Chemical bond in alkali metal sulfates

In the context of the density functional theory of the local electron density the valence and differential density distribution in crystalline sulfates of M₂SO₄ (M is Li, Rb, and Cs) and double sulfates of MLiSO₄ were calculated using the pseudopotential method in the basis set of numerical atomic pseudo-orbitals. It is shown that in lithium sulfate crystallographically inequivalent oxygen atoms are in different charge states and have a different force of chemical bonding with sulfur. Anions are bonded to each other through lithium atoms that form tetrahedral complexes with oxygen. In rubidium sulfates the electron clouds of the anions overlap and chain structures form. Chemical bonding between the anion and the cation has an ionic nature. These features of the electron structure manifest themselves in double sulfates, where LiO₄ complexes that link the anionic chains also form, and heavy metals serve as cations.     

低钴AB5型稀土系贮氢电极合金的研究

为了进一步降低AB5型混合稀土系贮氢合金的成本,采用Cr,Si,Cu替代Co和调节化学计量比的方法制备低钴AB5型贮氢合金。结果表明:3种取代元素在寿命方面的效果依次为Si>Cr>Cu,在放电容量和活化性能方面依次是Cu>Cr>Si。Cr,Cu,Si只有少量的替代才可能发挥其有利影响;通过非化学计量比的调节,低钴混合稀土系贮氢电极合金的放电容量、活化性能及倍率放电能力都能较好地达到实用要求,但是循环寿命有待提高。     

Synthesis,Reactivity, and Structural Characterization of Dioxovanadium(V) Complexes with Tridentate Schiff Base Ligand: Vanadium Complexes in Supramolecular Networks

The synthesis, characterization and crystal structure analysis of the ammonium salt of the dioxovanadium(V) complex NH₄[VO₂(salhyph)] with the tridentate Schiff base ligand derived from salicylaldehyde and benzoic acid hydrazide (H₂salhyph) is reported. NH₄[VO₂(salhyph)] crystallizes in the monoclinic space group Pn with a = 708.8(2), b = 1444.3(3), c = 717.1(2) pm and β = 101.09(2)°. The vanadium atom of the dioxovanadium(V) moiety has a distorted square‐pyramidal coordination geometry. Extensive hydrogen bonding is observed between the ammonium cation and the oxygen atoms coordinated to the vanadium atom yielding to a two‐dimensional network, where the complex anions are arranged in a bilayer. Additional crystal packing within the bilayer appears to be controlled mostly by π stacking between the aromatic rings of the ligand. The reactions of NH₄[VO₂(salhyph)] with several proton acidic compounds including water, methanol, and proton acids lead to neutral monooxovanadium(V) and dioxovanadium(V) complexes ([VO₂(Hsalhyph)], [V₂O₃(salhyph)₂] and [VO(OMe)(salhyph)(HOMe)]).     

Synthesis,Conformation, and Metabolism of a Selenium Bilirubin

Summary. A symmetrical C(10)-selena-bilirubin analog, 8,12-bis(2-carboxyethyl)-7,13-dimethyl-2,3,17,18-tetraethyl-10-selenabiladiene-ac-1,19(21H,24H)-dione was synthesized from 8-(2-carboxyethyl)-2,3-diethyl-7-methyl-(10H)-dipyrrin-1-one in one step by reaction with diselenyl dichloride. The selena-rubin exhibited UV-vis and NMR spectroscopic properties similar to those of the parent mesobilirubin, and like bilirubin and mesobilirubin, it adopts an intramolecularly hydrogen-bonded conformation, shaped like a ridge-tile but with a steeper pitch. The longer C–Se bond lengths (2.2Å) and smaller bond angles at C–Se–C (88°), as compared to C–CH₂–C (1.5Å, 106°), lead to an interplanar angle between the two dipyrrinones of only 72°, which is considerably less than that of bilirubin (100°) and close to that (74°) of its 10-thia-rubin analog. Despite the conformational distortion, the sensitivity of Se toward oxidation and the typically weak C–Se bond, the selena-rubin is metabolized in normal rats, like bilirubin, to acyl glucuronides, which are secreted into bile. In mutant (Gunn) rats lacking bilirubin glucuronosyl transferase (UGT1A1), glucuronide or other metabolites of the selena-rubin were not detected in bile, demonstrating the importance of hepatic glucuronidation for its biliary excretion.     

