Determination of total fluoride in HF/HNO3/H2SiF6 etch solutions by new potentiometric titration methods

In the photovoltaic industry the etching of silicon in HF/HNO₃ solutions is a decisive process for cleaning wafer surfaces or to produce certain surface morphologies like polishing or texturization. With regard to cost efficiency, a maximal utilisation of etch baths in combination with highest quality and accuracy is strived. To provide an etch bath control realised by a replenishment with concentrated acids the main constituents of these HF/HNO₃ etch solutions including the reaction product H₂SiF₆ have to be analysed. Two new methods for the determination of the total fluoride content in an acidic etch solution based on the precipitation titration with La(NO₃)₃ are presented within this paper. The first method bases on the proper choice of the reaction conditions, since free fluoride ions have to be liberated from HF and H₂SiF₆ at the same time to be detected by a fluoride ion-selective electrode (F-ISE). Therefore, the sample is adjusted to a pH of 8 for total cleavage of the SiF₆²⁻ anion and titrated in absence of buffers. In a second method, the titration with La(NO₃)₃ is followed by a change of the pH-value using a HF resistant glass-electrode. Both methods provide consistent values, whereas the analysis is fast and accurate, and thus, applicable for industrial process control.     

Development and prevalidation of a method for phenol determination by solid-phase spectrophotometry

A simple, sensitive and rapid solid-phase spectrophotometric procedure was developed for the determination of traces of phenol with 4-aminoantipyrine as a reagent (AAP-SPS), and the optimal experimental conditions were established. This method was performed by sorption and direct absorbance measurements of the product phenol-AAP sorbed on the anion-exchanger Dowex 1-X4 (0.2 g) at 495 nm (absorption maximum) and 700 nm (non-absorption wavelength). The sensitivity offered by the AAP-SPS procedure was higher by a factor of 40 compared with the respective conventional spectrophotometric method. Metrological characteristics were established using a prevalidation strategy. The AAP-SPS procedure is characterized by a linear calibration function in the working range of 0.05–0.50 μmol, low standard deviation of procedure (±0.012), low limit of determination (0.021 μmol), and favorable random (±0.85 to ±11.27%) and systematic deviations (−4.55 to +11.50%). Moreover, the accuracy of the system investigated by the recovery test is acceptable (99–102%). Favorable working and performance characteristics make the new SPS method ideal for phenol monitoring in pharmaceutical preparations as well as other matrices.     

催化极谱法连续测定岩石中钨和钼

本文提出了在二苯基乙醇酸-二苯胍-氯酸钠催化极谱体系测钨后,加入少许钛铁试剂,使钼产生一个极灵敏的导数波。谊波形尖锐、对称,便于测量钼。建立的连测体系简便灵敏,用于岩石样品中钨和钼的测定,取得了满意的效果。     

离子选择电极—流动注射分析法动力学测定葡萄糖存在下的果糖

本文将离子电极与流动注射分析相结合，利用３０℃下，在强碱性介质中，果糖和葡萄糖与２，４－二硝基酚钠反应速度明显差异，动力学测定了葡萄糖存在下果糖的含量。自制了２，４－二硝基酚电极作为动力学电位测定用的工作电极。本法测定果糖的范围为０．０２～１．００ｍｏｌ／Ｌ，其ＲＳＤ为４．０％～４．９％，ＲＥ为１．０～５．０％；当Ｃ葡／Ｃ果≤３倍时，葡萄糖的干扰不超过５％；本法也曾成功地用于果葡萄浆测定，其ＲＳＤ     

新显色剂二溴对甲基偶氮甲磺光度测定稀土的研究和应用

研究了新显色剂二溴对甲基偶氮甲磺光度测定铈组稀土总量的方法，在酸性介质中，试剂与以铈组稀土为代表稀土形成蓝色配合物，在６４４ｎｍ有最大吸收，铈含量在０～１５μｇ／２５ｍｌ范围内符合比耳定律，方法应用于钢铁中铈组稀土总量的直接测定，发现其准确性和重视性良好。     

盐酸浸提-电感耦合等离子体发射光谱法测定烟草中的多元素

研究了用5mol/L盐酸煮沸提取烟叶中的部分金属元素，用ICP－AES测定浸提液，K、Ca、Mg、Cu、B、Ba、Zn获得了较满意的结果，P、Fe、Mn的测定结果稍微偏低。此方法操作简便、快速安全，特别适合大批量烟草样的快速检测。与硝酸－高氯酸湿消化法进行对照，结果吻合得较好。并测定了国家烟草标准样品GBW08514和GBW08515，其结果与标准值相符。     

1－芳酰基－4－芳基氨基脲类化合物的合成及表征

利用N－取代三氯乙酰胺与芳基酰肼反应，合成了6个新的1－芳酰基－4－芳基 氨基脲类化合物，其结构经IR，^1H NMR和元素分析证实。初步生物活性测试表明 ，具有一定的除草活性。     

苏州荠苧总黄酮与微量元素含量的测定

采用分光光度法测定了苏州荠芋的总黄酮含量；采用了等离子发射光谱法测定了其元素含量。结果表明，苏州荠芋总黄酮的含量分别为55．31mg/g(7月采收)、65．00mg/g(8月采收)；含K、Ca、Mg等多种常量元素；含Cu、Fe、Mn、Zn、Cr、Co等多种人体必需的微量元素，其中Fe含量最高；而有害重金属元素Hg未检出，Pb和AS的含量均较低(小于药典规定量)。可见8月采收的苏荠芋总黄酮含量较高，苏州荠芋含多种人体必需的微量元素，有害重金属含量低，具有较大的开发价值。     

Direct determination of sulfite in food samples by a biosensor based on plant tissue homogenate

In the work described here, a biosensor was developed for the determination of sulfite in food. Malva vulgaris tissue homogenate containing sulfite oxidase enzyme was used as the biological material. M. vulgaris tissue homogenate was crosslinked with gelatin using glutaraldehyde and fixed on a pretreated Teflon membrane. Sulfite was enzymatically converted to sulfate in the presence of the dissolved oxygen, which was monitored amperometrically. Sulfite determination was carried out by standard curves, which were obtained by the measurement of consumed oxygen level related to sulfite concentration. Several operational parameters had been investigated: the amounts of plant tissue homogenate and gelatin, percentage of glutaraldehyde, optimum pH and temperature. Also, some characterization studies were done. There was linearity in the range between 0.2 and 1.8 mM at 35 °C and pH 7.5. The results of real sample analysis obtained with the biosensor agreed well with the enzymatic reference method using spectrophotometric detection.     

Unusual reaction of α-diketones of the indole series with hydrazine

Symmetrical and unsymmetrical α-diketones of the indole series were synthesized by the Friedel-Crafts reaction of 3-indolylglyoxyl chlorides with heterocycles. A nonconventional reaction of N-unsubstituted diketones with hydrazine producing 3H-pyrazolo[3,4-c]quinoline derivatives was found. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 5, pp. 862–866, May, 2006.