Short Te …︁ Te bonding contacts in a new layered ternary telluride: Synthesis and crystal structure of 2D Nb3GexTe6 (x ≃ 0.9)

The new layered ternary compound Nb₃Ge_xTe₆ (x ? 0.90) was prepared by direct combination of the elements taken in the stoichiometric proportions 3 : 1 : 6, heated at 1 000 °C for 10 days in silica tubes and quenched to room temperature. The phase crystallizes in the orthorhombic symmetry, space group Pnma (#62), with the following single crystal refined parameters: a = 643.18(5) pm, b = 1391.98(11)pm and c = 1 154.07(5) pm, with Z = 4. The structure was refined to an R of 3.4% (R_w = 4.6%), with 1969 independent reflexions and 49 parameters. The structure is based on the close stacking of trigonal prismatic (TP) slabs in the AA/BB mode. The slabs can be seen as built up from face sharing biprisms, which are filled either by one or by two niobium cations situated in the middle of the trigonal prisms. The germanium is located in the middle of the common face of two prisms, leading to a rather unusual anionic square coordination. The refinements showed that this latter cation does not fill completely its square site. No cation was found in the van der Waals gap between the slabs. The mean d_{Ge? Te} distance (276.5 pm) is in agreement with Ge^II cations, while some Te …? Te distances (from 333.84 to 361.65pm) are too short for anions in a simple contact. These bonding distances, already mentionned in some MTe₂ compounds, are to be ascribed to charge transfer in the structure, with a partial oxidation state for the tellurium anions. Short Nb? Nb and Nb? Ge distances (292.0 and 281.3 pm, respectively) imply intercationic bonding within the slabs.     

Hydrogen bonded layer-by-layer assembly of poly(2-vinylpyridine) and poly(acrylic acid): Influence of molecular weight on the formation of microporous film by post-base treatment

This article describes the buildup of hydrogen bonded multilayer film of poly(2-vinylpyridine) (P2VP) and poly(acrylic acid) (PAA), and the influence of polymer molecular weight on the formation of microporous film by post-base treatment. The formation of a microporous film involved a two-step mechanism: the release of PAA from P2VP/PAA multilayer, and the reorganization of the remaining P2VP on the substrate. Fourier transform infrared spectroscopy (FT-IR) indicated that the release of PAA from hydrogen bonded multilayer was a rapid process, which was almost independent of the molecular weight of PAA. Furthermore, the molecular weight of P2VP had a great effect on micropore formation by immersing the P2VP/PAA multilayer in basic solution. The rate of micropore formation increased with increasing molecular weight. We anticipate that a comparative study on P2VP/PAA films containing high or low molecular weight polymer provides a way to control the surface morphology, and will be helpful and constructive for the forthcoming discussion about the formation of the microporous film.     

Some features of RuCl3-catalyzed periodate oxidation of 3-N-substituted 5-allenyl-2,5-dichloro-4,4-dimethoxycyclopent-2-en-1-ones

3-N-Substituted 5-(1Z-carboxymethylene)-2-chloro-4,4-dimethoxycyclopent-2-en-1-ones have been prepared from the corresponding 3-N-substituted 5-allenyl-2,5-dichloro-4,4-dimethoxycyclopent-2-en-1-ones using selective oxidative cleavage of their allene bond by the RuCl₃−NaIO₄ system. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 1646–1648, September, 1997.     

Quantum-chemical calculation of a spillover model on a graphite support

The simplest quantum-chemical models of hydrogen spillover over a graphite-like surface as a proton or radical have been considered. The condensed planar C₂₄H₁₂ molecule was used as a model surface. Theab initio calculations of the interaction of hydrogen with the model surface were carried out by the restricted Hartree-Fock (HF) method in the STO-3G and 6-31 G^* basis sets. The radical hydrogen can not bind to such a surface, whereas the proton binds to it with an energy release of 186 kcal mol⁻¹. The activation energy of the transfer of the proton between two neighboring carbon atoms (10 kcal mol⁻¹) has been determined. The simplest model of the hydrogen migration as a proton over the model surface can be used for describing the spillover of hydrogen over the graphite surface. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 3, pp. 428–430, March, 1997.     

Fibre optic fluorometric enzyme sensors for hydrogen peroxide and lactate,based on horseradish peroxidase and lactate oxidase

An optical biosensor for the determination of hydrogen peroxide based on immobilized horseradish peroxidase is described. The fluorescence of the dimeric product of the enzyme catalysed oxidation of homovanillic acid is utilized to determine the concentration of H₂O₂. The membrane-bound enzyme is attached to a bifurcated fibre bundle permitting excitation and detection of the fluorescence by a fluorometer. The response of the sensor is linear from 1 to 130 M hydrogen peroxide; the coefficient of variation is 3%. The sensor is stable for more than 10 weeks. The operating pH for maximal sensor response is 8.15. This allows the sensor to be used in combination with oxidase reactions producing hydrogen peroxide, as is demonstrated with a co-immobilized lactate oxidase-horseradish peroxidase optode for the determination of L-lactate. The fluorescence intensity of this sensor depends linearly on the concentration of lactate between 3 and 200 M and a throughput of 10 samples per hour is possible. The precision is in the same range as that of the monoenzyme optode. The lifetime of the bienzyme sensor for lactate is considerably shorter than that of the peroxidase sensor; it is limited by the stability of the immobilized lactate oxidase enzyme. The sensor has been applied to the determination of lactate in control serum.     

