金属前驱体的用量, 制备了不同Co:Pt 原子比的Co@Pt/C 催化剂, 以20% (w) Co@Pt(1:1)/C 与20% (w) Co@Pt(1:3)/C 表示. 采用透射电镜(TEM)、光电子射线能谱分析(XPS)、循环伏安(CV)、线性扫描伏安(LSV)等方法考察了其结构与性能, 并与实验室早先制备的40% (w) Co@Pt/C 催化剂进行了比较. 自制20% Co@Pt(1:1)/C 与20% Co@Pt(1:3)/C 催化剂的金属颗粒直径约为2.2-2.3 nm, 在碳载体上分散均匀, 粒径分布范围较窄, 电化学活性比表面积(ECSA)分别为56 和60 m²·g^-1, 均超过商用催化剂20% Pt/C(E-tek) (ECSA=54 m²·g^-1). 20%Co@Pt(1:1)/C 与20% Co@Pt(1:3)/C 的半波电位相较于40% Co@Pt(1:1)/C 和40% Co@Pt(1:3)/C 均向正向移动, 表现出更好的氧还原(ORR)催化活性, 并有望降低催化剂的成本, 在质子交换膜燃料电池领域表现出良好的应用前景.     

18O同位素标记定量肽段串联体蛋白质结合同位素稀释-多反应监测质谱的蛋白质绝对定量新方法

建立了定量肽段串联体蛋白质(concatamers of Q peptides, QconCATs)结合¹⁸O同位素标记-多反应监测质谱的蛋白质绝对定量新方法。首先对QconCAT重组蛋白质进行了纯度表征,十二烷基硫酸钠-聚丙烯酰胺凝胶电泳(SDS-PAGE)表征结果表明重组蛋白质的纯度在99%以上,相对分子质量约为63.4 kDa。对QconCAT重组蛋白质酶切后的肽段混合物进行质谱分析,并经pFind和pLabel软件处理,验证了目标肽段。还考察了QconCAT重组蛋白质的酶切效率和¹⁸O标记效率,并对QconCAT蛋白质结合¹⁸O标记-同位素稀释-多反应监测质谱方法进行了评价。实验结果表明,采用该方法对腾冲嗜热厌氧菌(Thermoanaerobacter tengcongensis, TTE)中选定蛋白质的肽段进行绝对含量测定时,相对标准偏差小于20%,准确度较高,说明该方法可用于复杂生物样本中蛋白质的绝对定量。更重要的是所建方法不仅解决了细胞培养氨基酸稳定同位素标记(SILAC)技术的重标试剂价格昂贵的问题,也为定量蛋白质组学提供了一种新的方法。     

结构稳定的CuO/TiO2纳米管的功能化溶胶修饰法制备及其催化CO氧化性能研究

以水热处理方法得到的钛酸纳米管为载体,采用含有醋酸铜的功能化钛溶胶对其进行一步浸渍修饰,制备结构稳定的CuO修饰TiO₂纳米管催化剂(CuO/TiO₂NTs)。通过XRD(X-射线衍射)、TEM(透射电子显微镜)、HR-TEM(高倍透射电子显微镜)、XPS(X-射线光电子能谱)、BET(氮气吸附-脱附法)、TPD(程序升温脱附法)等表征材料的结构和性质,并研究其催化CO氧化的性能。研究表明：经过溶胶浸渍处理过程,不仅将功能化铜组分负载在纳米管上,而且纳米管载体的耐热性能明显提高;催化剂载体、铜钛原子比及焙烧温度对催化剂的活性有明显影响,且400℃焙烧的Cu/Ti原子比为1∶5的CuO/TiO₂NTs的活性最高。     

Synthesis of cis-3-arylated cycloalkylamines through palladium-catalyzed methylene sp carbon–hydrogen bond activation

Methylene sp³ carbon–hydrogen bond activation of N-picolinoylcycloalkylamines provides a useful method for synthesizing cis-3-arylated cycloalkylamine derivatives. Pd(II) species catalyzed the γ-arylation of N-picolinoylcycloalkylamines with aryl iodides in the presence of silver carbonate to afford cis-3-arylated N-picolinoylalkylamines in up to 87% yield. Hydrolysis of the amide linkage to give the corresponding cis-3-arylated cycloalkylamines was also demonstrated.     

One-pot synthesis of tryptanthrin by the Dakin oxidation of indole-3-carbaldehyde

A one-pot approach to indolo[2,1-b]quinazolines from indole-3-carbaldehydes through the Dakin oxidation was developed. It was shown that the reaction proceeded through the condensation of indole-3-carbaldehydes with isatoic anhydrides, derived in situ from indole-3-carbaldehydes by the Dakin oxidation, and further oxidation/cyclization steps.     

