Iridium Anodic Oxidation to Ir(III) and Ir(IV) Hydrous Oxides

Iridium oxide films (IROFs) are known to have an enhanced or the so‐called super‐Nernstian (<59 mV/pH) pH‐sensitivity. The intention in the present study was to find out the reasons of such behavior and also to elucidate the nature of iridium anodic oxidation processes. The methods employed were combined cyclic voltammetry and chronopotentiometry. Iridium layers of 0.1 to 0.2 μm thickness, deposited thermally on titanium or gold‐plated titanium substrates, were used for investigations. IROFs on the surface of working electrodes were formed anodically by applying a constant potential in deaerated and oxygen‐containing solutions of 0.5 M H₂SO₄, 0.1 M KOH and 0.5 M H₃PO₄+KOH. Linear pH‐dependences of the stationary open‐circuit potential with the slopes close to 59 mV/pH were found for iridium electrode oxidized at 0.4 V–0.8 V (RHE) in deaerated and at 0.8 V–1.2 V (RHE) in O₂‐containing solutions. They were attributed to reversible Ir/Ir(OH)₃ and Ir/ IrO₂?nH₂O metal‐oxide electrodes, respectively. It has been suggested that the main current peaks seen in the voltammograms of iridium electrode in acid and alkaline solutions are of different nature. The difference between iridium electrode surface states in acid and alkaline solutions has been presumed to be the main reason of super‐Nernstian pH‐sensitivity of the IROFs. On the basis of the results obtained standard potential of Ir/Ir(OH)₃ electrode and the solubility product of Ir(OH)₃ have been evaluated: =0.78±0.02 V and K_sp=3.3×10^?64.     

Novel siloxane polymers as polymer electrolytes for high energy density lithium batteries

A variety of disubstituted (double-comb) polysiloxane polymers have been prepared containing linear, branched, and cyclic oligoethyleneoxide units, –(OCH₂CH₂)_n–, in the side chains and as part of the siloxane backbone. Copolymers, using mixtures of linear ethylene oxide side chains, were also synthesized. These polymers were doped with LiN(SO₂CF₃)₂ (LiTFSI, 1) and conductivities of the polymer-salt complexes were determined as a function of temperature and doping level. The maximum conductivity of these polymers at 25 ° C was 2.99 ×10^–4, for a copolymer containing equimolar amounts of side chains with n = 5 and 6.     

Evaluation of single-ion conductances in nonaqueous solvents at 25°C by the use of tetrabutylammonium tetrabutylboride as a reference electrolyte

Precise conductances for tetrabutylammonium tetrabutylboride (Bu₄NBBu₄) at 25°C have been measured in a number of nonaqueous solvents, and the data have been analyzed by the 1957 Fuoss-Onsager conductance equation. Limiting ion conductances for the Bu₄N⁺ ion at infinite dilution ₀(Bu ₄ N ⁺) in various solvents have been evaluated by dividing ₀ values of the salt into two equal parts. The ₀(Bu ₄ N ⁺) values so obtained are in fairly good agreement (within±0.1–3.5%) with the corresponding values determined from direct transference number measurements in these solvents.     

The relaxation field for the general case of electrolyte mixtures

The relaxation field for solutions of mixed electrolytes of any type is calculated. the calculation is based on the well-known treatment due to Fuoss-Onsager with the same distance parameter for all the ions in solution. A general conductance-continuity equation has been established and an improved iterative method of calculation, using Laplace transforms, is proposed. The relaxation-field results are derived to the second iteration in the perturbation method of integration.     

Electroconduction of Potassium Orthophosphate Modified with Triple-Charged Cations

Solid electrolytes in the systems K_{3 – 3x} Me _x PO₄ (Me = Sc, Y, In, La, Nd, Gd, Tb) are synthesized. Their phase composition and the temperature and concentration dependences of their electroconductivity are studied. In all the systems there form solid solutions based on K₃PO₄, which have a high potassium cation conductance. The latter is due to the formation of potassium vacancies at substitutions 3K⁺ Me³⁺ and, at lower temperatures, to stabilization of a high-temperature -modification of potassium orthophosphate. The electroconductivity of synthesized solid solutions, which equals (4–7) × 10^–3 and 10^–1 S cm^–1 at 300 and 700°C, is similar to that of solid electrolytes K_{3 – x} P_{1 – x} E _x ^VIO₄ and K_{3 – 4x} E _x ^IVPO₄.     

