正火和回火处理过程中W/Fe/RAFM钢接头W/Fe界面组织和剪切性能的演化

对热等静压(HIP)扩散焊制备的W/Fe/RAFM钢接头进行了正火和回火处理,以恢复其中RAFM钢的组织和性能.采用电子探针微分析器(EPMA)和掠入射X射线衍射(GIXRD)对W/Fe界面组织的演化进行了分析,采用剪切测试和扫描电镜(SEM)对接头连接性能的演化进行了测试和分析.结果表明,正火处理后,RAFM钢中的C...     

Purification of Hydrogen from CO with Cu/ZSM-5 Adsorbents

The transition to a hydrogen economy requires the development of cost-effective methods for purifying hydrogen from CO. In this study, we explore the possibilities of Cu/ZSM-5 as an adsorbent for this purpose. Samples obtained by cation exchange from aqueous solution (AE) and solid-state exchange with CuCl (SE) were characterized by in situ EPR and FTIR, H₂-TPR, CO-TPD, etc. The AE samples possess mainly isolated Cu²⁺ cations not adsorbing CO. Reduction generates Cu⁺ sites demonstrating different affinity to CO, with the strongest centres desorbing CO at about 350 °C. The SE samples have about twice higher Cu/Al ratios, as one H⁺ is exchanged with one Cu⁺ cation. Although some of the introduced Cu⁺ sites are oxidized to Cu²⁺ upon contact with air, they easily recover their original oxidation state after thermal treatment in vacuum or under inert gas stream. In addition, these Cu⁺ centres regenerate at relatively low temperatures. It is important that water does not block the CO adsorption sites because of the formation of Cu⁺(CO)(H₂O)_x complexes. Dynamic adsorption studies show that Cu/ZSM-5 selectively adsorbs CO in the presence of hydrogen. The results indicate that the SE samples are very perspective materials for purification of H₂ from CO.     

基于高斯曲率极值点的桥梁结构损伤识别方法

目前中小桥梁日常安全巡检存在对检查人员依赖性高、缺乏可量化的科学依据等不足.针对这些问题,本文提出了一种利用高斯曲率极值点对结构进行损伤识别的方法.将桥面视为受弯弹性薄板,根据弹性薄板的弯曲理论得到了在荷载作用下结构刚度变化与桥面弯曲程度(高斯曲率)的理论关系,并由此推导了高斯曲率对结构刚度损伤的敏感程度公式.通过有限...     

常压化学气相沉积技术生长ZnO:H薄膜的光学性质

采用常压金属有机物化学气相沉积技术(AP-MOCVD),以二乙基锌(DEZn)为Zn源,去离子水(H2O)为氧源,N2作载气,在外延ZnO薄膜的反应气氛中通入少量氢气,在c-Al2O3衬底上生长出了ZnO∶H薄膜。用X射线双晶衍射和光致发光谱对ZnO∶H薄膜的结晶性能和光学性质进行表征。结果表明,ZnO∶H薄膜(002)和(102)面的Ω扫描半峰全宽分别为46.1 mrad和81.4 mrad,表明该薄膜具有良好的结晶性能;室温下,ZnO∶H薄膜具有较强的紫外光发射(380 nm),在低温10 K光致发光谱中观测到位于3.3630 eV处与氢相关的中性施主束缚激子峰(I4)及其位于3.331 eV处的双电子卫星峰(TES)。采用退火的方法,通过观测I4峰的强度变化,研究了氢在ZnO∶H薄膜中的热稳定性。发现随着退火温度的升高,I4峰的强度逐渐减弱,表明在高温下退火,氢会从ZnO薄膜中逸出。     

环境友好助洗剂——4A沸石

介绍了4A沸石的结构、性质及其作为洗涤助剂等方面的应用和国内外发展状况。     

微孔配位聚合物作为新型储氢材料的研究

微孔配位聚合物性质独特、结构多样,具有广泛的应用前景,它已成为近几年来一个热门的研究领域。本文简要介绍该类化合物作为一种新型的储氢材料,在合成、结构和储氢性能方面的研究进展。     

Production of COx-Free Hydrogen and Few-Layer Graphene Nanoplatelets by Catalytic Decomposition of Methane over Ni-Lignin-Derived Nanoparticles

Nickel (Ni)-lignin nanocomposites were synthesized from nickel nitrate and kraft lignin then catalytically graphitized to few-layer graphene-encapsulated nickel nanoparticles (Ni@G). Ni@G nanoparticles were used for catalytic decomposition of methane (CDM) to produce COx-free hydrogen and graphene nanoplatelets. Ni@G showed high catalytic activity for methane decomposition at temperatures of 800 to 900 °C and exhibited long-term stability of 600 min time-on-stream (TOS) without apparent deactivation. The catalytic stability may be attributed to the nickel dispersion in the Ni@G sample. During the CDM reaction process, graphene shells over Ni@G nanoparticles were cracked and peeled off the nickel cores at high temperature. Both the exposed nickel nanoparticles and the cracked graphene shells may participate the CDM reaction, making Ni@G samples highly active for CDM reaction. The vacancy defects and edges in the cracked graphene shells serve as the active sites for methane decomposition. The edges are continuously regenerated by methane molecules through CDM reaction.     

溴化二水二(皮考林酰胺)合钴配合物的合成及晶体结构

用皮考林酰胺、六水合硝酸钴和苄基溴反应制得一种新配合物[(C6H6N2O)2Co(H2O)2].B r2,通过红外光谱、元素分析及X射线晶体衍射对化合物进行了表征.结构分析结果表明,配合物属单斜晶系,P2(1)/n空间群,晶胞参数为:a=0.647 61(5)nm,b=1.026 43(9)nm,c=1.264 14(11)nm,β=93.823 0(10),°V=0.838 44(12)nm3,Z=4,Dc=1.977 g/cm3,μ=5.812 mm-1,F(000)=490,R1=0.071 0,wR2=0.251 6.配合物中,Co(Ⅱ)离子为六配位的八面体构型;相邻单元间通过N—H…B r和O—H…B r氢键相互连结而形成三维网状结构.     

基于(C-H)+…X-氢键作用的阴离子识别与传感的研究进展

对基于(C—H)+…X-氢键类型的阴离子识别以及识别过程所引起的光化学传感和电化学传感的研究进展进行了评述.     

Recent Progress in Homogeneous Catalytic Dehydrogenation of Formic Acid

Recently, there has been a strong demand for technologies that use hydrogen as an energy carrier, instead of fossil fuels. Hence, new and effective hydrogen storage technologies are attracting increasing attention. Formic acid (FA) is considered an effective liquid chemical for hydrogen storage because it is easier to handle than solid or gaseous materials. This review presents recent advances in research into the development of homogeneous catalysts, primarily focusing on hydrogen generation by FA dehydrogenation. Notably, this review will aid in the development of useful catalysts, thereby accelerating the transition to a hydrogen-based society.