Characterization of the patina formed on a low tin bronze exposed to aqueous hydrogen sulfide

The dark gray corrosion layer (patina) formed on the surface of a polished low tin bronze alloy following exposure to a deoxygenated and saturated aqueous solutions of H₂S has been characterized by X‐ray photoelectron spectroscopy, scanning electron microscopy‐energy dispersive spectroscopy and X‐ray diffraction. The system represents a model for bronze corrosion in reducing conditions where sulfate‐reducing bacteria in soils or deoxygenated seawater may generate H₂S during respiration. The initial surface was dominated by metallic copper together with Sn, Pb and Zn oxides and hydroxides. Surface enrichment of Pb and Zn was noted because of a smearing effect during polishing. At least some of the lead was crystalline. In contrast, the corrosion layer formed by H₂S(aq) exposure was dominated by polycrystalline Cu₂S (low and high chalcocite) and smaller concentrations of CuSO₄ · nH₂O. This surface was enriched with Zn as Zn(OH)₂. Lead was present as redeposited PbS (galena) crystallites in at least two different morphologies. Unlike bronzes exposed to oxidizing conditions, which develop protective SnO₂ layers, the H₂S(aq)‐exposed surface was considerably depleted in Sn. Copyright © 2014 John Wiley & Sons, Ltd.     

Naryl-substituted anthranilamides with intramolecular hydrogen bonds

Hydrogen bonding interaction as one type of non-covalent force has proven itself to be highly efficient for constructing structurally unique artificial secondary structures. Here, the structure of N_aryl-substituted anthranilamide in solution is demonstrated by various NMR technique, the intramolecular hydrogen bonds between amide attached to arylamine of the same ring is proposed, which is supported by its crystal structure in the solid phase. The substituent on the nitrogen atom of arylamine plays an important role in forming the presence of intramolecular hydrogen bonds. The chemical shift of the N_aryl-H downfield changes obviously, due to the formation of intramolecular hydrogen bonds and the deshielding effect of oxygen, and the neighboring C–H is activated and shows downfield protonic signal too. The presence of intramolecular hydrogen bonds probably provides the explanation for the transformation from N_aryl-substituted anthranilamide to imine, which could be converted into 2-aryl quinazolinone finally.     

Kinetics of radical‐molecule reactions in aqueous solution: A benchmark study of the performance of density functional methods

The performance of 18 density functional approximations has been tested for a very challenging task, the calculations of rate constants for radical‐molecule reactions in aqueous solution. Despite of the many difficulties involved in such an enterprise, six of them provide high quality results, and are recommended to that purpose. They are LC‐ωPBE, M06‐2X, BMK, B2PLYP, M05‐2X, and MN12SX, in that order. This trend was obtained using experimental data as reference. The other relevant aspects used in this benchmark are: (i) the SMD model for mimicking the solvent; (ii) the conventional transition state, the zero‐curvature tunneling correction, and the limit imposed by diffusion for the calculation of the rate constants. Even though changing any of these aspects might alter the trend in performance, at least, when using them, the aforementioned functionals can be successfully used to obtain high quality kinetic data for the kind of reactions investigated in this work. © 2014 Wiley Periodicals, Inc.     

Cooperativity and cluster growth patterns in acetonitrile: A DFT study

Cooperativity in intermolecular interactions and cluster growth patterns of acetonitrile has been studied using M06L density functional theory. Cyclic, ladder‐type, stacked, cross‐stacked, and mixed patterns are studied. Total interaction energy (E_int) and interaction energy per monomer (E_m) show maximum stability and cooperativity in stacked clusters followed by cross‐stacked ones. As cluster size increased, magnitude of E_m showed significant increase. Compared to E_m of dimer (?2.97 kcal/mol), the increase is 2.6‐fold for 27mer . Higher stabilization in larger clusters is attributed to strong cooperativity in intermolecular C? H···N and dipolar interactions. Enhanced cooperativity in stacked structures is supported by atoms‐in‐molecule electron density (ρ) data. Sum of ρ at intermolecular bond critical points is the highest for stacked clusters. Further, area of negative‐valued molecular electrostatic potential is linearly related with E_int and showed the lowest value in stacked followed by cross‐stacked clusters, indicating maximum utilization of lone pair density and maximum cooperativity in such growth patterns. A red shift in the average C? N stretching frequencies with increase in the number of monomers and its direct correlation with E_int in stacked clusters also supported their stability. Further, two known crystal patterns of acetonitrile (α and β) with 16 monomers are optimized and compared with the most stable hexadecamer pattern and are found to show lower values for E_int and E_m compared to the latter. Based on this result, we predict the existence of a third crystal pattern for acetonitrile which will be more ordered and more stable than α and β forms. © 2014 Wiley Periodicals, Inc.     

The READY program: Building a global potential energy surface and reactive dynamic simulations for the hydrogen combustion

READY (REActive DYnamics) is a program for studying reactive dynamic systems using a global potential energy surface (PES) built from previously existing PESs corresponding to each of the most important elementary reactions present in the system. We present an application to the combustion dynamics of a mixture of hydrogen and oxygen using accurate PESs for all the systems involving up to four oxygen and hydrogen atoms. Results at the temperature of 4000 K and pressure of 2 atm are presented and compared with model based on rate constants. Drawbacks and advantages of this approach are discussed and future directions of research are pointed out. © 2014 Wiley Periodicals, Inc.