Kinetic determination of trace levels of selenium(IV) and total selenium by Nile Blue A/hydrogen peroxide method

A kinetic method for the determination of selenium(IV) traces is proposed, based on its inhibitory action on the oxidation of Nile Blue A by hydrogen peroxide in phosphate buffer (pH 10.5). A linear dependence was established between the rate of the proposed indicator reaction and selenium concentration in the range 9.5 × 10^–2-1.58 ng cm^–3. The experimental conditions of maximal selenium effect were established. Selenium, determined by the tangent method, was determined at concentrations over the range 0.22–1.26 ng cm^–3, with relative standard deviations up to 4.5%. The reaction rate was followed spectrophotometrically. The effect of foreign ions on the accuracy of this method was also investigated. The method was applied to the determination of selenium in pharmaceutical preparations and wheat flour.     

Gas chromatographic analysis of traces of hydrogen sulfide in hydrogen

Summary A simple gas chromatographic method has been developed for analysis of hydrogen sulfide in hydrogen at the 0.5 to 100 ppm level. After enriching the traces of hydrogen sulfide by absorption in a gas loop packed with the chosen column support at 77 K it was determined by using a Chromosorb G column with silicone 550 and phthalic anhydride as liquid phases, hydrogen as carrier gas and a thermal conductivity detector. The detection limit was found to be about 0.5 ppm of hydrogen sulfide.     

槲皮素伏安行为及其稀土络合物极谱催化氢波研究

在乙醇量小于5％的水溶液中，于pH1.5至4.5，4.2至9.5分别得到槲皮素的两个还原波，均为羰基两电子还原．前者为其分子的强吸附波，后者为一价阴离子的波．在pH6.1附近的醋酸盐缓冲底液中，可获得槲皮素与Tb（Ⅲ）、Dy（Ⅲ）、Ho（Ⅲ）、Er（Ⅲ）、Tm（Ⅲ）、Yb（Ⅲ）、Lu（Ⅲ）和Y（Ⅲ）等重稀土离子络合物的双重表面催化氢波．络合物被诱导吸附，组成为（REL_2）L_吸．Sc（Ⅲ）与槲皮素形成单一表面催化氢波，其组成为（ScL）L_吸．     

Prediction of Complexation Properties of Crown Ethers Using Computational Neural Networks

A computational neural network method was used for the prediction of stability constants of simple crown ether complexes. The essence of the method lies in the ability of a computer neural network to recognize the structure-property relationships in these host-guest systems. Testing of the computational method has demonstrated that stability constants of alkali metal cation (Na+, K+, Cs+)-crown ether complexes in methanol at 25 °C can be predicted with an average error of ±0.3 log K units based on the chemical structure of the crown ethers alone. The computer model was then used for the preliminary analysis of trends in the stabilities of the above complexes.     

N,N-二甲基甲酰胺中电沉积制备镁镍储氢合金

采用恒电位沉积法, 选用适宜的添加剂和络合剂, 成功地从N,N-二甲基甲酰胺(DMF)中沉积出致密的黑色Mg-Ni储氢合金膜. 并初步探讨了其共沉积机理. XRD显示沉积层中含有非晶态Mg-Ni相和微晶态Mg相. SEM图及相应能谱图分析表明合金颗粒以团聚状态存在, 合金成分不是很均匀. AAS分析表明沉积合金中Mg的原子摩尔分数达27.3%. LAND电池测试系统测得所镀合金膜的放电比容量最高为172.4 mAh/g.     

基于支持向量机的羰基化合物红外光谱研究

设计了一个4层分等级分类系统，通过支持向量机技术对羰基化合物的红外光谱成功地进行了信息分类和提取，并与人工神经网络进行比较，结果表明：支持向量机对羰基类化合物红外光谱分类效果优于人工神经网络；另外详细探讨了表征酰胺类化合物的特征光谱峰片段对识圳伯仲叔酰胺的影响，证明了酰胺的N-H伸缩振动峰对识别伯仲叔酰胺贡献最大，为构建红外光谱智能解析系统提供了定量依据。