Developments on carbon dioxide reduction: Their promise,achievements, and challenges

CO₂ reduction processes continue to be developed for electrosynthesis, energy storage applications, and environmental remediation. A number of promising materials have shown high activity and selectivity to target reduction products. However, the progress has been mainly at a small laboratory scale, and the technical challenges of large scale CO₂ reduction have not been considered adequately. This review covers recent advancements in catalyst materials and cell designs. The leading materials for CO₂ reduction to a number of useful products are presented with their corresponding cell and reactor designs. The latest efforts to progress to industrially relevant scales are discussed, along with the challenges that must be met for carbon dioxide reduction to be a viable route for mass scale production.     

Self-assembled,wormlike-cylinder network of polystyrene-block-poly(ethylene oxide) micelles in solution

We report the formation of a highly entangled and interconnected, self-assembled, wormlike-cylinder network of polystyrene-block-poly(ethylene oxide) in N, N-dimethylformamide/water. In this system, N,N-dimethylformamide was a common solvent and water was a selective solvent for the poly(ethylene oxide) blocks. The degrees of polymerization of the polystyrene and poly(ethylene oxide) blocks were 962 and 227, respectively. The network was formed at copolymer concentrations higher than 0.4 wt % and consisted of self-assembled, wormlike cylinders that were interconnected by Y-shaped, T-shaped, and multiple junctions. The network morphology was visualized with transmission electron microscopy. Capillary viscometry measurements revealed an order-of-magnitude increase in the inherent viscosity of the colloidal system upon the formation of the network. A similar effort to obtain a wormlike-cylinder network in an N,N-dimethylformamide/acetonitrile system, in which acetonitrile was a selective solvent for the poly(ethylene oxide) blocks, was unsuccessful even at high copolymer concentrations; instead, the wormlike cylinders showed a tendency to align. The viscosity measurements also did not show a substantial increase in the inherent viscosity. Thus, the solvent played a critical role in determining the formation of the self-assembled, wormlike-cylinder network. This formation of the network resulted from an interplay between the end-capping energy, bending energy (curvature), and configurational entropy of the self-assembled, wormlike-cylinder micelles that minimized the free energy. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 3605–3611, 2006     

一个新的噻二唑衍生物H2ADTZ与锰的二维聚合物的合成与晶体结构(英)

A new 1,3,4 thiadiazole-derivative ligand 2,5-(s-acetic acid) dimercapto-1,3,4 thiadiazole (H₂ADTZ) and its one-dimensional manganese polymer Mn(ADTZ)·4H₂O had been synthesized and structurally characterized by X-ray single crystal diffraction in this paper. The Mn(Ⅱ) ion is coordinated with a distorted octahedron by two oxygen atoms from neighboring two deprotonated ligands ADTZ^2- and other four oxygen atoms from four coordinated water molecules. The structural feature of the title compound is the formation of one-dimensional manganese chains polymer through the bridging of dioxygen O-O units. In the solid state structure of the complex, one-dimensional manganese chains are joined together by the weak intermolecular hydrogen bonds and vander Waals interactions forming a two-dimensional supramolecular compound. Furthermore, the UV spectra and electro-chemical properties of the title compound were also investigated. CCDC: 260532.     

Electrochemical Characteristics of Mg0.9Ti0.1-xZrxNi （x=0.02, 0.04, 0.06） Alloys

Mg-based hydrogen storage alloys Mg0.9Ti0.1-xZrxNi (x=0.02, 0.04, 0.06) were successfully prepared by means of mechanical alloying (MA). The effects of Zr addition on the discharge capacity and the cycle performance of the Mg-based electrodes were also studied. It was found that the discharge capacities were improved with addition of a small amount of Zr and the cycle performances of the alloy were stabilized with the addition of Ti. The effects of surface modification or coating on the properties of Mg0.9Ti0.06Zr0.04Ni were also studied. The results indicated that coating with graphite improved both the discharge capacity and cycle life of the amorphous Mg0.9Ti0.06Zr0.04Ni electrode.     

超分子三维氢键网络：{[Cu(phen)3](SO4)(H3PCA)2(8H2O)}的晶体结构

A new complex， {[Cu(phen)₃](SO₄)(H₃PCA)₂(8H₂O)}， was synthesized and structurally characterized by single-crystal X-ray analysis. The complex is composed of copper cations， sulfate anions， 1，10-phenanthroline， protocatechuic acid and lattice water molecules. The structure of H₃PCA， SO₄^2- and waters comprises packing of anionic three-dimensional network by hydrogen bonds with cavities. The complex can be considered as a model of host/guest supramolecule. The three-dimensional hydrogen-bonding network is the host species. The Cu(phen)₃²⁺ cations， guest species， occupied the cavities of the host. And the results demonstrate that the form of protocatechuic acid at pH< 1 should be free ligand. CCDC： 191733.     

Synthesis and Crystal Structur of (4,4''-H2bipy)[CdBr4]·H2O

The title compound (4,4'-H2bipy)[CdBr4]·H2O 1 has been synthesized via hydrothermal reaction and characterized by X-ray diffraction. The crystal belongs to monoelinic,space group P21/c with a=8.260(3), b=23.926(7), c=9.774(2) (A), β=106.777(9)°,C10H12Br4CdN2O, Mr=608.26, V=1849.4(9)(A)3, Z=4, Dc=2.185 g/cm3, S=1.005, μ(MoKα)=9.814 mm-1, F(000)=1128, R=0.0646 and wR=0.0989. The crystal structure analysis of 1reveals that the title compound features an isolated structure, based on discrete 4,4'-H2bipy moieties and lattice water molecules which are linked by hydrogen bonds together with tetrahedral cadmium atoms terminally coordinated by four bromine atoms.     

Optimization of the Microwave-Assisted Saponification and Extraction of Organic Pollutants from Marine Biota Using Experimental Design and Artificial Neural Networks

Several improvements in sample pretreatment for the determination of organic pollutants (i.e. n-alkanes, polycyclic aromatic hydrocarbons, PAHs) in marine biota (mussels) are presented. The use of liquid nitrogen and homogenization of the samples are shown to be an alternative to the time consuming liophilization step required for the analysis of biota samples. Microwave-assisted hydrolysis and extraction are combined to isolate organic pollutants (19 n-alkanes and 27 PAHs) from biota matrices. Experimental design (ED) and artificial neural networks (ANNs) were used to optimize the experimental conditions. NIST-CRM 2978 was used to test the validity of the developed method which shows a good agreement with certified values.     

On the representation of electrostatic fields around ab initio charge distributions

Summary We compare two methods (Mulliken charges and a distributed multipole analysis, DMA) of representing an ab initio charge distribution for calculating the electrostatic field and potential outside the molecule, using pyrimidine and the RNA base uracil as examples. This is done using a 3-D graphical display of the electrostatic fields, which, when used with real-time rotation, zooming and clipping, has many advantages for qualitatively assessing the electrostatic interactions of a molecule. The errors involved in using Mulliken point charges may be of similar magnitude to the total electrostatic field in regions which are important in recognition processes. The DMA representation automatically includes the anisotropic electrostatic effects of non-spherical features in the charge distribution of each atom, and yet the displayed electrostatic fields around the atoms which have lone-pair density do not show marked anisotropy.     

Thermodynamic quantities for the interaction of SO 4 2− with H+ and Na+ in aqueous solution from 150 to 320°C

The aqueous reactions,