Preparation and characteristics of photocrosslinkable hydrophilic polymer having cinnamate moiety

The reaction of copolymer of N,N-dimethylacrylamide (DMAA) and bromoethyl methacrylate with potassium cinnamate produced water-soluble photosensitive polymers. Photosensitive polyDMAA films were irradiated with a 400 W high-pressure mercury lamp (λ > 280 nm) to produce crosslinked polymers, which were swollen in water. The degree of swelling was controlled by the irradiation time and content of cinnamate moieties in copolymers. Higher cinnamoylation and longer irradiation time resulted in higher yield of crosslinked polymers and less swellability. Partial degelation upon irradiation at λ ～ 254 nm was observed. The advantage of gelation via photodimerization over conventional chemical crosslinking methods is discussed in conjunction with biomedical applications. © 1992 John Wiley & Sons, Inc.     

Synthesis and characterization of PVP/AAc copolymer hydrogel and its applications in the removal of heavy metals from aqueous solution

Chelating poly(vinylpyrrolidone/acrylic acid) (PVP/AAc) copolymer hydrogels were prepared by radiation-induced copolymerization. The effects of preparation parameters such as PVP content in the hydrogel and irradiation dose on the swelling behavior of the hydrogel were studied. The pH dependent swelling was investigated. The thermal stability of the prepared hydrogel and the metal chelated ones was characterized by TGA. The removal of Fe(III), Cu(II), and Mn(II) from aqueous solution by the prepared PVP/AAc chelating hydrogel was examined by batch equilibration technique. The influence of treatment time, pH, and the initial feed concentration on the amount of the metal ions removed was studied. The results show that the removal of the metal ion followed the following order: Fe(III) > Cu(II) > Mn(II). The amounts of the removed metal ions increased with treatment time and pH of the medium. To re-use the hydrogel, the metal ions were stripped by using 2 N HCl.     

Thermoresponsive nanostructured poly(N-isopropylacrylamide) hydrogels made via inverse microemulsion polymerization

The synthesis of nanostructured poly(N-isopropylacrylamide) (polyNIPA) hydrogels by a two-stage polymerization process is reported here. The process involves the synthesis of slightly crosslinked polyNIPA nanoparticles by inverse (w/o) microemulsion polymerization; then, these particles are dried, cleaned and dispersed in an aqueous solution of NIPA and a crosslinking agent (N,N-methylene-bis-acrylamide or NMBA) and polymerized to produce the nanostructured hydrogels. Their swelling and de-swelling kinetics, volume phase transition temperatures (T _VPT) and mechanical properties at the equilibrium swollen state are investigated as a function of the weight ratio of polyNIPA particles to monomer (NIPA). The nanostructured gels exhibit larger equilibrium water uptake, faster swelling and de-swelling rates and similar T _VPT than those of the conventional ones; moreover, the elastic and Young moduli are larger than those of the conventional hydrogels at similar swelling ratios. The fast swelling and de-swelling kinetics are explained in terms of the controlled inhomogeneities introduced by the method of synthesis.     

Surface forces in wetting films

A short review of various components of surface forces acting in a non-symmetrical system such as wetting films is presented here. Experimental results are compared with modified DLVO theory, which includes, besides dispersion and electrostatic, structural (solvation) forces caused by a change in liquid structure in conditions of confined geometry. The peculiarities of disjoining pressure isotherms and conditions of the film stability of non-polar and polar simple liquids, as well as of aqueous solutions of electrolytes and surfactants, are systematically considered from a historical perspective.     

Electro-Oxidative Selective Esterification of Methylarenes and Benzaldehydes

A mild and green electro-oxidative protocol to construct aromatic esters from methylarenes and alcohols is herein reported. Importantly, the reaction is free of metals, chemical oxidants, bases, acids, and operates at room temperature. Moreover, the design of the electrolyte was found critical for the oxidation state and structure of the coupling products, a rarely documented effect. This electro-oxidative coupling process also displays exceptional tolerance of many fragile easily oxidized functional groups such as hydroxy, aldehyde, olefin, alkyne, as well as neighboring benzylic positions. The enantiomeric enrichment of some chiral alcohols is moreover preserved during this electro-oxidative coupling reaction, making it overall a promising synthetic tool.