N,N,N′-Trialkyl-1,8-diaminonaphthalenes: convenient method of preparation from protonated proton sponges and the first X-ray information

A simple procedure for the synthesis of N,N,N′-trialkyl-1,8-diaminonaphthalenes is described. It consists in partial demethylation (dealkylation) of commercially available proton sponge [1,8-bis(dimethylamino)naphthalene] and some of its derivatives at heating with HBr-KI-DMF system. Limitation, scope and a possible mechanistic pathway for the reaction are discussed. For isomeric 8-dimethylamino-1-methylamino- and 1-dimethylamino-8-methylamino-4-nitronaphthalenes, X-ray measurements have been conducted. The first examples of complete realkylation reactions in the naphthalene proton sponges are reported.     

Study on the Anion Recognition Properties of Synthesized Receptors （Ⅲ）： Convenient Synthesis and Anion Recognition Property of Bisthiosemicarbazone Derivative

A new series of bisthiosemicarbazone derivative receptors(1,2 and 3)have been synthesized by simple steps ingood yields.Their anion recognition properties were studied by UV-Vis and ~1H NMR spectroscopy.The resultshowed that the receptors 1,2 and 3 all had a better selectivity to F~-,CH_3COO~- and H_2PO_4~-,but no evidentbinding with Cl~-,Br~-,I~-,NO_3~- and HSO_4~-.Upon addition of the three anions to the receptors in DMSO,thesolution acquired a color change from colorless to dark yellow that can be observed by the naked-eyes,thus the re-ceptors can act as fluoride ion sensors even in the presence of other halide ions.The data showed that it was regularthat the three receptors had different binding ability with the three anions.For the same anion,the association con-stants followed the trend:receptor 1>3>2.The UV-Vis data indicates that a 1:1 stoichiometry complex isformed through hydrogen bonding interactions between compound 1,2 or 3 and anions.     

On the nature of the surprisingly small (red) shift in the halothane...acetone complex.

The halothane???acetone and fluoroform???acetone complexes are studied using the second‐order Møller–Plesset (MP2) method with a cc‐pVTZ basis set and the density functional theory (DFT) method with a TZVP basis set. Whereas halothane exhibits a small red shift upon complexation, fluoroform shows a pronounced blue shift. To explain this difference in behavior, we perform symmetry‐adapted perturbation theory (SAPT) and natural bond orbital (NBO) analyses. Although the composition of the total stabilization energy of each complex is different, that alone does not provide a satisfactory explanation for the difference in the spectral shifts. This difference is interpreted as a result of the interplay of the hyperconjugation and rehybridization mechanisms. The small and surprising red shift of the C? H stretching frequency of halothane, which resulted from the complexation of this species with acetone,is explained by the compensation of the two above‐mentioned mechanisms. On the other hand, the fluoroform???acetone complex exhibits a blue shift of the C? H stretching frequency upon complexation, the most likely reason for this shift being a concerted occurrence of the hyperconjugation and rehybridization mechanisms. The calculated shift of the C? H stretching vibration frequencies of halothane (+27 cm^?1) agree with the experimental value of +5 cm^?1.     

Ab initio SCF investigation of the intramolecular hydrogen bonding in δ-aminopentanoic acid

The potential energy surface of the neutral form of-aminopentanoic acid was investigated by means of ab initio 4-31G SCF calculations. Four symmetry unique local minima are stabilized by an intramolecular O-H NH₂ hydrogen bond. The geometries, energies, and wave numbers of these conformers are reported. The hydrogen bond is discussed with respect to all reactions of these conformers and in comparison with the homologues glycine,-alanine, and-aminobutyric acid and also with the bimolecular adducts between formic acid, acetic acid, and propionic acid, on the one hand, and ammonia, methylamine, and ethylamine, on the other hand.     

用双氧水绿色氧化环己酮合成己二酸的研究

以30%的双氧水为氧化剂, 钨酸钠与含N或O的双齿有机配体(草酸)形成的络合物为催化剂, 在无有机溶剂、无相转移剂的条件下, 研究了环己酮氧化制己二酸的反应. 研究结果表明, 用廉价的草酸为配体, 最佳反应条件为钨酸钠∶草酸∶环己酮∶30%的双氧水的物质的量比为2.0∶3.3∶100∶350, 在92 ℃下反应12 h, 可制得80.6%的己二酸; 用GC-MS跟踪了氧化过程中三种主要物质环己酮、己内酯及己二酸含量随反应时间的变化关系, 提出了其主要氧化机理为环己酮首先经Beayer-Villiger氧化反应生成己内酯, 己内酯进一步氧化成己二酸.